4 August 2017 in Modelling and Simulation in Materials Science and Engineering
Welding is one of the most wide-spread processes used in metal joining. However, there are currently no open-source software implementations for the simulation of microstructural evolution during a weld pass. Here we describe a Potts Monte Carlo based model implemented in the SPPARKS kinetic Monte Carlo computational framework. The model simulates melting, solidification and solid-state microstructural evolution of material in the fusion and heat-affected zones of a weld. The model does not simulate thermal behavior, but rather utilizes user input parameters to specify weld pool and heat-affect zone properties. Weld pool shapes are specified by Bézier curves, which allow for the specification of a wide range of pool shapes. Pool shapes can range from narrow and deep to wide and shallow representing different fluid flow conditions within the pool. Surrounding temperature gradients are calculated with the aide of a closest point projection algorithm. The model also allows simulation of pulsed power welding through time-dependent variation of the weld pool size. Example simulation results and comparisons with laboratory weld observations demonstrate microstructural variation with weld speed, pool shape, and pulsed-power.
8 May 2023 in Journal of Peridynamics and Nonlocal Modeling
Peridigm is a meshfree peridynamics code written in C++ for use on large-scale parallel computers. It was originally developed at Sandia National Laboratories and is currently managed as an open-source, community driven software project. Its primary features include bond-based, state-based, and non-ordinary state-based constitutive models, bond failure laws, contact, and support for explicit and implicit time integration. To date, Peridigm has been used primarily by methods developers focused on solid mechanics and material failure. Peridigm utilizes foundational software components from Sandia’s Trilinos project and was designed for extensibility. This paper provides an overview of the solution methods implemented in Peridigm, a discussion of its software infrastructure, and demonstrates the use of Peridigm for the solution of several example problems.
11 October 2010 in Journal of Microelectromechanical Systems
Design and fabrication of microelectromechanical systems (MEMS) can be costly, time consuming, and necessitating accurate models for their behavior. Current theoretical models of bistable beams in MEMS devices are limited to numerical or small deformation models and current measurement techniques are unable to fully characterize these devices as they only determine thresholds or have resolutions that are too coarse to adequately explore the force-deflection relationship of bistable mechanisms. Two analytical models are developed: a stepped Euler-Bernoulli beam and a large deformation model. To validate these models, a new technique for measuring in-plane mechanical properties of MEMS devices is introduced that measures normal and lateral forces against a probe tip, while electrostatic actuation and a force-feedback loop maintain the desired tip position. This allows true displacement-controlled measurements along two axes and facilitates automated positioning. Measurements validate the large deformation model and show that Euler-Bernoulli beam theory is inadequate for modeling the mechanism's bistable behavior. A parameter study in edge width using the large deformation model accounts for discrepancies between predicted and measured forces. The model's utility is further demonstrated by an optimization study that redesigns the mechanism to be less sensitive to the edge width variation introduced in the manufacturing process.
1 November 2024 in Additive Manufacturing
4 August 2023 in Computer Methods in Applied Mechanics and Engineering
4 January 2023 in Journal of Peridynamics and Nonlocal Modeling