4 February 2025 in IEEE Transactions on Signal Processing
This paper addresses the suboptimal energy efficiency of conventional digital precoding schemes in multiple-input multiple-output (MIMO) systems. Through an analysis of the power amplifier (PA) output power distribution associated with conventional precoders, it is observed that these power distributions can be quite uneven, resulting in large PA backoff (thus low efficiency) and high power consumption. To tackle this issue, we propose a novel approach called flat precoding, which aims to control the flatness of the power distribution within a desired interval. In addition to reducing PA power consumption, flat precoding offers the advantage of requiring smaller saturation levels for PAs, which reduces the size of PAs and lowers the cost. To incorporate the concept of flat power distribution into precoding design, we introduce a new lower-bound per-antenna power constraint alongside the conventional sum power constraint and the upper-bound per-antenna power constraint. By adjusting the lower-bound and upper-bound values, we can effectively control the level of flatness in the power distribution. We then seek to find a flat precoder that satisfies these three sets of constraints while maximizing the weighted sum rate (WSR). In particular, we develop efficient algorithms to design weighted minimum mean squared error (WMMSE) and zero-forcing (ZF)-type precoders with controllable flatness features that maximize WSR. Numerical results demonstrate that complete flat precoding approaches, where the power distribution is a straight line, achieve the best trade-off between spectral efficiency and energy efficiency for existing PA technologies. We also show that the proposed ZF and WMMSE precoding methods can approach the performance of their conventional counterparts with only the sum power constraint, while significantly reducing PA size and power consumption.
28 January 2020 in IEEE Access
As a non-linear precoding alternative to Tomlinson-Harashima precoding (THP), in this paper, so-called lattice reduction aided precoding (LRP) is considered as a crosstalk precompensation technique for downstream transmission in G.fast DSL networks. First, a practically achievable bit-rate expression for LRP is proposed in function of the precoder and integer matrix. The problem then consists of a joint precoder and integer matrix design in order to maximize the weighted sum-rate (WSR) under per-line power constraints. For a fixed integer matrix, zero-forcing (ZF) precoder matrix design simplifies to gain scaling optimization with complex gain scalars, for which a successive lower bound maximization method is presented. Additionally, it is established that the achievable ZF-LRP sum-rate is upper bounded by the achievable ZF-THP sum-rate at high SNR. For computing the optimal precoder matrix, on the other hand, an efficient method is developed by leveraging on the equivalence between the WSR maximization and the weighted sum of mean squared error (MSE) minimization, leading to a locally-optimal MMSELRP solution. Simulations with a measured G.fast cable binder are provided to compare the proposed LRP schemes with THP schemes.
18 December 2025 in IEEE Wireless Communications
Neural network-based compression and decompression of channel state feedback has been one of the most widely studied applications of machine learning (ML) in wireless networks. Various simulation-based studies have shown that ML-based feedback compression can result in reduced overhead and more accurate channel information. However, to the best of our knowledge, there are no real-life proofs of concepts demonstrating the benefits of ML-based channel feedback compression in a practical setting, where the user equipment (UE) and base station have no access to each others’ ML models. In this paper, we present a novel approach for training interoperable compression and decompression ML models in a confidential manner, and demonstrate the accuracy of the ensuing models using prototype UEs and base stations. The performance of the ML-based channel feedback is measured both in terms of the accuracy of the reconstructed channel information and achieved downlink throughput gains when using the channel information for beamforming. The reported measurement results demonstrate that it is possible to develop an accurate ML-based channel feedback link without having to share ML models between device and network vendors. These results pave the way for a practical implementation of ML-based channel feedback in commercial 6G networks.