In this study, 5,10,15,20-(4-hydroxyphenyl) porphyrin (THPP) was used as an optical waveguide (OWG) sensing material to detect several harmful acidic gases and volatile organic compounds. With this material, the sensor showed high selectivity and sensitivity to NO 2 . First, a OWG sensor based on THPP was prepared using the spin-coating method. Next, the absorbance changes in the porphyrin film before and after interaction with NO 2 gas were analyzed using an ultraviolet-visible spectrophotometer. A 670 nm detection light source was selected for testing the OWG detection system; the optimum conditions were studied, where the lowest concentration detected by the sensor was 10 ppb. The film thickness (190 nm) was measured using scanning electron microscopy (SEM). Thereafter, the gas-sensing mechanism was further investigated through SEM, IR, and x-ray diffraction. Finally, the influence of ambient humidity on the sensor was analyzed. The results showed that ambient humidity can be neglected. The transducer exhibited uncomplicated fabrication and easy portability, and the detection process of OWG could be conducted at ambient temperature and resist electromagnetic interference.
Herein, a surface-sensitive sensor was reported as an optical waveguide (OWG) gas sensor. The sensor exhibited some advantages, including simple preparation and high sensitivity. Further, it could be operated at room temperature. TiO2 and ZnFe2O4 were employed as sensitive materials to prepare a sensor with a high response to styrene gas. The TiO2–ZnFe2O4 sol was prepared by doping ZnFe2O4 via the preparation of a TiO2 thin film, and the TiO2–ZnFe2O4 sol was fixed at the surface of the tin-doped glass waveguide by the dip-pulling method. Furthermore, the optimum conditions of the sensor were studied, and the sensors that were prepared under optimum conditions were employed to detect different concentrations of styrene gases. The results demonstrated that the sensor exhibited a high response to the determination of styrene and was reusable. Moreover, it could detect styrene across the concentration range from 1,000 ppm to 100 ppb at ambient temperature.