8 December 2022 in IEEE Sensors Journal
Auto-Tuning Integrated Circuits (ICs), interconnected with Radiofrequency Identification (RFID) antennas in the UHF band, can provide digital information about the changes in the local boundary conditions in the proximity of the device. This feature, in conjunction with a varactor diode, can be used to create a general purpose framework for the controlled wireless sensing of chemical agents. The varactor works as a transducer converting the potentiometric output of a chemical sensor into a capacitance change, which in turn is detected by the IC. A constrained optimization method is here introduced to maximize the sensitivity of the above transduction mechanism by deriving closed-form expressions that relate the digital output of the IC to the chemical variation. In this way, said variation will be optimally mapped within the retuning dynamic range of the IC. The method is demonstrated with reference to a pH sensor and is capable of providing a sensitivity of 30 units per unitary pH variation with stable communication performance. Moreover, the application to an on-body plaster-like antenna, namely when there are not fully controllable boundary conditions, demonstrated that the sensing performance is practically unaffected by the placement region over the human body as well as by the inter-user variability.
29 November 2024 in IEEE Journal of Radio Frequency Identification
Fingerprinting stands as an effective non-intrusive and non-destructive method to ensure physical security in wireless systems and Radio-Frequency Identification (RFID) applications. Conventionally, the most common state of the art approach involves extracting signal features from the devices and employing machine learning techniques for the classification of counterfeit or cloned ones. This paper explores how to enhance RFID antenna electromagnetic fingerprints by proposing a multi-power interrogation approach. Unlike traditional methods, our technique emphasizes the non-linear behavior of RFID integrated circuits (ICs) by properly varying the reader input power and frequencies. This strategy increases the unpredictability of the IC impedance modulation, thereby extracting richer and more complex information from the RFID tags. Using Shannon Information Theory, we can quantify the entropy of these enhanced fingerprints, revealing an average increase of almost 2 bits in the information content compared to single-power level interrogations. Our findings can lay the foundations to implement more robust RF physical unclonable functions (PUFs) with robust physical keys against counterfeiting and replication threats.
18 August 2025 in IEEE Antennas and Propagation Magazine
The evolution of prosthetics has been significantly shaped by advancements in biomedical engineering and state-of-the-art technologies. A notable breakthrough in this domain is the emergence of wireless implantable devices, representing a transformative shift in implant design and functionality. These prostheses aim to restore lost functionalities and seamlessly integrate with the human body, offering therapeutic and diagnostic capabilities when equipped with embedded sensors. However, wireless prostheses require through-the-body communication links with external readers, achieved through minimal structural alterations to preserve core functionalities and without batteries and complex electronics for biocompatibility and miniaturization. Such challenges can be addressed through two approaches: utilizing the prosthesis structure as a radiating element according to the paradigm of structural antennas and employing passive battery-less communication platforms operating in backscattering. The feasibility of these approaches, focusing on the ultrahigh-frequency (UHF) band (860–960 MHz), is demonstrated in this article through theoretical formalization, case studies, and in vitro measurements, with insights into materials and manufacturing processes provided.
24 January 2024 in IEEE Journal of Radio Frequency Identification
The dense distribution of wireless sensors based on Ultra-High-Frequency (UHF) Radio-Frequency Identification (RFID) technology, in the food market or drug cold chains, raises issues regarding the effects of mutual electromagnetic coupling on sensing. In the case of stacked items, in fact, inter-antenna coupling can cause disturbance to sensor measurements, thus affecting the specificity and reliability of the collected data. This paper experimentally investigates the effects of coupling for some configurations of antenna size and alignments by exploiting capacitive sensing based on the emerging auto-tuning integrated circuit (IC) architectures. The results revealed that electromagnetic coupling typically induces cross-sensitivity and instability so that the variation of any sensor’s output will also be indirectly captured by adjacent devices. However, this disturbing effect vanishes after a threshold decoupling distance of the order of 4 mm for a small-footprint loop (15mm×15mm), and 15 mm in the case of a card-like footprint (C-dipole, 54mm×16mm). Moreover, experiments revealed that the above distances can be halved by resorting to a 180∘ rotation of the adjacent items.
15 January 2026 in IEEE Journal of Radio Frequency Identification
As the demand for RFID-enabled systems grows, sustainability and circularity are becoming key drivers of innovation in tag and antenna design. Laser-Induced Graphene (LIG) offers a low-impact and recyclable alternative to metal conductors, enabling green, chemical-free, and energy-efficient fabrication compatible with eco-friendly substrates and material recovery. Yet, its high surface resistance limits radiation efficiency and complicates impedance matching with highly reactive UHF-RFID chips. This work presents a numerical and experimental comparison of distributed and lumped matching techniques for LIG dipoles, quantifying their contribution to power loss and overall efficiency. Distributed networks (e.g., T-match, notch) introduce large insertion losses (10–20 dB) due to differential-mode currents, while lumped configurations minimize energy dissipation and preserve material efficiency. The best trade-off between performance and sustainability is obtained with a single inductor (enabling realized gains around −5 dBi) for medium impedances, whereas for loads with a very low real part, an eventually reusable small metallic loop is required to ensure conjugate matching with negligible environmental impact. The proposed guidelines enable energy- and material-efficient LIG-based RFID antennas, offering a practical route toward eco-compatible and circular wireless systems that combine high RF performance with sustainable design principles.