1 July 2022 in IEEE Robotics and Automation Letters
Soft robotic grippers have attracted considerable attention in terms of the advantages of the high compliance and robustness to variance in object geometry; however, they are still limited by the corresponding sensing capabilities. We propose a novel soft gripper that looks like a ‘granary’ in the geometrical shape with a snap-through bistable mechanism fabricated by an ordered mold technology, which consists of a palm chamber, shell, cap and three fingers. It can achieve ‘sensing’ mechanically and perform pinching, enveloping and caging grasps for objects with various profiles. In particular, the snap-through bistable mechanism in the proposed gripper allows us to reduce the complexity of the mechanism, control, and sensing designs. The grasping behavior is activated once the gripper's deformation or perceived pressure arrives at a certain value. First, after the theoretical model for snap-through behavior is constructed, the modularized design of the gripper is described in detail. Then, the ordered molding method is employed to fabricate the proposed gripper. Finally, the finite element (FE) simulations are conducted to verify the built theoretical model. Further, a series of grasping experiments are carried out to assess the performance of the proposed gripper on grasping and sensing. The experimental results illustrate that the proposed gripper can manipulate a variety of soft and rigid objects and remain stable even though it undergoes external disturbances.
22 April 2024 in IEEE Transactions on Robotics
Recent advancements in soft robotics have seen the rapid development of soft grippers for industrial pick-and-place applications. They are however ill-suited to bear heavy loads due to their compliant nature. Paradoxically, researchers have sought to increase the stiffness of soft grippers to improve loadbearing capabilities. Unfortunately, contemporary soft actuators with variable stiffness are fabricated using manual processes and their performance is subject to an individual's mastery. They are hence not reliable for long-term industrial use. In this paper, we present our work on a 3D-printed metalendoskeleton-reinforced actuator (MERA) for industrial pickand-place applications. We also highlight the fabrication processes needed to recreate it repetitively. Using stainless steel splints (SSS), we demonstrate that MERA is able to modulate its stiffness at selective junctures for stable and effective grasping. We also describe our design rationale with a qualitative mathematical model and validate its performance quantitatively using a finite element model, which is further investigated in the following fatigue test. In our experiments, the MERA equipped with SSS is able to output a peak tip force of 8N, which is a 291% increase compared to the one without metallic reinforcement. In addition, an increase of 76.5% in gripping load and a maximum holding force per actuator of 13.8N are realized through the stiffness tuning of a MERA-Gripper. Despite significantly improving loadbearing capabilities, the actuator manages to retain an overall low profile with a weight of 82g. Finally, we adapted the MERA into a reconfigurable gripper and tested its grasping capabilities on objects of various shapes, sizes, and weights.
24 January 2025 in IEEE Access
This paper introduces a novel soft robotic surgical retractor system, designed to overcome the limitations of traditional surgical retractors through the integration of soft robotics. Unlike conventional rigid retractors, this innovative system features a dual-component design combining a 3D-printed thermoplastic polyurethane actuator with a stainless-steel splint (SSS), enabling variable stiffness for more effective and less traumatic tissue retraction. The study presents a comprehensive evaluation, including bending angle, blocked force measurements, actuation time efficiency, and a comparative analysis with traditional stainless steel Langenbeck retractors. Results demonstrate the soft robotic retractor’s superior performance, especially when utilizing the tip for retraction, indicating a significant alignment with the requirements for abdominal organ retraction. Furthermore, the system exhibited reduced deformation to retracted soft objects, suggesting a potential for minimizing tissue trauma compared to conventional retractors. The study proposes directions for enhancing retraction strength, optimizing design for improved force output, and conducting comprehensive testing to ensure clinical viability. This work lays the groundwork for future advancements in soft robotic surgical retractors, promising to revolutionize surgical retraction practices by offering enhanced safety and efficiency.