3 February 2021 in IEEE Transactions on Microwave Theory and Techniques
In this study, we investigate the effect of including ridged disk vanes on the operation of a magnetically insulated transmission line oscillator (MILO) in an experiment using a comparison of a ridged MILO (RMILO) with a conventional MILO (CMILO). The only technical difference between the two models is the presence of ridges in the RMILO. The experimental results show that when the voltage is 486 kV and the current is 51 kA, the RMILO's peak microwave power is approximately 2.9 GW with a pulse duration of more than 35 ns and a microwave frequency of approximately 1.48 GHz. In contrast, the CMILO has the highest power microwave with a peak power of 2.1 GW corresponding to a pulse duration of more than 40 ns and a microwave frequency of approximately 1.53 GHz. The RMILO's power efficiency increases to 11.7%, a 25% increase compared to that of the CMILO under the same conditions. The experimental measurements exactly coincide with the simulation results. Thus, including ridged disk vanes produces a superior performance.
16 March 2023 in IEEE Transactions on Electron Devices
In the present study, the frequency tunability of a magnetically insulated transmission line oscillator (MILO) is investigated by simulation in conjunction with an experiment. In the simulation, the tunable MILO reaches a maximum output power of approximately 5.0 GW with an applied voltage of 590 kV and an input power of 29 GW. The corresponding power efficiency is 17.2%, and the frequency is 1.575 GHz. In addition, by adjusting the outer radius of the vane from 77 to 150 mm, the 3-dB tunable frequency of the tunable MILO ranges from 0.85 to 2.12 GHz, and the tuning bandwidth is 85.5%. The experimental results show that when the voltage and current are 405 kV and 42 kA, respectively, the peak microwave power of the tunable MILO is approximately 2.3 GW with a microwave frequency of approximately 1.900 GHz. The difference in the two frequencies at the peak microwave power is significant because of the tuning mechanism. When the outer radius of the vane varies in the range of 76.6–93.0 mm, the 3-dB tunable frequency range is between 1.552 and 2.168 GHz, corresponding to a 3-dB tuning bandwidth of 33.1%. The experimental measurements verify the simulation results.
18 August 2020 in IEEE Transactions on Electron Devices
In this study, we investigate the effect of the inclusion of ridged disk vanes on the operation of a magnetically insulated transmission line oscillator (MILO), using a combination of ``cold'' (without electron beam) and ``hot'' (with electron beam) simulations. Cold simulation shows that the inclusion of ridged-disks in a ridged MILO (RMILO) enhances its slow wave structure's (SWS's) coupling impedance, thus improving its power efficiency. Moreover, since the ridges' effect on frequency is weak, the MILO's inherent tunability is maintained. In hot simulation, the RMILO obtains a 3-dB tunable frequency range of 0.96-2.18 GHz with an applied voltage of 603 kV, in contrast to the 1.04-2.01-GHz range obtained with a conventional MILO (CMILO), owing to the former's improved power efficiency. With this voltage, the device generates the high power microwave (HPM) with a maximum output power of 7.1 GW at a frequency of 1.40 GHz, corresponding to a power efficiency of 22.6%. The maximum power efficiency of 24.5%, corresponding to a 13.5-GW output, was obtained by increasing the applied voltage to 807 kV, an increase of 20.2% compared to the power efficiency obtained with a CMILO in the same condition.
23 October 2025 in IEEE Transactions on Electron Devices
A C-band relativistic magnetron with an improved extraction structure (CRMIS) is presented, and the simulation and experimental results are given in this article. The improved extraction structure helps enhance efficiency and ensure stable operation in the $\pi $ mode. Simulation results demonstrate that under quasi-square wave voltage waveform conditions, the CRMIS achieves a microwave output of 2.81 GW at 4.35 GHz with 61.8% efficiency. If a nonideal experimental voltage waveform is used, the CRMIS maintains stable $\pi $ -mode oscillation, but its simulation efficiency drops to 46.4%. Experimental results indicate stable operation of the CRMIS within voltage (500–600 kV) and magnetic field (0.245–0.260 T) ranges, achieving a maximum output power of 1.70 GW at 4.51 GHz with 34.8% efficiency, and the output mode exhibits pure TEM mode. Repetitive experiments indicate that under 550-kV voltage and 0.250-T magnetic field, pulse shortening occurs after approximately 40 pulses without significant microwave power degradation. After hundreds of pulses, however, noticeable breakdown traces emerge between the sector-shaped segment and the outer wall of the sector waveguide structure, leading to a significant decline in output power.
1 April 2025 in IEEE Electron Device Letters
An improved all-cavity extraction relativistic magnetron (ACE-RM) is proposed and investigated in depth in this letter. To reduce the energy deposition density to avoid anode plasma generation, a hollow beam dump is introduced into the ACE-RM. The axial leakage current is guided into the hollow beam dump and then is dispersed and deposited on its inner surface. Since the deposition area of the electron beam is greatly increased, the energy deposition density is greatly reduced, which effectively avoids anode plasma generation. Simulation and experimental results confirm the success of the improved model. Although there is still a slight mode competition, the working main mode of the ACE-RM is stable. In the experiments, its microwave power reaches 4.03 GW and power efficiency reaches 53.1%. This is a new milestone in RM research.
7 October 2025 in IEEE Access
We propose a high-efficiency X-band relativistic magnetron (RM) with external sector cavities operating in TE011 mode for the first time. A 16-vane anode resonator with eight coupling slots is employed for such a structure, while the outer cavity consists of eight sector cavities. A coaxial waveguide is closely adjacent to these external sector cavities for axial output. By controlling the operating mode of the external sector cavities to be TE011 mode, external sector cavities are tightly coupled with the π-mode of the inner cavity, and the output mode from the coaxial waveguide is TE01. Particle-in-cell (PIC) simulations demonstrate that under a diode voltage of 550 kV and beam current of 4.55 kA, with a 0.28 T axial magnetic field, the device generates 2.03 GW output power at 8.05 GHz with 81.1% efficiency.