Zhuili Huang

Zhuili Huang

Auto-generated profile, based on publicly available information

Zhuili Huang

The Hong Kong Polytechnic University

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 December 2021 in Optics Express
Verified
Journal Article
Closed access
HLHuaijian LUO
Huaijian LUO
JLJianing Lu
Jianing Lu
ZHZhuili Huang
Zhuili Huang
Changyuan YUChangyuan YU
Changyuan YU
CLChao Lu
Chao Lu
To increase the transmission capacity, ultra-wideband wavelength-division multiplexing (UWB WDM) has been exploited to enlarge the spectral range. However, inter-channel stimulated Raman scattering (ISRS) results in power transition from high-frequency channels to low-frequency channels in wideband scenarios, which degrades the Q-factor of signals. Hence, we modify the optimization method of power control by applying the simulated annealing (SA) algorithm to search for the optimal power slopes and offsets of three bands to construct an optimum distribution of launch powers over channels. High transmission capacity can be reached by carrying 384 channels (96+96+192) in the C+L+S band with the consideration of dynamic Raman gain and channel-dependent parameters. We show that compared to using brute-force searching (BFS), a comparable and even higher transmission capacity can be achieved by the SA algorithm. Meanwhile, the searching speed of the SA algorithm is much faster. Also, different optimizing strategies can be selected to balance the trade-off between capacity and spectral flatness. This method can be used for designing arbitrary optical fiber UWB WDM systems before practical testing.

1 May 2018 in IEEE Photonics Journal
Verified
Journal Article
Open access
YTYe Tian
Ye Tian
JQJifang Qiu
Jifang Qiu
MYMingbin Yu
Mingbin Yu
ZHZhuili Huang
Zhuili Huang
YQYingying Qiao
Yingying Qiao
Jian WuJian Wu
Jian Wu
In this paper, we propose and fabricated a novel scheme of SOI-based 1$\times$3 coupler with variable splitting ratio. The coupler consists of two cascaded MMI with different sizes, and a wide range of splitting ratios from 1:0.1:1 to 1:18:1 can be achieved by modifying the size of the first-step MMI. Using the structure of cascaded step-size MMI, this kind of device has a compact footprint of below 15 μm$\times$15 μm and simple fabrication process. Meanwhile, the simulation analyses prove that the proposed couplers have a large operation bandwidth above 60 nm and be robust to the fabrication errors. Couplers with several splitting ratios were fabricated and well measured. Based on the measurement results, the splitting ratios of fabricated couplers from 1:0.67:1 to 1:18:1 can be achieved, and stable performance with the transmission efficiencies above 80% can be maintained over 50 nm wavelength range, which is the largest operation bandwidth to the best of our knowledge.

16 May 2023 in Journal of Optical Communications and Networking
Verified
Journal Article
Closed access
ZHZhuili Huang
Zhuili Huang
LDLiang Dou
Liang Dou
JCJingchi Cheng
Jingchi Cheng
CXChongjin Xie
Chongjin Xie
CLChao Lu
Chao Lu
Alan Pak Tao LauAlan Pak Tao Lau
Alan Pak Tao Lau

11 February 2022 in Optics Express
Verified
Journal Article
Closed access
ZHZhuili Huang
Zhuili Huang
YTYe Tian
Ye Tian
YLYufei Liu
Yufei Liu
HLHuaijian LUO
Huaijian LUO
XLXiaojing Long
Xiaojing Long
Changyuan YUChangyuan YU
Changyuan YU
A novel optical performance monitoring (OPM) method based on Fourier transform spectrum analysis (FTSA) is designed for optical signal-to-noise ratio (OSNR) monitoring, modulation format and baud rate recognition in the presence of fiber nonlinearities. The interference intensities, which reflect spectral features of signals, are obtained by exploiting the FTSA consisting of two-stage Mach-Zehnder interferometer (MZI) arrays. Then, the mapping between the OPM parameters and modulated interference intensity (MII) is characterized using neural networks without prior knowledge of the configuration of the communication network. Results show that optical performance parameters are monitored simultaneously. Meanwhile, the accuracy of modulation format and baud rate recognition is 94.8% and most (over 86%) OSNR monitoring errors are less than ±1 dB under complex transmission conditions in presence of frequency offset and delay jitter. Besides, the FTSA can be fabricated on a silicon on insulator (SOI) platform with a large fabrication tolerance, and it has broad working bandwidth to support the full optical communication band. Therefore, the proposed OPM method is capable of integration and miniaturization, which can be ubiquitously applied in network intermediate nodes to support the construction of smart optical networks.