10 January 2014 in Laser and Particle Beams
The paper is directed to the study of high-temperature plasma and ablation plasma formation as well as efficiency of the laser energy transfer to solid targets irradiated by laser pulses with intensities of 1–50 PW/cm2and duration of 200–300 ps, i.e., at conditions corresponding to the characteristics of the laser spike designed to generate the igniting shock wave in the shock ignition concept. The experiments have been performed at Prague Asterix Laser System. The iodine laser delivered 250 ps (full width at half maximum) pulses with the energy in the range of 100–600 J at the first (λ1 = 1.315 µm) and third (λ3 = 0.438 µm) harmonic frequencies. The focal spot radius of the laser beam on the surface of Al or Cu targets made was gradually decreased from 160 to 40 µm. The diagnostic data collected using three-frame interferometry, X-ray spectroscopy, and crater replica technique were interpreted by two-dimensional numerical and analytical modeling which included generation and transport of fast electrons. The coupling parameterIλ2was varied in the range of 1 × 1014−8 × 1016 Wμm2/cm2covering the regimes of weak to intense fast electron generation. The dominant contribution of fast electron energy transfer into the ablation process and shock wave generation was found when using the first harmonic laser radiation, the focal spot radius of 40–100 µm, and the laser energy of 300–600 J.
12 February 2013 in Plasma Physics and Controlled Fusion
23 October 2009 in IEEE Transactions on Plasma Science
A plasma column generated in the PF-1000 device working in deuterium gas at a current level of 1 MA was investigated with interferometric diagnostics and scintillation detectors. The beam of diagnostic laser of 527-nm wavelength was optically split into 16 beams with a time delay in the range from 0 to 220 ns. This diagnostic tool makes possible the imaging of the evolution of pinch geometry, the axial and radial distributions of plasma density in the column at the stagnation phase, and their comparison with the evolution of X-ray and neutron production. The evolution of dense structure is described with respect to its importance for fusion processes.
5 October 2020 in Plasma Physics and Controlled Fusion
Laser plasma created by intense light interaction with matter plays an important role in high-energy density fundamental studies and many prospective applications. Terawatt laser-produced plasma related to the low collisional and relativistic domain may form supersonic flows and is prone to the generation of strong spontaneous magnetic fields. The comprehensive experimental study presented in this work provides a reference point for the theoretical description of laser-plasma interaction, focusing on the hot electron generation. It experimentally quantifies the phenomenon of hot electron retention, which serves as a boundary condition for most plasma expansion models. Hot electrons, being responsible for nonlocal thermal and electric conductivities, are important for a large variety of processes in such plasmas. The multiple-frame complex-interferometric data providing information on time resolved spontaneous magnetic fields and electron density distribution, complemented by particle spectra and x-ray measurements, were obtained under irradiation of the planar massive Cu and plastic-coated targets by the iodine laser pulse with an intensity of above 1016 W cm−2. The data shows that the hot electron emission from the interaction region outside the target is strongly suppressed, while the electron flow inside the target, i.e. in the direction of the incident laser beam, is a dominant process and contains almost the whole hot electron population. The obtained quantitative characterization of this phenomenon is of primary importance for plasma applications spanning from ICF to laser-driven discharge magnetic field generators.
1 October 2017 in Physics of Plasmas
The problem of spontaneous magnetic field generation with nanosecond laser pulses raises a series of fundamental questions, including the intrinsic magnetization mechanisms in laser-driven plasmas and the understanding of charge-discharge processes in the irradiated target. These two issues are tightly bound as the charge-discharge processes are defined by the currents, which have in turn a feedback by magnetic fields in the plasma. Using direct polaro-interferometric measurements and theoretical analysis, we show that at parameters related to the PALS laser system ( m, ps, and W/cm2), fast electrons play a decisive role in the generation of magnetic fields in the laser-driven plasma. Spatial distributions of electric currents were calculated from the measured magnetic field and plasma density distributions. The obtained results revealed the characteristics of strong currents observed in capacitor-coil magnetic generation schemes and open a new approach to fundamental studies related to magnetized plasmas.
1 February 2021 in Review of Scientific Instruments
This paper describes design, development, and implementation of a multi-channel magnetic electron spectrometer for the application in laser–plasma interaction experiments carried out at the Prague Asterix Laser System. Modular design of the spectrometer allows the setup in variable configurations to evaluate the angular distribution of hot electron emission. The angular array configuration of the electron spectrometers consists of 16 channels mounted around the target. The modules incorporate a plastic electron collimator designed to suppress the secondary radiation by absorbing the wide angle scattered electrons and photons inside the collimator. The compact model of the spectrometer measures electron energies in the range from 50 keV to 1.5MeV using ferrite magnets and from 250 keV to 5MeV using stronger neodymium magnets. An extended model of the spectrometer increases the measured energy range up to 21MeV or 35MeV using ferrite or neodymium magnets, respectively. Position to energy calibration was obtained using the particle tracking simulations. The experimental results show the measured angularly resolved electron energy distribution functions from interaction with solid targets. The angular distribution of hot electron temperature, the total flux, and the maximum electron energy show a directional dependence. The measured values of these quantities increase toward the target normal. For a copper target, the average amount of measured electron flux is 1.36 × 1011, which corresponds to the total charge of about 21 nC.