This paper provides a detailed technical description of DEmand LOad REconStructor (DELORES), a new, open-source modelling tool for stochastic simulation of occupant services demand in buildings. By services, one means usually: illumination, sustenance (by way of food preparation), communication (by way of information technology services), and thermal comfort. In the building simulation environment, however, these services are commonly represented through annual transient profiles of internal heat gains, electricity loads, and set point temperatures. The intended capability of DELORES is to stochastically generate such profiles for use in common building energy models, such as TRNSYS and EnergyPlus, and do so whilst presenting users with a straight-forward, easy-to-use interface. By furthering the dissemination of this tool in the public domain, and encouraging it is future development, it is hoped that multidisciplinary research related to stochastic occupant behaviour and energy demand will become an easier task.
Professionals in the building design and operation fields typically look at standards and guidelines as a reliable source of information and guidance with regard to procedural, contractual, and legal scope and requirements that are relevant to accountability issues and compliance necessities. Specifically, indoor environmental quality (IEQ) standards support professionals to bring about comfortable thermal, air quality, acoustic, or visual conditions in buildings. In this context, it appears essential to regularly examine the IEQ standards’ applicability and scientific validity. The present contribution focuses on common thermal comfort standards in view of the reasoning and includes evidence behind their recommendations and requirements. Thereby, several international and national thermal comfort standards are examined via a structured matrix to assess basic parameters, design and performance variables targeted by the standards, suggested value ranges, and both general and specific evidence from the scientific literature. Finally, this paper discusses findings and points to the identified gaps in the chain of evidence from the results of scientific studies and the recommendations included in the thermal standards. As such, the present contribution has the potential to inform future developments regarding transparent and evidence-based thermal standards.
While field research in indoor air quality (IAQ) increasingly uses large numbers of low-cost sensors, detailed validation of each sensor is becoming infeasible, ignored, or undeclared. Questions remain about whether these sensors meet manufacturer or third-party specifications and whether their utility improves with some validation, even under imperfect conditions. This study details the outcomes of a co-location experiment with 87 low-cost IAQ monitors, conducted with the objective of verifying their performance in measuring total volatile organic compounds (tVOCs), particulate matter 2.5 (PM2.5), carbon dioxide (CO2), temperature, and relative humidity. The monitors were installed next to professional-grade reference IAQ instruments in an office with controlled ventilation. A mixed validation methodology was used, involving outlier detection, uncertainty quantification, and performance metric calculations. Results showed that CO2, temperature, and humidity sensors reliably met manufacturer specifications, while tVOC sensors had significant accuracy issues, deviating by up to 79% from reference measurements—substantially more than the stated uncertainty of ±20%. PM2.5 sensors were more consistent but had an error margin of ±27%, compared to the stated ±15%. A total of 5 of the 87 sensors (5.7%) were outliers for at least one IAQ indicator. Despite the need for further long-term validation, this study highlights the importance of performing an experimental evaluation of low-cost IAQ monitors before field deployment.