Jordan A. Ramsey

Jordan A. Ramsey

Auto-generated profile, based on publicly available information

Jordan A. Ramsey

The Ohio State University 1 Department of Electrical and Computer Engineering Columbus, Ohio 43212, USA

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 August 2020 in IEEE Antennas and Propagation Magazine
Verified
Journal Article
Closed access
KGKatrina Guido
Katrina Guido
CMCarmen Matos
Carmen Matos
JRJordan Ramsey
Jordan Ramsey
Asimina KiourtiAsimina Kiourti
Asimina Kiourti
This article provides one of the first comprehensive reviews of tissue-emulating phantoms available for the in vitro experimentation of radio-frequency (RF) antennas and other electromagnetic (EM) components. Diverse recipes and formulation approaches are available in the literature for such phantoms, but a holistic overview has yet to be reported. We review RF phantoms based on their textures (i.e., liquid, semisolid, and solid) and briefly discuss the use of readily available animal tissues for in vitro experimentation. For each phantom group, we present an overview of the various recipes and fabrication methods, specify the operating frequency range and tissue(s) they emulate, discuss the associated benefits and challenges, and summarize the wireless applications for which they have been employed to date. Further, we review various methods available in the literature to measure the electrical and thermal properties of RF phantoms as required to verify their tissue-emulating capabilities. This review creates a comprehensive resource for ongoing and future studies in the field and is intended to stimulate future research in the development of tissue-emulating phantoms and wireless RF components operating in, on, or near the body.

3 June 2024 in Journal of Applied Physics
Verified
Journal Article
Open access
PDF file
JRJ. A. Ramsey
J. A. Ramsey
SLSeung Yoon Lee
Seung Yoon Lee
WDW. R. Disharoon
W. R. Disharoon
DWD. L. West
D. L. West
NGNima Ghalichechian
Nima Ghalichechian
This study presents a novel implementation of vanadium dioxide (VO2) phase change material in an electromagnetic (EM) surface with beam steering capabilities. For the first time, we present the design, fabrication, and measurement of a globally actuated, VO2-based beamforming reflective EM surface. We propose a design featuring complementary unit cells that enable beam steering with a single excitation, marking a pioneering use of low-loss VO2 in creating a complementary EM surface for the mmWave band. The unit cells incorporating VO2 exhibit low-loss characteristics, with −0.92 and −1.9 dB in the hot state and −0.49 and −0.25 dB in the cold state, respectively. We incorporate both positive and negative phase variants alongside two temperature-independent phase unit cells. The complementary design enables us to utilize two beam operating states, effectively exploiting the otherwise unused cold state. We experimentally demonstrated beamforming at ±5° and ±10° from the broadside. In the case of ±10°, the measured gains at 35 GHz in the cold and hot states were 19.4 and 20.3 dB, respectively, which aligned well with the simulated gains of 20.9 and 21.5 dB. Manipulation of the electromagnetic wave direction with a single excitation has the potential for imaging, sensing, and communication applications. The complementary unit cell design methodology can be further adapted for mmWave beamforming, absorbing, and cloaking reconfigurable EM surfaces. Furthermore, the use of VO2 can be extended up to sub-THz frequencies due to the wideband, low-loss characteristics compared with conventional reconfigurable devices, such as PIN diodes or MEMS switches.

4 November 2019 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
KZKunchen Zhao
Kunchen Zhao
JRJordan A. Ramsey
Jordan A. Ramsey
NGNima Ghalichechian
Nima Ghalichechian
We report the design, fabrication and measurement results of a fully 3D-printed frequency scanning slotted waveguide array (SWA). The antenna system is composed of an 18 × 4 non-resonnt (traveling wave) array operating at 12-18 GHz (Ku band), a wideband 1 × 4 power divider, and four 50-Ω matched loads all fabricated using a 3D printer and wet metallization steps. The antenna system is designed to be impedance matched with S11 less than -10 dB across the entire band. Inductive walls are added to the power divider to improve the impedance matching of closely-packed waveguides. Complex yet smooth waveguides are fabricated using PolyJet technology. Conformal in-house metallization processes consisting of nickel electroless plating and copper electroplating are developedestablished. Measurement results show beam scanning ranges from -17° at 12 GHz to +15° at 18 GHz. The maximum measured gain is 21.4 dBi with sidelobe level of -13.4 dB at 15.8 GHz and scanning angle of 7°with sidelobe level of -13.4 dB and scan angle of -7°. Furthermore, the array maintains minimum gain of 10 dBi for most of the band ranging from 13.4 to 17.8 GHz. Our measurements results are in agreement with the simulations. This work demonstrates a scanning array, together with a wide-band power divider, and termination loads all fabricated using 3D printing technology.