The focus of this work is an auxiliary-assisted 4:1 dual-inductor hybrid (DIH) converter for fast transient response in 48 V PoL applications. The flying capacitor of the DIH converter is utilized as the energy buffer for the auxiliary stage, which is a low-cost, GaN-based bidirectional buck converter. The main DIH converter delivers the dc load power from the 48 V bus using an average-current-mode-control scheme, while the auxiliary stage regulates the output voltage with an output-capacitor-current (OCC) sensing scheme. The proposed architecture operates with a virtual auxiliary voltage bus with minimal auxiliary capacitance, $C_\text{AUX}$ , due to the OCC-sensing scheme. A 40 W prototype has been fabricated to validate the proposed architecture with the virtual bus concept. The prototype achieves a peak efficiency of 93.8% and regulates the output voltage of 1 V within $\pm$ 50 mV during 20 A load transients with an output capacitance of only 800 µF. Experimental results validate the operation of the virtual bus with $C_\text{AUX}$ = 0.47 µF during 20 A load transients while observing a deviation of 4.7 V on the 12 V auxiliary virtual bus voltage, $V_\text{AUX}$ .
This article presents an auxiliary-assisted hybrid dc–dc converter for 48 V automotive voltage regulator modules (VRMs) that enable adaptive inductor-current slew-rate control for ultrafast transient response. The main stage, a 4:1 dual-inductor hybrid (DIH) dc–dc converter, delivers the dc load power, while the output voltage is regulated by a GaN-based auxiliary-buck stage that is accoupled by a buffer capacitor. The main stage regulates the output of the ac-coupled auxiliary stage using an average-current-mode-control (ACMC) scheme to achieve adaptive control of the auxiliary-inductor-current slew rate. The auxiliary ac-coupled buck (ACB) converter regulates the output voltage based on an output-capacitor current-based hysteretic-current-mode-control (HCMC) scheme. An adaptive-voltage-positioning (AVP) scheme is proposed for the auxiliary capacitor, which preemptively positions the ACB output voltage for improved transient response. A small-signal model of the auxiliary-assisted converter is presented for stability analysis and validated with simulation results. A 40 W proof-of-concept prototype was fabricated to demonstrate the feasibility of the adaptive slew-rate control technique and AVP scheme. The prototype achieves a peak efficiency of 90.6% with an output capacitance of 500 μF and an auxiliary capacitance of 22 μF, while maintaining the output voltage deviation within 50 mV.