Inchan Ju

Inchan Ju

Auto-generated profile, based on publicly available information

Inchan Ju

Department of Electrical and Computer Engineering, Department of Intelligence Semiconductor Engineering, Ajou University, Suwon, South Korea

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 May 2020 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
IJInchan Ju
Inchan Ju
YGYunyi Gong
Yunyi Gong
JCJohn Cressler
John Cressler
This article presents the design of a highly linear high-power silicon-germanium (SiGe) heterojunction bipolar transistor (HBT) 802.11ac/ax wireless local area network (WLAN) power amplifiers (PAs). The challenges associated with electrothermal effects on the dynamic operation of WLAN PAs are first discussed. We then propose the design methods that take into account the electrothermal transient effect to improve linear output power (POUT) and dynamic error vector magnitude (DEVM). A compact four-way output transformer balun is proposed to achieve efficient power combining, and a built-in 2nd-harmonic short is demonstrated by using a novel multi-layered metallization scheme. A thermally compensating dynamic bias circuit that improves the DEVM and reduces memory effects is designed with an integrated temperature sensor. Different SiGe HBT array layouts, laterally and vertically arranged, of the output stage of the PA are also investigated. With the 802.11ac MCS9 VHT80 test signals, the DEVM of a PA with a laterally arranged output stage is lower than that of its vertical counterpart. This suggests the importance of the layout on the transistor electrothermal transient effect. The PA with the laterally arranged output stage shows a POUT of 22.5/23.6/23.2 dBm (DEVM = -35 dB) with 10.0/12.2/11.2% power-added efficiency (PAE) at 5210/5530/5855 MHz under an 802.11ac MCS9 VHT80 test signal at 50% duty cycle. Good DEVM performance was measured under the test signal with various duty cycles, indicating that the proposed PA is thermally robust. The design supports the 802.11ax MCS11 VHT80 signals with 19.4-dBm POUT, satisfying a DEVM of -40 dB.

15 March 2018 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
IJInchan Ju
Inchan Ju
CCClifford Dy Cheon
Clifford Dy Cheon
JCJohn D. Cressler
John D. Cressler
A compact highly efficient high-power SiGe Ka-band balanced frequency doubler is presented. Using a compact single-footprint four-way transformer input balun, wideband matching, and high fundamental rejection were achieved simultaneously. A cascode topology with very low base impedance termination was utilized for stable operation and high-voltage swing at the output. Two cascode differential pairs form a common-centroid configuration, resulting strong enhancement in output power, power-added efficiency (PAE), fundamental rejection, and robustness to process and supply variation. The proposed Ka-band cascode balanced frequency doubler was implemented in a 0.13-μm SiGe BiCMOS technology. Measured results show 13-dBm output power with 22% peak PAE at 34 GHz for a -1-dBm input power. The 3-dB conversion gain bandwidth is from 25 to 40 GHz, fully covering Ka-band. Peak fundamental suppression is 74.5 dB at 33 GHz, and it is higher than 35 dB over Ka-band. No performance degradation is observed after 24-h RF stress test. To the author's best knowledge, this paper has the highest efficiency, the highest output power/power density, the highest conversion gain without output buffers, and the higher or comparable fundamental rejection among any Si-based frequency doublers. Therefore, this doubler will be a promising solution for efficient and high-power local oscillator generation in 5G wireless phased-array communication system.

3 October 2017 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
IJInchan Ju
Inchan Ju
JCJohn Cressler
John Cressler
A highly efficient sub-Watt X-band inverse class-F SiGe heterojunction bipolar transistor (HBT) cascode power amplifier (PA) is presented. With a multi-harmonic resonance filter and a low loss lumped-element Wilkinson power combiner as an output matching network, the inverse class-F operation is realized successfully and high output power and power added efficiency (PAE) are obtained simultaneously. A cascode configuration with a low base impedance termination and reduced voltage-current waveform overlap extends VCE swing of the upper SiGe HBT in the cascode beyond BVCBO, leading to improvement in output power and PAE. As proof of concept, the proposed PA was implemented in a 0.13-μm SiGe BiCMOS technology platform. Measured results shows 53.4% peak PAE with 26.1 dBm output power at 10 GHz, when operated on a 3.0-V supply. No performance degradation is observed after 24-h continuous mode operation. To the author's best knowledge, this brief has the highest PAE among any Si-based X-band PAs with comparable output power, which demonstrates that the proposed harmonic-tuned Wilkinson power combiner approach is an appropriate solution for efficient PA design at X-band.

