A single-chip, bidirectional brain-computer interface (BBCI) enables neuromodulation through simultaneous neural recording and stimulation. This article presents a prototype BBCI application-specified integrated circuit (ASIC) consisting of a 64-channel time-multiplexed recording front-end, an area-optimized four-channel high-voltage compliant stimulator, and electronics to support the concurrent multi-channel stimulus artifact cancellation. Stimulator power generation is integrated on a chip, providing ±11-V compliance from low-voltage supplies with a resonant charge pump. High-frequency (~3 GHz) self-resonant clocking is used to reduce the pumping capacitor area while suppressing the associated switching losses. A 32-tap least mean square (LMS)-based digital adaptive filter achieves 60-dB artifact suppression, enabling simultaneous neural stimulation and recording. The entire chip occupies 4 mm² in a 65-nm low power (LP) process and is powered by 2.5-/1.2-V supplies, dissipating 205 μW in recording and 142 μW in the stimulation and cancellation back-ends. The stimulation output drivers achieve 31% dc-dc efficiency at a maximum output power of 24 mW.
31 December 2019 in IEEE Transactions on Biomedical Circuits and Systems
This article demonstrates a scalable, time-division multiplexed biopotential recording front-end capable of real-time differential- and common-mode artifact suppression. A delta-encoded recording architecture exploits the power spectral density (PSD) characteristics of Electrocorticography (ECoG) recordings, combining an 8-bit ADC, and an 8-bit DAC to achieve 14 bits of dynamic range. The flexibility of the digital feedback architecture is leveraged to time-division multiplex 64 differential input channels onto a shared mixed-signal front-end, reducing channel area by 2x compared to the state-of-the-art. The feedback DAC used for delta-encoding also serves to cancel differential artifacts with an off-chip adaptive loop. Analysis of this architecture and measured silicon performance of a 65 nm CMOS test-chip implementation, both on the bench and in-vivo, are included with this paper.
11 January 2019 in IEEE Journal of Solid-State Circuits
This letter presents a highly digital, technology scalable, and energy-efficient cryptographic-quality true random number generator (TRNG). The proposed architecture presents a balanced approach to TRNG design, relying on a simpler, non-cryptographic quality physical random number generator (phyRNG) combined with energy-efficient integrated post-processing to de-correlate and de-bias the phyRNG bitstream. Operating at a supply voltage (Vdd) of 0.53 V, a 65nm CMOS prototype of the TRNG achieves a peak energy-efficiency of 2.58 pJ/bit. TRNG bitstreams pass all NIST randomness benchmarks over a Vdd range of 0.5–1.05 V across –20–100 ∘C, demonstrating its efficacy and robust operation over a wide Vdd and temperature range.
9 December 2024 in IEEE Transactions on Biomedical Engineering
Photoplethysmography (PPG) has emerged as a highly convenient and non-invasive technique for assessing heart rate and its variability in wearable health monitoring devices. However, a drawback lies in the energy demand of PPG systems which consequently increases the average power consumption of the wearable devices integrated with PPG sensors. In this paper, we present our efforts towards packaging a novel compressed-sensing (CS) based ultra-low power PPG application-specific integrated circuit (ASIC) into a wearable device and testing it through a preclinical human study. The system comprises a custom-designed PPG analog front-end circuit, integrated with a digital back-end to implement CS, a light source-detector pair, and a commercial off-the-shelf microcontroller for Bluetooth Low Energy (BLE) based wireless data transfer. Two circular PCBs, a general-purpose main board containing the microcontroller and a plugin board housing the ASIC interfacing components, fit into a wristband form factor. This modular architecture of the wristband platform allows for the incorporation of other environmental sensors for future correlated sensing studies between health and the environment. The PPG ASIC consumes 172 $\bm {\mu }$ W power to extract heart rate from the sparse PPG signal whereas the whole system consumes 1.66 mW power for continuous streaming of heart rate data over the BLE radio which can be further duty cycled. The preclinical trial of the platform demonstrated its efficacy in assessing accurate heart rate in comparison to commercial PPG and electrocardiography systems. This work presents the first-ever demonstration of a wearable wristband with CS based PPG performed on a chip.
17 September 2019 in IEEE Journal of Solid-State Circuits
Traditional digital systems employ independent loops to control supply voltage (V dd ) and clock frequency (f clk ). A clock regulation loop, for instance, a phase-locked loop (PLL), locks the system clock to a reference clock (REFCLK). Concurrently, a voltage regulation loop sets V dd to a target value under rapidly varying load current or line-side disturbances. Limitations in voltage regulator loop bandwidth result in significant V dd fluctuation, leading to timing slack degradation in digital voltage domains. Maintaining timing slack in the presence of supply noise or temperature (T) variation incurs energy-wasteful V dd guardbands. In this article, we present a unified clock and power (UniCaP) architecture that instantaneously adapts f clk to V dd and T variations, requiring minimal guardbands. UniCaP absorbs V dd control into the clock regulation loop, using it to adjust f clk and lock system clock to REFCLK. UniCaP enables all-digital construction with aggressive V dd guardband reduction and the capability for on-the-fly dynamic voltage and frequency scaling (DVFS) events. We deployed the UniCaP architecture on a 65-nm buck converter test chip powering a 0.6-1.0-V Cortex-M0 microprocessor with autonomous transition between continuous and discontinuous conduction modes (CCM/DCM) in order to support a wide load current range. The UniCaP test chip demonstrates 82% average Vdd guardband reduction, without any performance loss from adaptive clocking, and temperature margin reductions of 40-55 mV.