Since the seminal works on thermoreversible covalent networks followed by the discovery of vitrimers by L. Leibler and co-workers in 2011, numerous chemistries and strategies have flourished to design covalent adaptable networks (CANs) thus opening a novel research field. Using reversible covalent bonds that have been known for decades in molecular chemistry, CANs combine both the rheological characteristics of thermosets (chemically cross-linked networks, insoluble and infusible) and those of thermoplastics (entangled polymer chains able to be dissolved and to flow above their glass transition temperature). The aim of this tutorial review is to provide polymer chemists with guidelines to precisely and properly characterize CANs. Depending on the nature of the exchange mechanism (dissociative, associative, or a combination of both), on the kinetics of exchange, and on the cross-link density, characteristic relaxation times can vary from less than a second to a few hours. The time scale and distribution of relaxation times influence the rheological experiments and models that should be used. The present didactic review provides, from the rich recent literature, a guideline for adequate material characterizations and rheological measurements (and theoretical models applicable) that have been used to study CAN viscoelastic and thermomechanical properties.
Melamine‐based resins are benchmark materials in the field of laminates and composites, and this beyond the world‐famous Formica® brand, but these thermosets are not reprocessable and hardly degradable. In relation with the growing field of covalent adaptable networks (CANs) as reprocessable alternatives to thermosets, this study describes a melamine‐based CAN containing N,O‐acetal exchangeable functions, obtained via a one‐pot and solvent‐free microwave‐assisted process. This material shows good thermo‐mechanical properties (Tg = 90 °C, E’Young up to 1 GPa), a high hydrolytic stability at room temperature (no degradation at pH 1, 7, and 14) but an on‐demand degradability (hydrolysis in HCl 1 m at 100 °C). Moreover, this melamine‐based CAN exhibits short stress‐relaxation times (τ = 30 s at 210 °C) and only very low creep (0.6% at 150 °C after 1 h). This CAN is also easily reprocessable (1.5 h, 170 °C, 10 bars), and no alterations of its properties are observed after 3 reprocessing cycles.
A novel covalent adaptable network based on highly dynamic N , O -acetal exchangeable functions is described: 92% C biobased, mechanically reprocessable and fully chemically recyclable.