24 May 2022 in Journal of Cleaner Production
23 January 2024 in Applied Physics A
22 January 2024 in Journal of Laser Applications
To investigate the interaction mechanism between a laser, water jet, and substrate, a model is developed to simulate the temperature field evolution and removal process during water jet-guided laser (WJGL) cutting of silicon. The model accounted for the temperature-dependent properties of the silicon absorption coefficient, as well as the physical processes of solid-liquid-gas phase change. A three-dimensional finite volume model of WJGL cutting of silicon is created, incorporating laser energy input, water jet impact-cooling, and silicon phase transition and removal. The volume of fluid (VOF) method is employed to trace the interphase interface and obtain the groove shape. The validity of the model is verified by comparing simulation results with experimental data. The simulation results show that the groove cross section is characterized by a “V” shape. The groove depth nonlinearly increases from 52 to 385 μm with an increasing number of cuts. Additionally, the residual temperature of the silicon substrate rises from 837 to 1345 K as the number of scans increases from 1 to 10. The findings offer valuable insights into WJGL cutting research, specifically shedding light on the intricate details of the laser-water jet-substrate interaction mechanism.
16 April 2024 in The International Journal of Advanced Manufacturing Technology
10 December 2023 in Journal of Reinforced Plastics and Composites
Water-jet-assisted laser processing suffers from energy losses, while gas-assisted laser processing encounters insufficient cooling. To better address these issues, this paper proposes a method of water-gas jet-assisted laser processing for carbon fiber-reinforced polymer (CFRP) materials to explore the thermal damage control effect in laser processing of CFRP. The method of water-air jet-assisted laser processing involves the formation of a water layer by the impact of a water jet on the workpiece, followed by the addition of auxiliary gas above the water layer to impact it. This method effectively suppresses water splashing and debris interference, thus enhancing the quality of CFRP processing. The present research investigates the effects of air pressure, water pressure, gas jet-target distance, and gas nozzle diameter on CFRP processing quality through single-factor experiments, which are subsequently optimized using orthogonal experiments. Furthermore, a three-dimensional model for water-gas jet-assisted laser processing was established in this study, and the flow field was analyzed using computational fluid dynamics software, aiming to explore methods for optimizing the flow field. Experimental and simulation results demonstrate that the water-air jet-assisted laser processing technique ensures both the cooling effect of water and minimizes the impact of the water layer on the laser transmission path, thereby facilitating the achievement of thermal balance removal in CFRP.
9 January 2025 in Journal of Laser Applications
The dynamic evolution of cavitation bubbles in underwater wet laser welding significantly influences the laser beam. To mitigate the adverse effects of cavitation bubbles, an ultrasonic-assisted underwater laser wet welding method is proposed. This work reports an experimental study of ultrasonic-assisted underwater laser welding 304 stainless steel at varying welding speeds, different water layer thicknesses, and different ultrasonic powers. Additionally, the high-speed photography method was used to analyze the effect of ultrasound on the movement of cavitation bubbles, and a ray optics finite element model was employed to better understand the impact of cavitation positions on the laser beam. The results indicate that, under identical process parameters, the application of ultrasonic waves controls the movement of cavitation bubbles via acoustic flow. Consequently, the weld seam is more uniform, and the width and depth are increased effectively. In addition, without ultrasonic assistance, the weld seam width and depth decrease with higher welding speeds and decrease with the increase of the water layer thickness. With ultrasonic assistance, the weld seam width decreases while the depth increases at higher welding speeds. The weld seam width and depth increase with the increase of ultrasonic power. The weld width first decreases and then increases as the water layer thickness increases, and the weld seam depth shows a decreasing trend. These indicate that the dynamic evolution of cavitation bubbles has an important impact on the weld width and depth. This study can provide a reference for achieving better weld efficiency and geometry in underwater laser wet welding.