In this article, a simple prototype and control system of a lower limb exoskeleton driven by stepper motors was proposed. To study kinematic parameters of the device, a general, three-dimensional simulation model of the exoskeleton was developed. Moreover, a gait pattern was modeled for hip, knee, and ankle joints. It represents sagittal plane angular positions of joints during normal gait and consists of three piecewise-defined sine-square-based functions. It is based on the experimental gait data recorded with an optoelectronic motion capture system for a healthy subject walking on a treadmill. Although the developed pattern is intended to be implemented in a control system of a lower limb exoskeleton for gait rehabilitation, it can be used to control bipedal robots as well. Last but not least, the control approach was tested with the exoskeleton prototype.
This study is focused on the application of 3D-printed elements and conventional elements to create a prototype of a custom-made exoskeleton for lower limb rehabilitation. The 3D-printed elements were produced by using Fused Deposition Modeling technology and acrylonitrile butadiene styrene (ABS) material. The scope of this work involved the design and construction of an exoskeleton, experimental testing of the ABS material and numerical research by using the finite element method. On the basis of the obtained results, it was possible to deduce whether the load-bearing 3D-printed elements can be used in the proposed mechanical construction. The work contains full data of the material models used in FEM modeling, taking into account the orthotropic properties of the ABS material. Various types of finite elements were used in the presented FE models. The work is a comprehensive combination of material testing issues with the possibility of implementing the obtained results in numerical strength models of machine parts.