28 November 2017 in IEEE Transactions on Plasma Science
This paper describes a new design of a relativistic Cherenkov oscillator with strong modulation of the e-beam current at the input of two-sectioned slow-wave structure, as well as numerical and experimental results on generation of few gigawatt-level X -band pulses with pulse duration of up to 35 ns. Due to special phase shift between two sections and electrodynamic coupling between E₀₁ surface wave and E₀₂ volume mode, the first one is locked at the upper boundary of the passband and the second one gains more transparency. An electron beam can interact simultaneously with two waves with higher power conversion efficiencies, which in simulations amount up to 47% and 30% for high ( ~4 T) and low ( ~1 T) guiding magnetic fields, correspondingly. The tests of the geometry optimized in simulations were performed on the base of SINUS-7 high-current electron accelerator in the diode voltage range of 400-850 kV and current from 7 to 16 kA. The repeated and full-pulsewidth generation of about 1.5-GW microwave power is achieved only in the low magnetic field. The pulse shortening and the mode competition took place in the strong magnetic field. The results are considered as preliminary for creation of the efficient relativistic millimeter-wave oscillators at magnetic fields below the cyclotron resonance.
5 April 2021 in IEEE Electron Device Letters
This paper describes a recent activity in the development of a high-power microwave source based on a modified relativistic backward wave oscillator that is driven by an advanced version of a SINUS-family accelerator using a double-width pulse-forming line insulated with a modern synthetic oil. The relatively compact source of microwave pulses (0.6 GW, 20 ns, 9.4 GHz) can operate at a 100 pps repetition rate in a batch mode with batches of duration up to 15 s. The long-term stability of the oscillator performances during 106 pulses was achieved due to the improved conditions for explosive emission of the graphite cathode and the use of a titanium slow wave structure. Both factors prevented the shortening of the microwave pulses. With a proper choice of the magnetic field strength and longitudinal distribution and of the position of the resonant reflector, the pulse-to-pulse deviation of the microwave power was reduced with sacrifice in efficiency, which decreased from a simulated maximum efficiency of 44% to 40% in the simulation and to 35 ± 4% in the experiment. At an accelerating voltage of 418 kV and a magnetic induction of 0.64 T at the cathode, the standard deviation of the microwave pulsed power could be close to the voltage deviation.
17 May 2018 in IEEE Transactions on Electron Devices
This paper presents the results of numerical and experimental study of a Ka-band relativistic Cherenkov oscillator with average diameter of the slow-wave structure D ≈ 2.6λ. (λ is a wavelength). The combined mode selection including the diffraction loss in the electron diode was applied. The high-current accelerator SINUS-200 provided the thin-walled annular electron beam in the range of voltages 350-420 kV and currents of 2.9-3.8 kA at pulsewidth of 10 ns. The generation of 2.5-3-ns pulses at the central frequency 36.4-36.8-GHz and 400-600-MW output microwave peak power was realized. The corresponding efficiency of 42% ± 5% in power conversion has been obtained.
19 August 2010 in IEEE Transactions on Plasma Science
A two-section coaxial vircator with radial electron beam injection and electrodynamic feedback was developed. The use of electron beam premodulation in the vircator allows an increase in efficiency and ensures single-mode oscillation. The vircator operates with no external magnetic field, features a comparatively low operating impedance of the vacuum diode (10-15 Ω), and makes feasible wide-band frequency tuning through varying the resonator parameters. The vircator was simulated using the PIC-code KARAT. It is shown that, in a wide range of electron beam power (10-25 GW), the oscillation efficiency is 12%-15% and the frequency tuning bandwidth is 15 %. In the experiments on a compact linear transformer driver at a cathode voltage of 300 kV, diode current of 20 kA, and driving pulse duration of 250 ns, the single H11 mode oscillation at 2.2 GHz with a 300-MW microwave peak power and 130-ns pulse duration at half the power level was realized.
1 July 2018 in Physics of Plasmas
The concept of two-wave relativistic Cherenkov oscillator for the generation of nanosecond microwave pulses at ∼72 GHz central frequency has been applied. A moderately oversized sectioned slow wave structure (average diameter ≈2.5 wavelength) provides the interaction of electrons simultaneously with a slow (or surface) TM01 wave and a fast (or volume) TM02 wave, which govern the microwave energy output. The generation of 85 MW, 1.3-ns long microwave pulses has been demonstrated in a single pulse operation with a pulsed guiding magnetic field of 3.8 T on the base of the desktop high-current accelerator RADAN-303.
1 February 2014 in Technical Physics Letters
The competition of oscillations in a relativistic backward wave oscillator (RBWO) based on a coaxial waveguide has been studied by theoretical and experimental methods. It is established that the starting current for asymmetric magnetic TE m1 type waves is lower than that for the TEM wave. Predominant excitation of the former waves is confirmed by numerical simulations using the PIC-code KARAT. In an experimental RBWO prototype, the excitation of asymmetric oscillations was suppressed by longitudinal cuts in the central conductor of the coaxial waveguide. As a result, stable generation of the TEM wave has been achieved at a frequency of 1.23 GHz, a peak power of 260 MW, and a 28% efficiency of electron-beam-power conversion into radiation power for a microwave-pulse duration of 33 ns.