Mykhailo Pylypets

Mykhailo Pylypets

Auto-generated profile, based on publicly available information

Mykhailo Pylypets

Lutsk Ukraine

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2025 in Technologia i Automatyzacja Montażu
Verified
Journal Article
Open access
OPOleksandr Povstyanoy
Oleksandr Povstyanoy
LMLyudmila Markina
Lyudmila Markina
VDViktor Denysiuk
Viktor Denysiuk
YLYurii Lapchenko
Yurii Lapchenko
VSViktor Satsyk
Viktor Satsyk
MPMykhailo Pylypets
Mykhailo Pylypets
The article presents the development of an automated smart humanoid robot hand on the Arduino platform using 3D printing, servo drives, and a sensor glove with flexible sensors. An electrical circuit and a software module for reading and processing signals have been developed, which provides real-time reproduction of the operator's finger movements. Modelling, assembly of mechanical and electronic parts, calibration of sensors and actuators have been carried out. Experimental studies have confirmed the accuracy, speed, and stability of the system, which makes it suitable for educational and demonstration robotics applications.

4 December 2025 in Central Ukrainian Scientific Bulletin. Technical Sciences
Verified
Journal Article
Closed access
RRRoman Rohatynskyi
Roman Rohatynskyi
MPMykhailo Pylypets
Mykhailo Pylypets
ITIgor Tkachenko
Igor Tkachenko
MPMariia Pientak
Mariia Pientak
TPTaras Peleshok
Taras Peleshok
PLPalvo Leskiv
Palvo Leskiv
Roman Rohatynskyi, Professor, Doctor of Science, Professor of the Automobile Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0001-8536- 4599, e-mail: rogatynskyi@gmail.com Mykhailo Pylypets, Professor, Doctor of Science, Professor of the Mechanical Engineering Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000- 0002-4286-9324, e-mail: pulupecmi@gmail.com Igor Tkachenko, Associate Professor, PhD (Candidate of Technical Sciences), Associate Professor of the Mechanical Engineering Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0002-3029-4578, e-mail: tkachenkoigor61@gmail.com Mariia Pientak, Senior Lecturer of the Automobiles Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0001-6758-6593, e-mail: mariaradyk03@ukr.net Taras Peleshok, doctoral student of the Automobile Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0009-0006-2136-8340 , e-mail: madbull@meta.ua Palvo Leskiv, PhD Student, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0009-0003-7564-1785, e-mail: far.better2@gmail.com. The article presents models of winding profiles from strips with different height-to-width ratios of the cross-section using a rotating cylindrical mandrel, along with a justification for the technological design of winding methods for screw and tubular profiles. The stress–strain state during winding is analyzed for plane strain and plane stress conditions under pure bending and bending by transverse force. Differences were established between the bending behavior of wide strips, narrow strips bent on edge, and intermediate profiles on a cylindrical mandrel. A generalized expression was derived to calculate the winding moments for profiles of different cross-sections. It was demonstrated that when bending by a transverse force with a short lever arm, significant friction forces on the mandrel resist the compression of the inner layers of the workpiece, resulting in tensile stresses; thus, bending occurs due to a moment combined with longitudinal forces. Consequently, the total winding moment is higher than under pure bending, leading to greater energy consumption. At the same time, the radial load on the mandrel increases significantly, which negatively affects the durability of the technological equipment. However, bending narrow strips on edge by a transverse force with a short lever arm improves the stability of the winding process and enables broader application of this technological method for the production of twisted profiles. This, in turn, expands the range of wound profiles, in particular screw spirals used in screw conveyors, mixers, and other technological equipment.

29 November 2025 in СУЧАСНІ ТЕХНОЛОГІЇ В МАШИНОБУДУВАННІ ТА ТРАНСПОРТІ
Verified
Journal Article
Closed access
РПРоман Полінкевич
Роман Полінкевич
НЗНаталія Зубовецька
Наталія Зубовецька
РРРостислав Редько
Ростислав Редько
ТЧТарас Четвержук
Тарас Четвержук
ОЗОльга Залета
Ольга Залета
МПМихайло Пилипець
Михайло Пилипець
The paper addresses an axisymmetric thermophysical problem occurring during deep-hole drilling, based on a proposed mathematical model for temperature calculation using the heat source method and the principles of spatial-temporal correspondence and local influence. The dependencies of the thermal process were determined, taking into account the mutual positioning of the cutting tool and the part, the material of the workpiece, the presence of cooling with cutting fluid, cutting conditions, chip removal, and the duration of the drilling operation itself. This is particularly important for deep drilling, where the heat source is continuously displaced. It was established that the calculation of the temperature field in the workpiece depends on the action of a ring-shaped heat source with a uniform heat release intensity distribution. Theoretical analysis showed that the maximum temperature should not exceed 300 °C (without lubricating and cooling fluid) and 180 °C (with lubricating and cooling fluid), respectively. Standard chromel-alumel thermocouples (temperature range −100 °C to +1000 °C) were used for temperature measurement. Deep-hole drilling experiments were performed on parts made of Steel 45 (analogous to C45E and Ck45 according to the EU standard EN 10083-2) with diameters of 10 mm and 20 mm, using special deep-drilling tools. The machining was carried out on a universal lathe model 16K20, modified for deep drilling. The temperature in the tool-workpiece contact zone and the temperature distribution within the workpiece (temperature gradient) were calculated. The adequacy of the proposed mathematical model was confirmed, as the calculated temperature values corresponded well with the experimental data. Keywords: heat source, deep drilling, thermal conductivity, heat source method, principle of spatial-temporal correspondence.

