Peng Xu

Peng Xu

Auto-generated profile, based on publicly available information

Peng Xu

State Key Laboratory of Integrated Chips and Systems, Fudan University, Shanghai, China

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 June 2023 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
TWTao Wang
Tao Wang
JLJieyang Li
Jieyang Li
DHDi Hua
Di Hua
LLLiangbo Lei
Liangbo Lei
PCPeng Cao
Peng Cao
ZHZhiliang Hong
Zhiliang Hong
This article presents a fully integrated digital polar transmitter (DPTX) incorporating an efficiency-enhanced digital power amplifier (DPA) and a high-resolution digital-to-time converter (DTC). The proposed single-ended Doherty (SED) PA topology with switched-capacitor (SC) arrays can generate four power efficiency peaks that significantly improve the power-added efficiency (PAE) at the power amplifier (PA)’s power back-offs (PBOs). In addition, this work utilizes a three-segment DTC, built with a delay-locked loop (DLL), to improve the phase resolution and enable real-time process-voltage-temperature (PVT) calibration of the DTC. Fabricated in a 28 nm CMOS technology, the DPTX achieves a peak output power ( $P_{\mathrm{out}})$ of 27.7 dBm and a peak PAE of 33.4% at a 2.1 GHz carrier frequency. The PAEs at 2.5, 6, and 12 dB PBOs are 31.1%, 24.5%, and 18%, respectively. With the 2.1 GHz carrier, the DTC achieves 360 $^{\circ}$ full output phase range, $\pm$ 1.3 $^{\circ}$ differential nonlinearity (DNL), $\pm$ 1.7 $^{\circ}$ integral nonlinearity (INL), and $-$ 133.86 dBc/Hz phase noise at a frequency offset of 1 MHz, while the power dissipation is only 14 mW. When testing the 10 MHz (and 20 MHz) long term evolution (LTE) 64 QAM signals with a 6.2 (5.0) dB peak-to-average power ratio (PAPR), the DPTX achieves an average $P_{\mathrm{out}}$ of 21.5 (22.7) dBm, an average PAE of 23.5% (24.6%), an average system efficiency (SE) of 22.5% (23.8%)–, 30.6 (–27.7) dB error vector magnitude (EVM), and –34.2/–32.6 (–30.1/–29.2) dBc adjacent channel leakage ratio (ACLR). Note that these results have been achieved with only the on-chip digital pre-distortion (DPD) algorithm.

13 October 2023 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
PXPeng Xu
Peng Xu
JKJin Kang
Jin Kang
ZTZhiguo Tong
Zhiguo Tong
PCPeng Cao
Peng Cao
YWYingjie Wang
Yingjie Wang
ZHZhiliang Hong
Zhiliang Hong
Envelope tracking (ET) and average power tracking (APT) have been widely used as supply modulators of power amplifiers (PAs). To meet the new challenges brought by the 5G NR standard, the symbol power tracking (SPT) technique is proposed, which is more efficient than ET and more flexible than APT. For the application of subcarrier spacing (SCS) of 15- $\sim$ 60kHz in the frequency range 1 (FR1), this paper proposed a buck-boost SPT supply modulator with a transition time below 1.17- $\mu $ s for 5G NR PA in the smartphone. The combination of three techniques improves the voltage transition speed. The charge-pump-based switching power modulator increases the output voltage higher than the battery voltage and offers a high voltage source for the auxiliary current paths (ACP). The ACP introduces additional currents to charge/discharge the 1- $\mu $ F output capacitor. The end-point-prediction (EPP) scheme lets the compensator convert directly from one steady state to the next. This supply modulator circuit is designed and fabricated using 0.18- $\mu $ m BCD technology. The output voltage range is 1–5-V. The maximum transition speed can be up to 0.37- $\mu $ s/V and 0.15- $\mu $ s/V for up-tracking and down-tracking, respectively.

28 February 2023 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
PXPeng Xu
Peng Xu
XZXueli Zhang
Xueli Zhang
PCPeng Cao
Peng Cao
TWTingting Wei
Tingting Wei
ZTZhiguo Tong
Zhiguo Tong
ZHZhiliang Hong
Zhiliang Hong
Envelope tracking is an effective way to improve the efficiency of radio frequency power amplifiers (PAs). This paper presents a wideband hybrid envelope tracking supply modulator (ETSM) for 5G New Radio (NR) PAs. To reach a wide envelope tracking bandwidth of 200MHz while maintaining high power efficiency, this work utilized a linear amplifier (LA) with accurate frequency compensation and enhanced driving capability. The proposed low-pass sense and control (LPSC) circuit ensures that the switching power amplifier (SPM) only tracks the low-frequency components of the envelope to reduce the switching power loss. The proposed dual-path duty modulator regulates the voltage across the AC-coupling capacitor. This supply modulator circuit is designed and fabricated using 0.18μm BCD technology. When tracking 200MHz bandwidth envelope signals, the prototype ETSM achieves 78.5% efficiency at the output power of 2.7W when taking a realistic 4Ω//600pF load as the PA model.

2 April 2024 in IEEE Solid-State Circuits Letters
Verified
Journal Article
Closed access
PXPeng Xu
Peng Xu
TWTao Wang
Tao Wang
XZXueli Zhang
Xueli Zhang
PCPeng Cao
Peng Cao
JXJiawei Xu
Jiawei Xu
ZHZhiliang Hong
Zhiliang Hong
This letter analyzes the proposed variable-sawtooth-based PWM controller for the AC-coupled envelope tracking (ET) supply modulator (SM). The ET SM includes a linear amplifier and a switching power modulator (SPM). The SPM maintains the voltage across the AC-coupling capacitor and provides an output current in a power-efficient manner. A 10-MHz constant frequency is employed in the proposed SPM to reduce the interference to the communication system. It utilizes a pulse-width-modulation controller but contains a voltage main loop and a current auxiliary loop, improving the transient response performance at the expense of complicated control loops. This letter analyzes the stability condition and design methodology to determine key parameters. The simulation and measurement have verified these theoretical analyses.