6 September 2018 in Scientific Reports
Perpendicular magnetic materials with low damping constant and high thermal stability have great potential for realizing high-density, non-volatile, and low-power consumption spintronic devices, which can sustain operation reliability for high processing temperatures. In this work, we study the Gilbert damping constant (α) of perpendicularly magnetized W/CoFeB/MgO films with a high perpendicular magnetic anisotropy (PMA) and superb thermal stability. The α of these PMA films annealed at different temperatures (Tann) is determined via an all-optical Time-Resolved Magneto-Optical Kerr Effect method. We find that α of these W/CoFeB/MgO PMA films decreases with increasing Tann, reaches a minimum of α = 0.015 at Tann = 350 °C, and then increases to 0.020 after post-annealing at 400 °C. The minimum α observed at 350 °C is rationalized by two competing effects as Tann becomes higher: the enhanced crystallization of CoFeB and dead-layer growth occurring at the two interfaces of the CoFeB layer. We further demonstrate that α of the 400 °C-annealed W/CoFeB/MgO film is comparable to that of a reference Ta/CoFeB/MgO PMA film annealed at 300 °C, justifying the enhanced thermal stability of the W-seeded CoFeB films.
18 September 2020 in Science Advances
It is desirable to experimentally demonstrate an extremely high resonant frequency, assisted by strain-spin coupling, in technologically important perpendicular magnetic materials for device applications. Here, we directly observe the coupling of magnons and phonons in both time and frequency domains upon femtosecond laser excitation. This strain-spin coupling leads to a magnetoacoustic resonance in perpendicular magnetic [Co/Pd]n multilayers, reaching frequencies in the extremely high frequency (EHF) band, e.g., 60 GHz. We propose a theoretical model to explain the physical mechanism underlying the strain-spin interaction. Our model explains the amplitude increase of the magnetoacoustic resonance state with time and quantitatively predicts the composition of the combined strain-spin state near the resonance. We also detail its precise dependence on the magnetostriction. The results of this work offer a potential pathway to manipulating both the magnitude and timing of EHF and strongly coupled magnon-phonon excitations.
17 December 2020 in ACS Applied Electronic Materials
24 August 2020 in Applied Physics Letters
Bulk perpendicular magnetic anisotropy materials are proposed to be a promising candidate for next-generation ultrahigh density and ultralow energy-consumption spintronic devices. In this work, we experimentally investigate the structure, thermal stability, and magnetic properties of FePd thin films seeded by an Ru layer. An fcc-phase Ru layer induces the highly-ordered L10-phase FePd thin films with perpendicular magnetic anisotropy (Ku ∼10.1 Merg/cm3). The thermal stability of FePd samples is then studied through the annealing process. It is found that a Ku ∼6.8 Merg/cm3 can be obtained with an annealing temperature of 500 °C. In addition, the Gilbert damping constant α, an important parameter for switching current density, is determined as a function of the testing temperature. We observe that α increases from 0.006 to 0.009 for the as-deposited FePd sample and from 0.006 to 0.012 for the 400 °C-annealed FePd sample as the testing temperature changes from 25 °C to 150 °C. These results suggest that Ru-seeded FePd provides great potential in scaling perpendicular magnetic tunnel junctions below 10 nm for applications in ultralow energy-consumption spintronic devices.
15 October 2018 in Applied Physics Letters
Magnetic storage and magnetic memory have recently shifted towards the use of magnetic thin films with large perpendicular magnetic anisotropy (PMA) to simultaneously satisfy the requirements in storage density and thermal stability. Understanding the magnetic switching process and its dependence on the Gilbert damping (α) of materials with large PMA is crucial for developing low-power consumption, fast-switching, and high-thermal stability devices. The need to quantify α of materials with large PMA has resulted in the development of the all-optical ultrafast Time-Resolved Magneto-optical Kerr Effect (TR-MOKE) technique. While TR-MOKE has demonstrated its capability of capturing magnetization dynamics of materials with large PMA, a quantitative analysis regarding the operational optimization of this emerging technique is still lacking. In this paper, we discuss the dependence of the TR-MOKE signal on the magnitude and angle of the applied field, by utilizing a numerical algorithm based on the Landau-Lifshitz-Gilbert equation. The optimized operational conditions that produce the largest TR-MOKE signals are predicted. As an experimental verification, we conduct TR-MOKE measurements on a representative sample of a tungsten-seeded CoFeB PMA thin film to show the excellent agreement of the model prediction with measurements. Our analysis results in a better understanding of the external field influence on the magnetization precession processes. The results of this work can also provide guidance on selecting operational conditions of the TR-MOKE technique to achieve optimal signal-to-noise ratios and thus more accurate measurements of magnetization dynamics.
17 September 2018 in Scientific Reports
With the advent of new nanomanufacturing techniques has come the rise of the field of nanophotonics and an increased need to determine optical properties of novel structures. Commercial software packages are able to estimate the behavior, but require large resources and heavy computational time. By combining coordinate transforms and Effective Medium Theory (EMT), an effective relative permittivity tensor is defined and further exploited to calculate the polarization-coupled Fresnel coefficients through Maxwell’s equations. A uniaxial simplification is made to show the case of tilted nanorod arrays. To demonstrate the flexibility of this system, the interfacial reflectance has been calculated for both s- and p-polarizations as well as the coupled case with the volume filling fractions of f = 0.10 and 0.30 for silver (Ag) and titanium (Ti) nanorods, and a scenario of a Ag nanorod array with polymethyl methacrylate (PMMA) as the surrounding medium. The exact results computed by the finite-difference time-domain method justify the validity of EMT with polarization coupling taken into account. The effects of incidence angle and azimuthal angle on reflectance are also discussed. The relatively simple nature of this approach allows for fast estimations of the optical properties of various nanostructures.