Jonas Borgmans

Jonas Borgmans

Auto-generated profile, based on publicly available information

Jonas Borgmans

Department of Electronics and Information Systems (ELIS), Ghent University, Gent, Belgium

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 April 2021 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Open access
JBJonas Borgmans
Jonas Borgmans
RRRobbe Riem
Robbe Riem
PRPieter Rombouts
Pieter Rombouts
In this work, we focus on the three most relevant pseudo-digital ring oscillator circuits for VCO A/D conversion. First, we show that they can be accurately modeled by an equivalent 2-terminal diode-like element. Next, we study the main analog performance figures: the effective oscillation frequency (which affects the quantization noise of a VCO ADC), the input referred noise and the power efficiency both for voltage and current control. We do this both through theoretical modeling as well as through simulations, which are in good agreement with each other. Our study highlights several important independencies: e.g. most performance metrics are independent on the number of VCO stages and the external load capacitance on the VCO nodes. In contrast to these independencies, we identify several important dependencies. In particular, we show that the biasing of the ring has an enormous impact on power efficiency of the ring. This dependency is different for the case of a voltage- or current mode configuration of the ring.

1 May 2019 in Electronics Letters
Verified
Journal Article
Open access
PDF file
JBJ. Borgmans
J. Borgmans
PRPieter Rombouts
Pieter Rombouts
Recently an extremely linear voltage‐controlled ring‐oscillator for use in VCO‐ADCs was proposed by Babaie‐Fishani and Rombouts. In this current Letter, a circuit‐level technique to improve the bandwidth and noise performance of such a linear VCO is proposed. The key element is the modified delay cell, where the traditional cross‐coupled inverters are modified into ‘feed‐forward’ coupling inverters that pre‐charge the subsequent elements in the ring. The resulting circuit maintains the excellent linearity, but has greatly enhanced bandwidth (up to 3 times higher) and considerably reduced power for the same circuit noise level (up to 2.5 times lower).

7 December 2021 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Open access
JBJonas Borgmans
Jonas Borgmans
ESElisa Sacco
Elisa Sacco
PRPieter Rombouts
Pieter Rombouts
GGGeorges Gielen
Georges Gielen
For the design of ring oscillator-based ADCs, little has been reported on how to optimally co-design the readout scheme and the ring oscillator core towards optimal energy efficiency. This paper describes a methodology to find this optimum for a target SQNR and signal bandwidth, for the case of 1 st -order quantization noise shaping. In short, starting from initial assumptions on the VCO, the readout optimization boils down to finding the best VCO frequency. From this, the number of readout phases, the sampling frequency of the readout and the number of bits in the quantizers are derived. Then, it is explained how to adjust the VCO core toward the corresponding optimal VCO configuration. This is discussed for the case of a current-controlled ring oscillator, indicating the main constraints that define the design space for such a VCO optimization. If the actual VCO configuration is bounded by practical constraints, this approach can be re-iterated where a new readout optimization is performed taking these constraints into account.

17 June 2021 in IEEE Sensors Journal
Verified
Journal Article
Open access
RRRobbe Riem
Robbe Riem
JRJohan Raman
Johan Raman
JBJonas Borgmans
Jonas Borgmans
PRPieter Rombouts
Pieter Rombouts
We present a compact, versatile Hall readout system with digital output, fully integrated in 180nm technology. The core of the system is an instrumentation amplifier architecture that provides inherent anti-aliasing filtering, where the anti-aliasing characteristic is locked into a shape that maximally prevents aliasing to low frequencies. The efficiency for blocking out-of-band white noise is comparable to that of a second-order filter, eliminating the need for an explicit anti-aliasing filter before the ADC. Chopping/spinning is applied for up-modulating offset and 1/f noise to just beyond the signal band. A mostly-digital ripple reduction loop (RRL) is added for mitigating offset-related dynamic range limitations. In this, a bilinear integrator is introduced for eliminating the impact of the RRL on the system's DC gain. Moreover, the resolution of the DAC generating the analog offset compensation is reduced significantly, and the effect thereof is eliminated by digital noise cancellation logic. The one-step amplification and the simple, low-resolution DAC for offset compensation both aid in keeping the area footprint low: the analog circuits (including DAC and ADC) only occupy 0.21mm 2 . Notable performance characteristics are an input-referred noise floor of 55nT/ √{Hz} within a 410kHz bandwidth, a current consumption of only 5.1mA, and a 47dB dynamic range. The amplifier architecture can be easily applied as an analog preconditioning circuit in other sensor readout situations as well.

26 February 2024 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Open access
BSBrendan Saux
Brendan Saux
JBJonas Borgmans
Jonas Borgmans
JRJohan Raman
Johan Raman
PRPieter Rombouts
Pieter Rombouts
This brief identifies the cause of frequency-dependent distortion in ring oscillator voltage-controlled oscillator (VCO) analog-to-digital converters (ADCs). First, a VCO model is presented which takes into account the capacitance at the VCO terminals. This allows the most common drive configurations to be analyzed to determine the origin of the frequency-dependent distortion and the vulnerability of the different drive configurations. A conclusion is that voltage control is relatively robust against this effect. Based on the preceding analysis, a novel foreground calibration procedure is developed. The effectiveness of the proposed calibration method is demonstrated for a manufactured open-loop VCO ADC in 28nm CMOS and compared to results obtained using a prior art calibration method and results without calibration. For a 750 mVpp 26.5 MHz signal, the proposed calibration procedure leads to an improvement in THD of 20 dB and 47 dB compared to results using prior art calibration and no calibration respectively.

21 November 2022 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Open access
JBJonas Borgmans
Jonas Borgmans
PRPieter Rombouts
Pieter Rombouts
In this work, we focus on the Power Supply Rejection and Common Mode Rejection performance of inverter based ring oscillators intended for use in VCO ADCs. We show that they are closely related to the circuit’s mismatch behavior of which we perform a systematic analysis. To this end, we construct a theoretical mismatch model for these ring oscillators, based on Pelgrom’s mismatch model. In addition, we generalize this model to include the mismatch in a generic tuning circuit. In this broad analysis, we show that, next to the obvious transistor size dependence, the mismatch is inversely proportional to the number of stages and hence, in theory, can always be suppressed up to the desired level in a VCO ADC, provided that the tune circuit is sized adequately. Furthermore, we demonstrate that the mismatch is dependent on the biasing of the ring, which becomes even more apparent when taking into account the influence of a tuning circuit. More specifically, strong inversion is almost always better than weak inversion, and current control is preferred over voltage control. Finally, we perform extensive Monte Carlo simulations, with a commercially available 65nm CMOS process, which match our analytical predictions nearly perfectly.