Low Energy Electronic Systems (LEES), Singapore-MIT Alliance for Research and Technology (SMART) 1 , 1 CREATE Way, #10-01 CREATE Tower, Singapore 138602
Auto-generated profile, based on publicly available information
Shuyu Bao
Low Energy Electronic Systems (LEES), Singapore-MIT Alliance for Research and Technology (SMART) 1 , 1 CREATE Way, #10-01 CREATE Tower, Singapore 138602
A method to remove the misfit dislocations and reduce the threading dislocations density (TDD) in the germanium (Ge) epilayer growth on a silicon (Si) substrate is presented. The Ge epitaxial film is grown directly on the Si (001) donor wafer using a “three-step growth” approach in a reduced pressure chemical vapour deposition. The Ge epilayer is then bonded and transferred to another Si (001) handle wafer to form a germanium-on-insulator (GOI) substrate. The misfit dislocations, which are initially hidden along the Ge/Si interface, are now accessible from the top surface. These misfit dislocations are then removed by annealing the GOI substrate. After the annealing, the TDD of the Ge epilayer can be reduced by at least two orders of magnitude to <5 × 106 cm−2.
GeSn-on-insulator (GeSnOI) on Silicon (Si) substrate was realized using direct wafer bonding technique. This process involves the growth of Ge1-xSnx layer on a first Si (001) substrate (donor wafer) followed by the deposition of SiO2 on Ge1-xSnx, the bonding of the donor wafer to a second Si (001) substrate (handle wafer), and removal of the Si donor wafer. The GeSnOI material quality is investigated using high-resolution transmission electron microscopy, high-resolution X-ray diffraction (HRXRD), atomic-force microscopy, Raman spectroscopy, and spectroscopic ellipsometry. The Ge1-xSnx layer on GeSnOI substrate has a surface roughness of 1.90 nm, which is higher than that of the original Ge1-xSnx epilayer before transfer (surface roughness is 0.528 nm). The compressive strain of the Ge1-xSnx film in the GeSnOI is as low as 0.10% as confirmed using HRXRD and Raman spectroscopy.
The material properties and bonding behavior of silane-based silicon oxide layers deposited by plasma-enhanced chemical vapor deposition were investigated. Fourier transform infrared spectroscopy was employed to determine the chemical composition of the silicon oxide films. The incorporation of hydroxyl (–OH) groups and moisture absorption demonstrates a strong correlation with the storage duration for both as-deposited and annealed silicon oxide films. It is observed that moisture absorption is prevalent in the silane-based silicon oxide film due to its porous nature. The incorporation of –OH groups and moisture absorption in the silicon oxide films increase with the storage time (even in clean-room environments) for both as-deposited and annealed silicon oxide films. Due to silanol condensation and silicon oxidation reactions that take place at the bonding interface and in the bulk silicon, hydrogen (a byproduct of these reactions) is released and diffused towards the bonding interface. The trapped hydrogen forms voids over time. Additionally, the absorbed moisture could evaporate during the post-bond annealing of the bonded wafer pair. As a consequence, defects, such as voids, form at the bonding interface. To address the problem, a thin silicon nitride capping film was deposited on the silicon oxide layer before bonding to serve as a diffusion barrier to prevent moisture absorption and incorporation of –OH groups from the ambient. This process results in defect-free bonded wafers.
We investigate the thermal stability of germanium-tin (Ge1−xSnx) fins under rapid thermal annealing in N2 ambient. The Ge1−xSnx fins were formed on a GeSn-on-insulator substrate and were found to be less thermally stable than blanket Ge1−xSnx films. The morphology change and material quality of the annealed Ge1−xSnx fin are investigated using scanning electron microscopy, Raman spectroscopy, high-resolution transmission electron microscopy, energy-dispersive X-ray spectroscopy, and electron energy loss spectroscopy. Obvious degradation of crystalline quality of the Ge0.96Sn0.04 fin was observed, and a thin Ge layer was formed on the SiO2 surface near the Ge0.96Sn0.04 fin region after 500 °C anneal. A model was proposed to explain the morphology change of the Ge0.96Sn0.04 fin.