14 November 2024 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
This article presents a 26–32-GHz 6-bit bidirectional passive vector modulation phase shifter (PVM-PS) in 40-nm CMOS for phased array systems. The passive phase shifter comprises a center-tap transformer-based quadrature generator/combiner, two 6-bit X-type attenuators, and a differential Wilkinson power combiner/divider. The symmetric design enables bidirectional signal propagation and offers flexible system configuration. Passive switches are sized to optimize the tradeoff among gain variation, insertion loss, and linearity. The phase shifter implemented in 40 nm covers a range of 360° with 5.625° resolution and the rms phase error is between 0.4° and 1.3°. It exhibits <1-dB magnitude imbalance and <1.2° phase imbalance between forward and reverse propagation modes. Its OP1dB is above −1 dBm across the operation frequency.
24 December 2024 in IEEE Journal of Solid-State Circuits
A wideband reconfigurable quadrature receiver with the range of 5–18-GHz frequency coverage and 100–500-MHz analog baseband bandwidth is proposed in this article. The low-noise front end utilizes a capacitor assisting triple-winding transformer (CTTF) to expand bandwidth and suppress noise. An injection-locked oscillator driven by a delay-locked loop is used to generate the quadrature clocks without using the divider and the associated high-frequency clock. The hybrid baseband filter consisting of passive RLC and active-RC biquad simultaneously achieves high linearity and flexible gain/bandwidth adjustments. The analog baseband circuitry employs a feedforward compensated transconductance amplifier that greatly relaxes the power-bandwidth trade-off. To mitigate the impact of complex and frequency-dependent quadrature error (I–Q mismatch) arising from I-to-Q clock overlap, the receiver applies separate RF- $G_{m}$ to drive I and Q passive mixers. Fabricated in a 28-nm CMOS process, the proposed receiver exhibits a noise figure of 2.1–5.4-dB and 30–72-dB adjustable conversion gain, >20-dBm in-band OIP3, >16-dBm out-of-band OIP3 with a total power consumption of 104–199-mW at 1-V supply.
17 April 2025 in IEEE Transactions on Circuits and Systems I: Regular Papers
This paper presents a design-oriented analysis for the time-interleaved SAR ADC that quantifies different sources of imperfections to provide a unified design framework. This includes both single-channel and interleaving imperfections. A prototype time-interleaved ADC is designed and fabricated in a 28 nm CMOS process to validate the effectiveness of the theory. With one-time foreground timing skew and offset compensation, the 3.5 GS/s 11-bit time-interleaved SAR ADC achieves 55.6 dB SNDR at low input frequency and 54.3 dB SNDR at Nyquist frequency while dissipating 66.0 mW at 1 V supply including 14.8 mW clock buffer power.
8 December 2025 in IEEE Transactions on Circuits and Systems II: Express Briefs
A fully digital background time-skew calibration technique for time-interleaved analog-to-digital converters (TI-ADCs) is presented in this brief. Interleaving errors due to time-skew are modeled as additive error terms through first-order Taylor expansion and are corrected by finite impulse response (FIR) differentiators. Computational complexity is substantially reduced by leveraging matrix binary decomposition technique. Furthermore, the increment-based adaption technique is employed to accelerate the convergence of coefficients estimation while maintaining low steady-state error. Both theoretical analysis and experimental results demonstrate that the proposed approach offers lower computational complexity and faster convergence compared to conventional methods. The proposed method is applied to an 11-bit, 3.5 GS/s, 8-channel time-interleaved SAR ADC fabricated in 28-nm CMOS. Measurement results show that the proposed calibration method improves the SFDR by 16.66 dB and the SNDR by 10.45 dB at low frequency, and by 20.6 dB and 17.4 dB at the Nyquist frequency, respectively.
3 October 2025 in IEEE Journal of Solid-State Circuits
The injection-locked ring oscillator is being widely used in high-speed wireline transceivers to generate multi-phase clocks. The fundamental limit lies in the tradeoff between the number of output phases and the maximum operation frequency for a given technology node. This work proposes the dual-feedback ring oscillator that breaks the tradeoff by completely decoupling the frequency generation feedback loop and phase alignment feedback loop. Theoretical frames are provided with simulation verification. The proposed dual-feedback ring oscillator is adopted in an eight-phase clock generation circuit that injection locks the ring oscillator with a delay-locked loop (DLL). The prototype fabricated in a 28-nm CMOS process achieves 8–28-GHz frequency range with <3° phase error and <38-fs integrated jitter. The highest operation frequency is improved by ~40% compared to state-of-the-art.
1 January 2026 in IEEE Transactions on Circuits and Systems II: Express Briefs