Peter Burik

Peter Burik

Auto-generated profile, based on publicly available information

Peter Burik

ZP Research and Development Centre, Ltd., Železiarne Podbrezová, a. s., Kolkáreň 35, 976 81 Podbrezová, Slovakia

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 December 2018 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
LPL’ Parilák
L’ Parilák
PBP Burik
P Burik
PBP Bella
P Bella
MMM Mojžiš
M Mojžiš
PKPavel Kejzlar
Pavel Kejzlar
Cold drawing of steel tubes is the manufacturing process characterized by anisotropic material flow during drawing. In this paper, the micro structural of the E235 steel tube after recrystallization annealing and cold drawing were characterized by optical microscopy and EBSD (Electron BackScatter Diffraction) analysis performed on a scanning electron microscope. The input feedstock after recrystallization annealing with dimensions of ø 25.0 mm × 1.5 mm (O.D × W.T.) was cold drawn in two drawing passes with fixed plug to the final dimensions of ø 18.0 mm × 0.9 mm (O.D × W.T.). The development of crystallographic texture (both qualitative and quantitative) was analysed on a longitudinal section of the tube. The stress-strain state in the tube material during drawing was calculated by FEM (Final Element Method) software and the development of the texture depending on the stress-strain state in three different directions using cylindrical coordinates with respect to the drawing direction was evaluated. We have investigated the ratio of individual crystallographic planes depending on stress state during drawn tube. The main objective was to define the development of crystallographic grain orientation from stress-strain state during cold drawn tube.

17 May 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
MTMatúš Turis
Matúš Turis
OIOľga Ivánková
Oľga Ivánková
PBPeter Burik
Peter Burik
MDMilan Držík
Milan Držík
An experimental optical method has been developed for the measurement of opening and sliding notch face movements. The light passing through a thin slit is monitored by a photodiode detector. Two parts of the slit are fixed independently on the notch faces of the simulated crack. Dynamic variations of the notch face movements are recorded as an electric signal by an oscilloscope. The sensitivity of such displacement measurement is comparable with the wavelength of light. Dynamic mixed-mode stress intensity factors under shock loading were evaluated from the data obtained and subsequently compared with a numerical simulation by ANSYS software. As it was approved, the technique has shown sufficient sensitivity, good linearity, and measurement reliability. Due to its non-destructive nature and overall robustness, the arrangement is applicable even for structural component condition determination taking into consideration potentially unknown boundary conditions and the non-linear character of mechanical parameters.