21 January 2022 in The International Journal of Advanced Manufacturing Technology
1 April 2022 in Optics Communications
23 November 2022 in The International Journal of Advanced Manufacturing Technology
8 November 2023 in Journal of Applied Physics
In water-guided laser technology, the stability of water jets is crucial to ensure the efficient transmission of laser energy. However, the thermal effects generated when high-power lasers are coupled with water jets are bound to impact the stability of the water jets, thus becoming a critical issue that restricts the development of high-power water-guided laser technology. In addressing this issue, this paper establishes a temperature model for coupling high-power lasers with water jets. Subsequently, with validation of the model's effectiveness through experimental data, simulations are conducted to analyze the temperature distribution within the water jet. During the simulation process, lasers with different parameters were coupled with water jets to analyze the temperature variation law of the water jets. Additionally, the maximum laser power coupled with water jets of different lengths was solved. Based on the calculated temperature values of the water jet, simulate the evolution of its profile over time when it has an initial temperature gradient. Simultaneously, perform a three-dimensional reconstruction of the obtained perturbed profile and conduct ray tracing to analyze the laser's transmission losses within the perturbed profile. Finally, high-speed cameras are utilized to capture the profile of the water jet, validating the laser-induced fragmentation behavior in the water jet. The research findings will provide a significant reference value for selecting laser parameters and controlling thermal effects in water-guided high-power technology.
22 January 2024 in Journal of Laser Applications
To investigate the interaction mechanism between a laser, water jet, and substrate, a model is developed to simulate the temperature field evolution and removal process during water jet-guided laser (WJGL) cutting of silicon. The model accounted for the temperature-dependent properties of the silicon absorption coefficient, as well as the physical processes of solid-liquid-gas phase change. A three-dimensional finite volume model of WJGL cutting of silicon is created, incorporating laser energy input, water jet impact-cooling, and silicon phase transition and removal. The volume of fluid (VOF) method is employed to trace the interphase interface and obtain the groove shape. The validity of the model is verified by comparing simulation results with experimental data. The simulation results show that the groove cross section is characterized by a “V” shape. The groove depth nonlinearly increases from 52 to 385 μm with an increasing number of cuts. Additionally, the residual temperature of the silicon substrate rises from 837 to 1345 K as the number of scans increases from 1 to 10. The findings offer valuable insights into WJGL cutting research, specifically shedding light on the intricate details of the laser-water jet-substrate interaction mechanism.
23 January 2024 in Applied Physics A