25 September 2022 in Bulletin of Engineering Geology and the Environment
23 May 2023 in Journal of Materials Research and Technology
6 October 2021 in JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT
Any systems can be expressed by and connected with information. For the safety education system, doing so is essentially a process of safety information dissemination and cognition. Therefore, information is the core of the safety education system. At present, the key factors affecting the effectiveness of safety education are safety demand analysis information, the dissemination and cognitive processes of safety information and information feedback. Research on the construction of a framework model for safety education under the guidance of information flow clears and classifies information-related elements of the safety education process. Therefore, it is conducive to the construction of a safety education system to improve its management level and, through the rational use of information technology, to improve the conversion rate of safety information into safety behaviour. Based on a systematic review and comparison of the existing research perspectives on safety education and information-flow-based safety education (IFSE), this paper analyses the reasons why we need a new perspective on safety education. We introduce information flow into the safety education framework model. The fundamental and expanding elements of safety education propagation are examined and deduced based on information theory. Combined with the connotations of safety education and information flow, this paper analyses the implementation steps of IFSE and applies them to the safety education of new employees in metal and nonmetal mines. In the micro-design, virtual reality technology is used to integrate safety education content and information technology. A new perspective on safety education is created; then, the framework model of IFSE, its implementation steps and models of the processing and utilization processes of safety education are constructed. IFSE is a new perspective for realizing safety education in practice, and the framework model of IFSE provides rigorous theoretical knowledge. Of course, to improve IFSE in practice, more scientific and detailed evaluation methods need to be introduced. This paper is helpful for guiding the safety education theory research from “trivializes situated” to “systematic” and for guiding the design, implementation, assessment and optimization of the safety education practice.
15 January 2021 in Advances in Civil Engineering
To study the evolutionary characteristics of mesostructural damage to saturated limestone under different loading and unloading paths, three types of loading and unloading tests involving three different loading rates and initial peak stresses were performed. Nuclear magnetic resonance technology and scanning electron microscopy were used to investigate the evolutionary characteristics of pore water during the loading and unloading of the limestone. The results indicated that, with an increase in the initial peak stress, the rock viscoplasticity gradually decreased, and the variation of pore radius and the reduction of bound water decreased. With an increasing loading rate, the mesostructure evolution law under disturbance‐increasing amplitude (DIA) cycling was opposite to those under increasing amplitude (IA) and repeated‐increasing amplitude (RIA) cycling. With the increasing loading stress level, the porosity decreased and then increased. Under increasing amplitude cycling, a larger initial porosity resulted in higher pore compaction and expansion limits. Reducing the initial peak stress inhibited the pore expansion, whereas it had the opposite effect under RIA and DIA cycling. During loading and unloading, bound water exists in pores of organic matter and mesopores, and free water exists in macropores of intergranular and transgranular fractures. These changes indicate certain laws under different loading and unloading paths. The results of this study indicate that the mesostructure characteristics of rock depend on the loading and unloading paths.
5 August 2020 in Geofluids
In order to simplify the ratio decision process of cemented backfill in underground mines and achieve fine decision of filling ratio, the research on the energy matching between surrounding rock and cemented backfill in underground mines was conducted in this study. Based on the cubic function strength model of cemented backfill, the peak specific energy equation of backfill was improved by inversion analysis of the data of filling ratio experiment, and the functional relationship between the peak specific energy and the filling ratio was obtained by regression analysis. Then, based on the energy balance principle between the deformation energy released by the excavation of the underground rock mass and the peak specific energy of the cemented backfill, considering the physical and mechanical parameters of the surrounding rock of the goaf, including bulk density, elastic modulus, and burial depth, a ratio decision model of cemented backfill is established. The application results suggested that the calculation result of the model is reliable, and it can realize the rapid and accurate decision of the ratio of cement backfill in underground mines.
21 April 2022 in Geofluids
Driven by the commitment of achieving peak carbon dioxide emissions before 2030 and carbon neutrality before 2060, China is promoting the optimization of its energy and industry structures. In the electricity supply industry, a large number of different types of sophisticated large and giant hydropower stations are planned or being constructed in western China. In future decades, hydropower may take the dominant position in Chinas electricity supply. Rock fracturing behavior plays a vital role in geotechnical hazard prevention and geotechnical engineering design. With the construction of hydropower stations, rock mechanics investigation will be of great concern. This study presents a hybrid model that coupled the finite element method and peridynamic theory to simulate the indirect tensile strength of marble. Sensitivity analyses of the loading rate, mesh size, and fracture energy release rate are performed. The numerical results indicate that both the loading rate and mesh size significantly affect the numerical representation of rock properties. After the calibration of the fracture energy release rate, Brazilian tensile strength modeling is successfully conducted, and the numerical results are consistent with the experimental results.