25 May 2016 in Optics Express
We have theoretically and experimentally investigated the dual-peak feature of tilted fiber gratings with excessively tilted structure (named as Ex-TFGs). We have explained the dual-peak feature by solving eigenvalue equations for TM0m and TE0m of a circular waveguide, in which the TE (transverse electric) and TM (transverse magnetic) core modes are coupled into TE and TM cladding modes, respectively. Meanwhile, in the experiment, we have verified that one of the dual peaks at the shorter wavelength is due to the TM mode coupling whereas the other one at the longer wavelength arises from TE mode coupling when a linearly polarized light launched into the Ex-TFG. We have also investigated the peak separation of TE and TM cladding mode for different surrounding medium refractive indexes (SRI), revealed that the dual peaks separation is decreasing as increasing of SRI, which agrees very well with the theoretical analysis results.
24 November 2017 in Journal of Lightwave Technology
A high-sensitivity curvature sensing configuration is implemented by using a fiber Mach-Zehnder interferometer (MZI) with D-shaped fiber Bragg grating (FBG). A segment of D-shaped fiber is fusion spliced into a single mode fiber at both sides, and then a short FBG is inscribed in the D-shaped fiber. The fiber device yields a significant spectrum sensitivity as high as 87.7 nm/m$^-1$ to the ultra-low curvature range from 0 to 0.3 m$^-1$, and can distinguish the orientation of curvature experienced by the fiber as the attenuation dip producing either a blue or red wavelength shift, by virtue of the asymmetry of D-shaped fiber cladding. In addition, by tracking both resonant wavelengths of the MZI and embedded FBG, the temperature and curvature can be measured simultaneously.
1 June 2019 in Biosensors and Bioelectronics
We present a plasmonic biosensor capable of detecting the presence of bisphenol A in ultra-low concentrations, yielding a wavelength shift of 0.15 ± 0.01 nm in response to a solution of 1 fM concentration with limit of detection of 330 ± 70 aM The biosensing device consists of an array of gold nano-antennae with a total length of 2.3 cm that generate coupled localised surface plasmons (cLSPs) and is covalently modified with an aptamer specific for bisphenol A recognition. The array of nano-antennae is fabricated on a lapped section of standard telecommunication optical fibre, allowing for potential multiplexing and its use in remote sensing applications. These results have been achieved without the use of enhancement techniques and therefore the approach allows the direct detection of bisphenol A, a low molecular weight (228 Da) target usually detectable only by indirect detection strategies. Its detection at such levels is a significant step forward in measuring small molecules at ultra-low concentrations. Furthermore, this new sensing platform paves the way for the development of portable systems for in-situ agricultural measurements capable of retrieving data on a substance of very high concern at ultra-low concentrations.
1 January 2018 in Sensors and Actuators A: Physical
9 July 2024 in IEEE Sensors Journal
In this paper, a fiber specklegram sensor is formed from reflective mode rotation in few-mode fiber (FMF) with tilted fiber Bragg gratings (TFBG). The FMF-TFBG with different tilt angles have been fabricated, and could realize the high-efficient reflective mode conversion from fundamental mode to high-order core modes (LP 11 , LP 21 , LP 02 , LP 31 , and LP 12 modes) simultaneously when the tilt angle is 1.6°. With the twist induced in FMF-TFBG, the recorded LP 11 , LP 21 and LP 31 mode specklegram rotated with fiber twisting. The specklegrams rotation angle are detected using speeded-up robust feature algorithm combined with Canny edge detection algorithm to improve the accuracy. When fiber twist angle changes from −300° to 300°, the specklegram rotation angle of LP 11 , LP 21 and LP 31 mode is linearly related to fiber twist angle, with linearity of 0.515, 0.544 and 0.528, respectively. Therefore, the proposed mode rotation from FMF-TFBG with advantages of low cost, high accuracy and excellent performances, could give rise a new generation of fiber specklegram sensor.