Yu Wu

Yu Wu

Auto-generated profile, based on publicly available information

Yu Wu

Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 January 2023 in Science Advances
Verified
Journal Article
Closed access
YSYuntao Song
Yuntao Song
XZXiaolan Zou
Xiaolan Zou
XGXianzu Gong
Xianzu Gong
ABAlain Becoulet
Alain Becoulet
RBRichard Buttery
Richard Buttery
ETEast Team
East Team
Mastering nuclear fusion, which is an abundant, safe, and environmentally competitive energy, is a great challenge for humanity. Tokamak represents one of the most promising paths toward controlled fusion. Obtaining a high-performance, steady-state, and long-pulse plasma regime remains a critical issue. Recently, a big breakthrough in steady-state operation was made on the Experimental Advanced Superconducting Tokamak (EAST). A steady-state plasma with a world-record pulse length of 1056 s was obtained, where the density and the divertor peak heat flux were well controlled, with no core impurity accumulation, and a new high-confinement and self-organizing regime (Super I-mode = I-mode + e-ITB) was discovered and demonstrated. These achievements contribute to the integration of fusion plasma technology and physics, which is essential to operate next-step devices.

2 November 2017 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
YWYu Wu
Yu Wu
YSYi Shi
Yi Shi
JLJiangang Li
Jiangang Li
JQJingang Qin
Jingang Qin
DYDapeng Yin
Dapeng Yin
GMGuanghui Ma
Guanghui Ma
The central solenoid model coil (CSMC) project of China fusion engineering test reactor (CFETR) began in 2014 and the purpose is to develop and verify the manufacture technology of the large-scale superconducting magnet. The Nb 3Sn cable-in-conduit-conductor (CICC) is chosen for CFETR CSMC as the best conductor type because of 12 T field and 1.5 m inner diameter design requirement. The CFETR CSMC consists of two coaxial solenoid coils named Nb3 Sn coil in the high field region and NbTi coil in the low field region to optimize the manufacture cost effectively. The maximum field of the Nb3Sn and NbTi coil can reach to 12 T and 6.1 T, respectively, when the operating current is 47.65 kA. In this paper, first, the basic design aim and operation requirements of CFETR CSMC are summarized. Second, the characteristics of Nb3Sn superconducting strands and CICCs are described in detailed. Subsequently, the basic structure design of CFETR CSMC is presented in the third part. The current sharing temperature and coupling loss measurement of Nb3Sn CICC sample, as the most important stage assessment, are performed in SUTLAN test facility and some meaningful conclusions are.

22 March 2018 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
AXAihua Xu
Aihua Xu
YWYu Wu
Yu Wu
DYDapeng Yin
Dapeng Yin
JJJing Jin
Jing Jin
JQJingang Qin
Jingang Qin
China Fusion Engineering Test Reactor (CFETR) central solenoid (CS) model coil (CSMC) made with cable-in-conduit conductor superconductor had been developed in the Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China. The highest field of CSMC is 12 T when the running current is 47.65 kA, and the largest magnetic field change rate is 1.5 T/S. CSMC mainly consists of two Nb3Sn coils and three outer NbTi coils, buffer zone, feeders and joints, and preload supports. The inner diameter of the coil is 1500 mm, and the outer diameter is 3520 mm. Stress analyzes were performed using coupled solver for simultaneous structural, thermal, and electromagnetic analysis. Based on the generalized Hooke's law, orthotropic smeared property used for the CSMC winding pancake is calculated with one so-called “unit cell” finite-element model of the jacket and insulation. A global finite-element model was created based on the design geometry data to investigate the mechanical property of CFETR CSMC.

1 February 2006 in Fusion Engineering and Design
Verified
Journal Article
Closed access
LHL. Hu
L. Hu
YWY. Wu
Y. Wu

11 December 2013 in Nuclear Fusion
Verified
Journal Article
Open access
PDF file
CSC. Sborchia
C. Sborchia
AOA. Bonito Oliva
A. Bonito Oliva
TBT. Boutboul
T. Boutboul
KCKaren Kar Loen Chan
Karen Kar Loen Chan
ADA. Devred
A. Devred
YWY. Wu
Y. Wu
Construction of the ITER magnet systems has been started at the end of 2007 following the signature of the first procurement arrangements (PA) for the toroidal field (TF) conductors. Six ITER members are involved in the share of the ITER magnet components and, to date, eighteen PA between the ITER Organization and six domestic agencies have been signed. Substantial progress towards full-scale construction has been achieved with the placement of the first large manufacturing contracts, the production of several tens of tons of advanced Nb3Sn and NbTi strand, and the set-up of large cabling and jacketing facilities. The detailed design of the coils and support structures has also been finalized. The qualification of the fabrication processes for the TF coils and poloidal field (PF) coils has been initiated. The detailed design of the central solenoid (CS) coils is being developed. The design of the correction coils (CCs) with their support structures has been finalized, as well as for the TF gravity supports and clamps of the PF coils. The manufacture of prototypes of the feeder lines and current leads has been started, while ITER is in charge of the procurement of the required magnet instrumentation. This paper provides a progress report on the ITER magnet construction as per December 2010.

30 March 2018 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
DYDapeng Yin
Dapeng Yin
YWYu Wu
Yu Wu
HHHouxiang Han
Houxiang Han
AXAihua Xu
Aihua Xu
QHQiangwang Hao
Qiangwang Hao
XLXiaogang Liu
Xiaogang Liu
In order to verify key techniques and manufacturing aspects of the central solenoid (CS) coil of the China fusion engineering test reactor (CFETR), the Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP) plan to develop a CS model coil. The conceptual design of the CS model coil of CFETR has been carried out by ASIPP. The CS model coil shall produce a 12-T peak field in the bore of the magnet. The maximum magnetic field change rate is 1.5 T/s. The designed operating current is 47.65 kA. The CFETR CS model coil structure design mainly includes coil winding design, buffer zone design, preload structure design, coil joints and joint supports design, and liquid helium cooling channels design. This paper presents the conceptual design of CFETR CS model coil structure based on electromagnetic design and optimization.