28 August 2006 in Fusion Engineering and Design
28 May 2014 in Journal of Fusion Energy
11 January 2018 in IEEE Transactions on Applied Superconductivity
The China Fusion Engineering Test Reactor (CFETR) is a new tokamak device. The Central Solenoid (CS) model coil, which is responsible for developing and verifying the key manufacturing methods of a superconducting magnet, is now under engineering design. The rating current of the coil is 47.65 kA and total mag-netically stored energy reaches to 407 MJ, so a quench protection is required to discharge this huge stored energy. This paper gives a description of CS model coil quench protection. The circuit of quench protection system is designed, which consists of direct current circuit breaker (DCCB), discharge resistor, diode and fuse. The main parameters of these components were selected. The control system of quench protection is also introduced.
6 February 2018 in IEEE Transactions on Applied Superconductivity
The central solenoid (CS) model coil (CSMC), which has a high stored energy, is developed to validate the CS manufacturing methods for the China Fusion Engineering Test Reactor (CFETR). The designed operation current of the model coil is 47.65 kA. The maximum rate of the magnetic field is 1.5 T/s. The stored energy of the model coil is 407.6 MJ. A set of verification test of the model coil will be conducted after manufacture, so a CSMC power supply, which generates the current for coil operation, and a quench protection, which could quickly release the stored energy, are required. The main circuit topology of power supply was designed according to the requirements of the testing current waveform. The current control was adopted, which controlled the actual output current provided by the power supply system to track any specified current reference of the model coil within acceptable precision. The design of the quench protection system for model coil was also described in this paper.
8 April 2014 in Journal of Fusion Energy
17 November 2023 in IEEE Transactions on Industry Applications
Power impact frequently occurs during operation of shock loads, such as fusion devices, threatening the stable operation of the power system. Meanwhile, both short-time high pulse and long-time steady power exist, which have distinct time scales and amplitude characteristics. Currently, the capacity of power supply system is designed according to the maximum impulse power, causing the large redundancy and high cost. Aiming at this issue, hybrid power supply scheme based on energy storage technology with high power density provides a potential approach. However, little research focuses on the reasonable static configuration for different type of power supply. This paper presents the non-dominated sorting genetic algorithm (NSGA) algorithm to divide the two kinds of power, where impulse power can be treated by high-density energy storage and stable power is sustained by substation devices. In specific, taking the static investment and dynamic response of energy storage as the objectives, the critical optimal power can be determined. Finally, power scenario based on a typical Tokamak fusion device, international thermos-nuclear experimental reactor (ITER), is applied as case study of the proposed algorithm. The results show that the obtained crucial power can reasonably decrease the static capacity for substation to achieve the optimal economy and satisfy the mentioned objectives, providing the basis for other static capacity allocation circumstances and assisting accurate and high-efficiency smart control for power converters.