29 May 2019 in E3S Web of Conferences
Three-dimensional printing is an innovative digital technology and is one of the most significant achievements in the industrial and technological development of modernity. Digital 3D technologies have reached a colossal level of development over a period of about half a century since their invention. Using 3D printing in the construction of low-rise buildings, it becomes possible to implement almost any ideas and achieve the best architectural expressiveness of objects. The aim of this work is to create cement-based compounds that can be used in additive construction methods. A review of the scientific literature on this topic was carried out, the main components of the mixture were identified, and a series of field experiments were conducted. According to the results of the work, the optimal composition for 3D construction printing was determined.
25 September 2024 in Advanced Engineering Research (Rostov-on-Don)
Introduction. When studying composite materials for construction purposes, it is needed to consider the mechanisms of formation of the structure and properties of modern concretes in the process of strength development. In studies of modern composite materials based on cement binder, there is no information about the development of structural defects and destruction of the material at the initial stages of strength development. This information can be obtained using X-ray computed tomography, a promising method of nondestructive testing of the state of the material. Therefore, the objective of this work was to study the formation and propagation of cracks in samples of fine-grained concrete with different fractional composition of sand due to natural processes of cement shrinkage, as well as the mechanics of destruction of samples of modified fine-grained concrete when applying a compressive load at the early stages of strength development. Materials and Methods. The study used fine-grained concrete mixtures of three compositions with different sand gradation. The tomography samples were made by placing fresh mixtures in polymer cylindrical containers. Tomography of the samples immediately after manufacture, as well as after 8 and 51 days, was performed in a YXLON Cheetah microfocus X-ray machine. The composition with two-fraction sand was modified by mechanical activation of the components, 20×20×20 mm cube samples were made. Further, compression tests were performed at the Instron installation after 3 and 7.5 hours, and then — tomography of the destroyed samples.Results. It was established that the destruction of contact zones depended on the ratio of the size of the fractions. In the presence of a bulk of coarse sand grains in concrete, the destruction of contact zones was more pronounced and had a main mode. When using fine or polyfraction sand, contact zones were destroyed locally and had a visually smaller area. The images of the destroyed modified sample, tested 3 hours after manufacturing, showed clear cracks and indents on the edges, which indicated the elastic-plastic nature of the destruction. In 7.5 hours, the edges of the sample upon destruction were covered with a network of small cracks; inside the sample there were also numerous cracks and microcracks, which indicated brittle fracture. Based on the obtained images of the deformed structure of modified concrete, the mechanism of transition from elastic-plastic destruction of the material to brittle one was clearly visible.Discussion and Conclusion. The studied dependences of the influence of the size of fine aggregate on the mechanisms of formation and propagation of structural defects contribute to the theory of the processes of destruction of fine-grained concretes. The results obtained prove the prospects of using X-ray computed tomography as a method of nondestructive testing of the internal structure of fine-grained concrete, including at the early stages of strength development.
14 December 2018 in MATEC Web of Conferences
The possibility of complex experimental study of the structure and properties of modern multicomponent concretes combining the influence of mechanical activation of the initial powder components of building mixtures, the rheology of concrete solutions, the structure of the concrete mixture, the distribution of various components and pores, the nature of damage and destruction at various stages of concrete strength testing is considered. The classical set of experimental methods for studying the rheological characteristics and strength of concretes at various setting stages is supplemented by studies of the concrete structure using X-ray computed tomography. The developing approach allows to solve the fundamental problems of building material science of concrete.
1 November 2018 in Physical Mesomechanics
A computer simulation approach to sintering of low-temperature ceramics has been developed within the framework of the micromechanics of heterogeneous media. It is taken into account that the...
7 June 2019 in IOP Conference Series: Materials Science and Engineering
Additive technologies meet the requirements of the modern technological stage, which applies to all areas industrial activities. Construction using additive technologies is actively developing and this technology has been introduced into production. All this makes 3D concrete printing a relevant and promising direction for the modernization of the construction industry. Concrete mixtures with certain characteristics are used as the "ink" for the construction 3D-printers. In this paper, we investigate the rheological properties of mortars for construction. We also determined the effectiveness of the mechanical activation of the initial components of the mixture, evaluated its effect on the rheological properties and the setting time of the mortar. The optimal values of the dynamic shear stress for the compositions for construction 3D printing are calculated.