This article describes an application of Non-linear Model Predictive Control algorithms on energy efficient control of fully electric vehicle cabin temperature and air quality. Since fully electric vehicles can not utilize waste heat from a powertrain (or there is not enough waste heat) as ICE vehicles do, it is necessary to employ advanced control approaches (especially for cabin heating) due to the possible mileage lost by using energy from the batteries for cabin conditioning. The basic idea behind this is to avoid the heat losses caused by excessive air exchange and to ensure a satisfactory air quality in combination with a user defined temperature. The Non-linear Model Predictive control algorithms were successfully implemented into an Infineon AURIX Tricore microcontroller and tested within a Processor in the Loop simulation.
This paper introduces three methods of an auto-motive refrigeration compressor power measurement and computation. All the methods are evaluated on a test bench with convenient results. The model-based method in combination with the condenser model and condenser fan characteristic is then used for assembly of an optimization problem, which has been solved to find an optimal condenser fan speed for a combination of compressor speed and ambient temperature. This method of condensing pressure (temperature) control can be useful to achieve minimal power consumption of the refrigeration system for electric vehicles and even in other application areas with variable speed compressors and condenser fans.
This paper deals with maximizing coefficient of performance (COP) of R744 automotive heat pump. A high-side pressure variation is possible during transcritical operation employing low pressure receiver and electronic expansion valve (EXV). The optimal high-side pressure is then determined using Fibonacci search method. This approach is one of possible methods of online high-side pressure control and it has significant advantages over the offline methods. Employing this innovative method of R744 heat pump optimization a disadvantage of low COP during transcritical operation can be eliminated. Thus further usage of R744 refrigerant in automotive applications will be possible without any negative impact on energy consumption. As a result, this work can help with development of more environmental friendly vehicles.
This paper deals with coefficient of performance (COP) maximization of automotive R744 heat pump using Nelder-Mead simplex method. The COP maximum is searched using high-side pressure adjustment, what is possible and necessary during transcritical operation. Selected approach allows efficient heat pump operation, fast COP maximum localization, minimum number of needed actuator changes and resistance to heat pump parameters variation.