9 May 2022 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
IJInchan Ju
Inchan Ju
SLSeokchul Lee
Seokchul Lee
JCJohn Cressler
John Cressler
An efficient, broadband SiGe HBT cascode nonuniform distributed power amplifier (NDPA) is presented for low-cost, fully integrated Si-based phased arrays. Optimum load impedances at each SiGe HBT cascode in a four-stage NDPA core are obtained by scaling the characteristic impedance ( $Z_{0}$ ) of the collector transmission lines (TLs) and tapering the SiGe HBT emitter area simultaneously. A novel compact, lumped-element two-section $\lambda $ /4 output impedance transformer (OIT) is proposed to lower the NDPA load impedance ( $Z_{L}$ ) from 50 to 25 $\Omega $ over more than one decade bandwidth (BW). Each $\lambda $ /4 impedance transformer is realized by four cascaded CLC $\pi $ -networks integrated into a single three-turn symmetric inductor in order to achieve compact size, high passive efficiency, and high LC cutoff frequency ( $f_{c}$ ). The systematic design approach of a lumped-element $\lambda $ /4 impedance transformer with an arbitrary $Z_{0}$ is described in detail. The prototype NDPA was fabricated in 0.13- $\mu \text{m}$ SiGe HBT BiCMOS technology. The proposed SiGe HBT cascode NDPA supports both high linearity (HL) and high gain (HG) modes, each suited to a specific application. The NDPA attains a peak power gain of 10.3/12.5 dB, a saturated output power ( $P_{\mathrm {out}}$ ) of 21.3/21.5 dBm, and a power added efficiency (PAE) of 12.2%/12.5%–21.6%/22.0% for HL/HG modes, with a 3-dB BW from 1.5 to 24.0 GHz. The NDPA delivers 13.0-dBm average $P_{\mathrm {out}}$ with a PAE of 10.0% at 6-Gbit/s data rate 64 QAM modulation.

16 April 2024 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
HLHanjung Lee
Hanjung Lee
IHInsu Han
Insu Han
IJInchan Ju
Inchan Ju
This article presents a compact, highly efficient, and linear Ka-band SiGe HBT cascode power amplifier (PA) for emerging low-earth-orbit (LEO) satellite communication (SATCOM). A novel lumped element coupled line impedance inverting balun (ZIB), realized by two broadside coupled lines in a single inductor footprint, is proposed to save chip area while obtaining comparable performance to its distributed counterpart. The systematic design method of the lumped element coupled line ZIB is described in detail. A compact SiGe HBT cascode, with a shared deep trench (DT) layout and its simple model method, is suggested for the PA output stage design. For the first time, a single-ended to differential hybrid PA topology is adopted at Ka-band to broaden BW and reduce insertion loss (IL) in a compact chip size. A prototype Ka-band SiGe HBT cascode PA is implemented in 0.13 $\mu $ m SiGe HBT BiCMOS. It attains peak output power (P $_{\mathrm{OUT}})$ and peak power-added efficiency (PAE) of 22.6 dBm and 40.3% at 28.0 GHz, respectively, demonstrating the highest PAE among any linear Ka-band SiGe HBT PAs and the largest power density among any Si-based Ka-band PAs. The proposed PA can also operate at elevated ambient temperature of 80 $^{\circ}$ C with negligible degradation in P $_{\mathrm{OUT}}$ and PAE. It delivers linear P $_{\mathrm{OUT}}$ (P $_{\mathrm{AVG}})$ of 15.6/13.1 dBm with average PAE (PAE $_{\mathrm{AVG}})$ of 16.3/10.0% at 2.4/3.2-Gbit/s data rate 64/256 QAM 5G NR FR2 CP modulated signal. This ultracompact Ka-band SiGe HBT PA is suitable for a low-cost, highly integrated transmit beamformer ICs (BFICs) for emerging LEO SATCOM phased array.

7 January 2025 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
HLHanjung Lee
Hanjung Lee
IHInsu Han
Insu Han
IJInchan Ju
Inchan Ju
This article presents a compact, efficient, and linear Q-/V-band silicon-germanium (SiGe) heterojunction bipolar transistor (HBT) cascode power amplifier (PA) for emerging very low-Earth-orbit (VLEO) satellite communication (SATCOM). A novel four-way Wilkinson combiner balun (WCB), realized by two coupled line impedance inverting baluns (ZIBs) and isolation (ISO) resistors ( $R_{\text {ISO}}$ s), is proposed. The design procedure of the proposed four-way WCB, specifically focused on reducing electrical length ( ${\theta }~{\lt }~45{^{\circ }}$ ) and extending bandwidth (BW) of coupled line ZIBs, is revealed in detail and their associated design parameters are subsequently obtained using the so-called graphical extraction method. With this intuitive approach, the four-way WCB is synthesized fast to improve BW, passive efficiency, and signal balance simultaneously, within a compact chip size. Also, the impact of an on-chip ground (GND) parasitic inductance on the PA is studied, where a co-design of layout and schematic is explored to decide an optimal differential SiGe HBT cascode output stage. Fabricated in 0.13- $\mu $ m SiGe HBT BiCMOS, the PA obtains measured peak output power ( $P_{\text {out}}$ ), power added efficiency (PAE), and gain of 24.1 dBm, 35.3%, and 23.0 dB at 43.0 GHz, respectively, with a power density of 1295.6 mW/mm2. The 1-dB $P_{\text {out}}$ BW ranges from 39 to 51 GHz, covering both up- and down-links of VLEO SATCOM. It delivers the linear $P_{\text {out}}$ ( $P_{\text {avg}}$ ) of 17.9/15.5 dBm with an average PAE (PAEavg) of 19.0%/14.5% at 250-/ 400-MHz symbol rate Direct Video Broadcasting-Second Generation Satellite Extension (DVB-S2X 64) amplitude phase shift keying (APSK) signals. To the best of the author’s knowledge, this SiGe PA attains the highest gain/peak PAE/ $P_{\text {avg}}$ /PAEavg/power density at the Q-/V-band, enabling for low-cost, highly integrated VLEO SATCOM TX beamformer ICs (BFICs).