6 June 2024 in Measurement
5 May 2024 in Materials Today Communications
15 May 2016 in Journal of Vibroengineering
Based on the working principle of magnetorheological fluid damping, in this paper, a set of squeezing mode Magneto-rheological Fluid (MRF) dampers is designed for drilling vibration suppression in deep hole machines. Elaborate analysis of the correlativity between the dynamic morphology trajectory of the machined hole surface, the vibration of the drilling tool-shaft, and the theoretical derivation of the damping force, is put forward in accordance with the Bingham model and Euler-Bernoulli beam Equation. Simultaneously, the contrast analysis of the vibration suppression effect is carried out through the drilling experiments with and without an MRF damper. In addition, a series of measurements on the vibration characteristics of the drilling shaft, the drilling tool and the guide surface wear patterns, and the machine hole surface are analyzed, respectively. Both the drilling experiments and theory studies have revealed that the strength of the magnetic field changed with the drill shaft at different levels of vibration. The MRF damper could suppress the vibration with nonlinear characteristics initiatively and instantaneously, by variable damping, which can eventually improve the surface roughness. In addition, according to the phenomenon of tool tipping, the breakage of the guide bars and the machine hole surface deduces the condition of the vibration effect objectively.
1 August 2025 in Physica Scripta
The nonlinear ultrasonic response to early plastic damage of metal materials is the result of multiple defects. The contributions of typical defects (vacancy atoms, interstitial atoms, edge dislocations, screw dislocations, grain boundaries, grains, twins and extrinsic stacking faults) to the ultrasonic nonlinear effects has not been reported. In this paper, the ultrasonic propagation model of a single defect in single crystal aluminum was established using the molecular dynamics method. The nonlinear ultrasonic response of each typical defect and the intrinsic relationship between the defect parameters and the acoustic nonlinearity were investigated. Meanwhile, the influence of these typical defects on linear acoustic parameters was also studied. Finally, a multi-defect coupling model incorporating vacancy atoms and other defects was established to analyze the interaction mechanisms of ultrasonic nonlinear parameters with positive/negative contribution coupling. This provides microscopic insights for determining critical defect configurations and assessing damage states associated with mechanical property degradation in metallic materials.
1 December 2017 in Vibroengineering PROCEDIA
Dynamics of deep-hole drilling shaft system is closely related to hole processing quality. From the viewpoint of rotor dynamics and fluid-structure interaction, the governing equation of the drilling shaft system for lateral vibration is obtained taking into account of fluid-structure interaction, rotational inertia, gyroscopic effect, the effect of motion constraints and frictional damping generated by surrounding fluid. The influence of rotational angular velocity and compressive axial force on transient vibration of drilling shaft is mainly examined. It has been found that rotational angular velocity has an obvious effect on the lateral vibration of drilling shaft, whereas the lateral vibration of drilling shaft does not change significantly with the increase of compressive axial force.
15 November 2017 in Journal of Vibroengineering
Numerical investigation is conducted into the nonlinear dynamic responses to fluid-structure interaction in deep-hole drilling shaft system. Based on the theories of pipes and tubes conveying fluid, the governing equation of the drilling shaft system is obtained taking into account of the fluid-structure interaction and the effect of the motion constraints. The nonlinear partial differential governing equation of motion is discretized in modal space using the Galerkin method and then transformed into a set of ordinary different equations. Numerical solutions of these equations are then obtained using the fourth order Runge-Kutta method. The influence of the forcing frequency and the support constraints on the dynamic behaviors of the drilling shaft is examined. The nonlinear dynamic behaviors of the drilling shaft system are presented by the bifurcation diagram and phase diagram. It has been found that the magnitude of support stiffness and the number and position of support constraints have a significant influence on dynamic behaviors of the drilling shaft system. The study in the paper provides an effective guidance to maintain the stability of the BTA deep-hole drilling shaft system through selecting the favorable operation parameters in deep hole drilling process.