In this work, the time development of plasmas produced by interaction of laser pulses, with a nitrogen gas, was investigated. The interaction took place inside a small portion of dense nitrogen gas injected temporarily into a chamber filled with the gas under low pressure. High-temperature plasmas produced directly by the laser pulse were a source of soft x rays and charged particles, ionizing and exciting the surrounding gas. In this way, low-temperature plasmas were produced. The formation of high-temperature plasmas was studied using soft x-ray spectroscopy and x-ray streak imaging. Low-temperature plasmas formed at various distances from the laser focus were investigated using an optical streak camera. Interpretation of the experimental data was supported by numerical modeling of the laser-produced plasma hydrodynamics. It was concluded that depending on the distance from the focal spot, the formation of the low-temperature plasmas was dominated by ion streams or by soft x-ray radiation.
The paper is aimed at optimization of parameters of a copper plasma jet produced at the DPF-1000U device, in which the inner electrode face was conically shaped. Preliminary information was obtained by numerical simulations of the plasma jet creation for different copper cones with the use of the two-dimensional magneto-hydrodynamic code KAROL. The simulations suggested that the cone height in the range of 4–7 cm should ensure a good plasma jet quality. The experimental data delivered by means of a 16-frame laser interferometer and a four-frame X-ray pinhole camera fully confirmed this conclusion. In the paper, we demonstrate the results for a 5 cm height cone. The eroded Cu plasma, swept up by the deuterium plasma sheath, was accelerated axially and compressed to very small diameter (3 mm) with an electron density of 7 × 1018 cm−3. The Cu plasma jet achieved a velocity of 5 × 107 cm/s and reached in the period of about 230 ns a distance (length) of 7 cm. The above results prove a successful adaptation of the plasma focus device to the metallic plasma jet generator.
Multidimensional modeling of phenomena and processes occurring during the expansion of the laser-produced plasma for different irradiation conditions related to both the laser beam parameters and the target constructions is a very complex issue, especially when modeling requires consideration of kinetic processes associated with the development of various types of microscopic instability. Multidimensional PIC codes create such a possibility, but their use is limited to modeling phenomena even in a very narrow timescale due to the limited computational capabilities of current supercomputers. For this reason, the paper attempts to interpret the results of the spontaneous magnetic field (SMF) measurements obtained during the PALS (Prague Asterix Laser System) experiment [Pisarczyk et al., AIP Adv. 10, 115201 (2020); Pisarczyk et al., Phys. Plasmas 22, 102706 (2015)] based on the 2D magneto-hydrodynamic (MHD) model [Jach et al., Computer Modeling of Dynamic Interaction of Bodies by Free Point Method (PWN, Warsaw, 2011)]. The MHD equations were used with included arbitrary (i) current of hot electrons treating it as an additional external current and (ii) ion-sound instability responsible for the increase in anomalous resistance in areas with high temperature and low-density plasma. The spatial distribution of magnetic fields and current density obtained from 2D modeling are in acceptable agreement with the experimental results [Pisarczyk et al., Plasma Phys. Controlled Fusion 62, 115020 (2020); Zaraś-Szydłowska et al., AIP Adv. 10, 115201 (2020); Pisarczyk et al., Phys. Plasmas 22, 102706 (2015)]. The inclusion of temporal changes in anomalous resistance in modeling allowed us to explain the persistence of high SMF amplitude at the level of several megagauss after the laser pulse ended due to the effect of magnetic field freezing.
The laser-induced Cavity Pressure Acceleration (CPA) scheme [S. Borodziuk et al., Appl. Phys. Lett. 95, 231501 (2009)] allows for effective transformation of the laser energy into the kinetic energy of plasma streams and dense plasma objects. It has been proven that using long-wavelength laser beams, with relatively low energies (up to 500 J for λ1 = 1.315 µm and FWHM = 350 ps), it is possible to accelerate macroparticles to very high velocities (above 107 cm/s). The study of neutron yield showed the benefit of CPA in delivering ion temperatures and density sufficient to reach the thermonuclear region.
This paper aims at investigation of efficiency of an ablative plasma energy transfer into a massive aluminum target using different atomic number ablators. For this reason, several target materials representing a wide range of atomic numbers (Z = 3.5–73) were used. The experiment was carried out at the iodine Prague Asterix Laser System. The laser provided a 250 ps pulse with energy of 130 J at the third harmonic frequency (λ3 = 0.438 μm). To study the plasma stream configurations a four-frame X-ray pinhole camera was used. The electron temperature of the plasma in the near-surface target region was measured by means of an X-ray spectroscopy. The efficiency of the plasma energy transport to the target was determined via the crater volume measurement using the crater replica technique. The experimental results were compared with two-dimensional numerical simulations where the plasma dynamics was based on the one-fluid, two temperature model, including radiation transport in diffusive approximation and ionization kinetics. It was shown that the plasma expansion geometry plays an important role in the ablative plasma energy transfer into the target.
Laser plasma produced using a double-stream gas puff target is an intense source of soft x-ray (SXR) and extreme ultraviolet (EUV) radiation, however, without the harmful emission of debris associated with a solid target. Debris-free laser plasma x-ray and EUV sources have been applied in many various applications, including metrology, imaging in a nanoscale, tomography, processing materials, emission and absorption spectroscopy, laboratory astrophysics and astrochemistry, radiobiology, and radiochemistry. In this work, the results of the experimental and theoretical studies on the spatial and temporal evolution of laser plasma produced as a result of irradiation of an argon/helium gas puff target with laser pulses of 1.3 or 6 ns time duration generated with an Nd:YAG laser system are presented. Imaging and spectral measurements of SXR emission from the plasma, created in the double-stream gas puff target, have been performed with the use of an x-ray streak camera. The analysis of the results of spectral measurements, supported by numerical simulations of plasma x-ray emission, allowed the estimation of the plasma electron temperature and its changes over time. Experimental data were compared with the results of theoretical studies performed using a computer model of plasma hydrodynamics. It was shown that plasma expansion is fast enough to reduce the plasma density in the laser focus area during the laser–plasma interaction.