19 May 2022 in IEEE Transactions on Applied Superconductivity
A large scale research and development project for China Fusion Engineering Test Reactor (CFETR) named the comprehensive research facility for fusion technology (CRAFT) started in 2019 and is scheduled for completion in 2025. A super-conducting conductor experiment testing platform (Super-X for short) is a sub-task of CRAFT to evaluate the future supercon-ducting part performance. The maximum testing magnetic field at bore center is 15 T, the dimensions of testing space are 100 × 160 × 550 mm, the field homogeneity of testing space is superior to 95%, and the maximum testing current is 100 kA. The direct current (DC) magnet is the key sub-system for the facility provid-ing the background magnetic field. The engineering design for DC magnet has been accomplished in the middle of this year, and its technical parameters meet the required. The main work focus-es on the structural design of the split coils, the axial preload and the hanging assembly. This paper presents the progress on the engineering design of the DC magnet.
22 June 2021 in IEEE Transactions on Applied Superconductivity
The engineering design of the China Fusion Engineering Test Reactor (CFETR) has been completed in 2020. A largescale R&D project for CFETR named the comprehensive research facility for fusion technology (CRAFT) was initiated in Sep. 2019. As a sub-task of the CRAFT, a superconducting experiment testing platform (Super-X for short) is planned to be constructed for evaluating the future superconducting parts performance. Its main technical parameter includes: the background field of 15 T, the dimensions of testing space of 100 × 160 × 550 mm, the field homogeneity of testing space ≥ 95%, and the maximum testing current of 100 kA. For now, the preliminary design for Super-X has been accomplished. The DC magnet provides the background magnetic field for Super-X. It is a kind of split coil that includes two symmetrical coils assemblies. The innermost diameter is about 644 mm, the outermost diameter is 2874 mm. Each coil assembly is composed of three concentric Nb 3 Sn coils. The peak field is 15.7 T and the field homogeneity reach to 98.2%. The high field coil (HFC) and medium field coil (MFC) is typically dominated by high-J c Nb 3 Sn cable-in-conduit conductor (CICC), and the low field coil (LFC) by ITER grade Nb 3 Sn CICC. This paper presents the preliminary design of the background DC magnet system (BM).
11 January 2018 in IEEE Transactions on Applied Superconductivity
The China Fusion Engineering Test Reactor (CFETR) is a new tokamak device. The Central Solenoid (CS) model coil, which is responsible for developing and verifying the key manufacturing methods of a superconducting magnet, is now under engineering design. The rating current of the coil is 47.65 kA and total mag-netically stored energy reaches to 407 MJ, so a quench protection is required to discharge this huge stored energy. This paper gives a description of CS model coil quench protection. The circuit of quench protection system is designed, which consists of direct current circuit breaker (DCCB), discharge resistor, diode and fuse. The main parameters of these components were selected. The control system of quench protection is also introduced.
6 February 2018 in IEEE Transactions on Applied Superconductivity
The central solenoid (CS) model coil (CSMC), which has a high stored energy, is developed to validate the CS manufacturing methods for the China Fusion Engineering Test Reactor (CFETR). The designed operation current of the model coil is 47.65 kA. The maximum rate of the magnetic field is 1.5 T/s. The stored energy of the model coil is 407.6 MJ. A set of verification test of the model coil will be conducted after manufacture, so a CSMC power supply, which generates the current for coil operation, and a quench protection, which could quickly release the stored energy, are required. The main circuit topology of power supply was designed according to the requirements of the testing current waveform. The current control was adopted, which controlled the actual output current provided by the power supply system to track any specified current reference of the model coil within acceptable precision. The design of the quench protection system for model coil was also described in this paper.
10 March 2022 in IEEE Transactions on Applied Superconductivity
The Chinese Fusion Engineering Testing Reactor (CFETR) is aiming to bridge the gap between the International Thermonuclear Experimental Reactor (ITER) and the first commercial fusion power plant, a necessary complement of the ITER. The requirement for sustaining long burn duration as specified in the duty time CFETR mission necessitates the use of superconducting magnets. Totally 16 toroidal field (TF)D-shaped coils which are of cable-in-conduit conductor type are designed. All the subcomponents have very demanding requirement to withstand the severe environments. This paper gives the nondestructive examination (NDE) method developed for the jacket of TF conductor which is made of 316L stainless steel. Based on the linear elastic fracture mechanics, maximum acceptable defect sizes in the TF jacket material have been defined. Phased array ultrasonic testing(PAUT)method and eddy current test (ECT) method were developed for the circular-in-square jacket inspection. For PAUT method, focus laws were calculated and optimized. For ECT method, specific ECT probe was designed and manufactured. Benchmark experiments were carried out to study the NDE reliability.