13 February 2023 in IEEE Journal of Emerging and Selected Topics in Industrial Electronics
The high penetration of distributed energy resources, based on power electronics, is giving rise to stability issues in the electrical network, as initially those plants were not required to provide either voltage or frequency support. Due to this, TSOs and DSOs have set new requirements for them to provide grid support functionalities. This paper presents a grid forming control strategy for power converters which is based on a virtual admittance loop. By means of this strategy it is possible to use a conventional current control based inverter, just adding this outer loop. By doing so, the converter is not only able to perform current control, but also frequency and voltage support functionalities. In this work, the proposed control is described and analyzed, checking as well its stability boundaries. After this analysis, the results obtained in a hardware-in-the-loop platform, where faulty scenarios, islanding or black start conditions, will be shown. Finally, the results obtained in an experimental true scale workbench will show its effectiveness for providing such services.
12 June 2023 in IEEE Transactions on Industry Applications
The high penetration of distributed energy sources is changing the paradigm of electrical networks control and management. Nowadays, power conversion systems associated to green energy plants are not only required to deliver power according to an MPPT algorithm, but should also participate in the regulation and operation of the power system, in the case of large scale systems, or provide advanced features to end users in the case of prosumers. This work proposes the use of an active transformer, incorporating series voltage regulation and current shunt regulation, through two converters in back-to-back configuration, which is able to provide all power quality services as well as resilience to end-users. This topology is advantageous in case of prosumers connected to weak and faulty grids. Moreover, the proposed active transformer also includes a battery so that island operation is offered as a service. Throughout the paper, the stability analyses and the implementation of an active transformer are presented, with special emphasis on the control of the series converter. The proposed topology is validated through real time simulations and an experimental prototype which includes a 300 kWh energy storage installation.