1 January 2020 in Scientific journal of the Ternopil national technical university
Verified
Journal Article
Closed access
ISIgor Stadnik
Igor Stadnik
OPOksana Pylypets
Oksana Pylypets
MPMykhailo Pylypets
Mykhailo Pylypets
VPVolodymyr Poddubny
Volodymyr Poddubny
OKOlena Kolomiiets
Olena Kolomiiets
Baking industry plays one of the most important roles in the production of vital food products. The quality of the bakery products can be improved through the improvement of quality in technological process of dough kneading. A technical solution for providing greater contact with the environment, reducing the duration of the process, and, accordingly, increase productivity due to the developed design of a new machine with a cylindrical working body was proposed. The ways of regulating the course of the technological process in the working chamber of a new kneading machine are considered. They are based on the change of parameters: duration of kneading, temperature, humidity, rotation frequency of the working body. A method of calculating the required power based on the process of kneading the dough is proposed. It allowed obtaining a theoretical calculation of power consumption at unknown values of the friction forces action on the kneading drum, but the known frequency of its rotation with the corresponding design parameters and factors of influence. In addition, it makes possibility to determine the effort main components that affect to the power increase of the working body drive.

4 December 2025 in Central Ukrainian Scientific Bulletin. Technical Sciences
Verified
Journal Article
Closed access
IНIvan Нevko
Ivan Нevko
RRRoman Rohatynskyi
Roman Rohatynskyi
OLOleg Lyashuk
Oleg Lyashuk
MPMykhailo Pylypets
Mykhailo Pylypets
ITIgor Tkachenko
Igor Tkachenko
RKRoman Komar
Roman Komar
Ivan Hevko, Professor, Doctor of Science, Professor of the Automobile Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0001-5170-0857, e-mail: gevkoivan1@ukr.net Roman Rohatynskyi, Professor, Doctor of Science, Professor of the Automobile Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0001-8536- 4599, e-mail: rogatynskyi@gmail.com Oleg Lyashuk, Professor, Doctor of Science, Professor of the Automobile Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0003-4881-8568, e-mail: oleglashuk@ukr.net Mykhailo Pylypets, Professor, Doctor of Science, Professor of the Mechanical Engineering Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000- 0002-4286-9324, e-mail: pulupecmi@gmail.com Igor Tkachenko, Associate Professor, PhD (Candidate of Technical Sciences), Associate Professor of the Mechanical Engineering Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0002-3029-4578, e-mail: tkachenkoigor61@gmail.com Kostiantyn Buravchenko, Associate Professor, PhD (Candidate of Technical Sciences), Associate Professor of the Mechanical Engineering Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0001-7965-4784, e-mail: rkomar@ukr.net The technological design of individual methods of winding broadband helical spirals is characterized by a number of design, technological and production problems that require systematic understanding and effective solutions in each individual case. Solutions related to solving problems in the process of manufacturing broadband helical coils include finding possible solutions to reduce energy consumption, reducing the number of operations and reducing their duration, finding original methods of their manufacture, and calculating and selecting the most rational ones, minimizing tooling costs, effective selection of materials depending on the design requirements and operating conditions. Also, an important factor in the manufacture of broadband helical spirals, especially in single and small-scale production, is ensuring the necessary accuracy of the parameters of their geometric surfaces, since these surfaces have a rather complex spatial shape, and this requires the use of specialized high-precision equipment and tools. Another important problem in the manufacture of broadband helical spirals is ensuring their appropriate mechanical properties, such as wear resistance, strength, fatigue endurance. This sometimes requires the use of additional technological operations in the technological process, such as surface hardening of the outer contour of the spiral, heat treatment of the spiral, etc. Therefore, obtaining broadband helical spirals requires technological design of effective methods of their manufacture, which can ensure the production of these spirals with the required characteristics at minimal time, energy and other costs. The research is devoted to the technological design of methods for winding broadband helical spirals with a rotating sleeve. Broadband helical spirals are used in many technical systems to perform various technological operations. Classical methods of winding helical spirals involve forming them by winding the strip onto various types of frames by pressing it with forming rollers. However, for the production of wide-band helical spirals, methods of obtaining them using a rotating sleeve are more effective. These methods involve the forming process with the pressing of the workpiece along the outer contour with the clamping of the side surfaces. In this case, the inner surface of the screw workpiece, as a rule, is not involved in the forming process and does not touch the mandrel, forming rollers or rotating sleeve. This allows for a significant height of the winding tape and the production of wide-band helical spirals. Such methods are implemented using a rotating sleeve and are of two types: without calibration at the winding stage and with calibration at the winding stage. These methods of winding wide-band helical coils using a rotating sleeve can be implemented without or with strip pre-preparation. This preparation involves performing additional operations before winding, such as cutting out or cutting triangular or trapezoidal segments on the strip blank. Accordingly, when providing such variants of the method of obtaining broadband helical spirals, their height will increase significantly compared to classical analogues. For both types of substantiated methods of winding broadband helical spirals with a rotating sleeve, the basic design and technological parameters of their manufacturing process are determined and presented. Also, considerable attention is paid in the work to the analysis of structural materials and tools used in the manufacture of broadband helical spirals.