Yazhou Dong

Yazhou Dong

Auto-generated profile, based on publicly available information

Yazhou Dong

School of Electronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu, China

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 July 2023 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
YDYazhou Dong
Yazhou Dong
HLHuajie Liang
Huajie Liang
SLShixiong Liang
Shixiong Liang
HZHongji Zhou
Hongji Zhou
JYJianghua Yu
Jianghua Yu
YZYaxin Zhang
Yaxin Zhang
Compared to GaAs Schottky barrier diode (SBD), GaN SBD exhibits higher power handling capabilities and superior heat dissipation properties when used on high thermal conductivity SiC substrates. However, high-power continuous wave (CW) input causes a temperature rise and reduces performance in GaN-based frequency doublers. This article proposes a solution considering the thermal resistance of the SBD and using AlN as the dielectric substrate under high-power input. Furthermore, extending the metal to the ground minimizes assembly errors and guarantees consistency between simulation and experiment. The experimental results reveal the significant potential of GaN materials. With an input power of 646 mW in CW mode, a remarkable output power of 101.1 mW was achieved with only four anodes. Furthermore, at an input power of 440 mW, the frequency conversion efficiency peaked at 19% at 141 GHz. This notable achievement surpasses the performance of the existing GaN-based doublers and expands the operational capabilities to CW operation.

4 June 2024 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
TZTianchi Zhou
Tianchi Zhou
YDYazhou Dong
Yazhou Dong
JZJun Zhou
Jun Zhou
HZHongji Zhou
Hongji Zhou
JZJia Zhang
Jia Zhang
YZYaxin Zhang
Yaxin Zhang
Metal hybrid waveguide couplers, which are crucial passive structures in terahertz (THz) in-phase-quadrature (IQ) mixers, have raised significant attention in the development of high-speed communication systems. Spoof surface plasmon polariton (SSPP) mode, a surface wave transmission mode, possesses excellent characteristics such as localized field enhancement and energy concentration. To further expand the operating bandwidth of THz coupler and improve the balance performance between IQ paths, this article combines the SSPPs’ structure with the waveguide coupler, converts the low-pass characteristics of the traditional SSPPs’ transmission lines and high-pass rectangular waveguide transmission lines into bandpass ones, and proposes an SSPPs’ interdigital coupled quasi-periodic coupler, treating the hybrid waveguide coupler as a quasi-periodic structure, utilizing the transmission mode and dispersion relation of SSPPs to concentrate and enhance the local field strength, thus improving the coupling performance. The proposed structure achieved better amplitude balance performance and expanded the operating bandwidth. An SSPP-coupled hybrid waveguide coupler was designed and fabricated. The simulated amplitude imbalance is less than 0.3 dB and the measured one remains below 0.75 dB across the frequency range of 150–260 GHz, which has a significantly larger bandwidth than the WR-4 standard rectangular waveguide with the working frequency range of 170–260 GHz. The measured phase imbalance is within 2.2 $^{\circ}$ , and the total insertion loss is within 1.3 dB. This novel SSPPs’ coupler proves the feasibility of a promising structural design using bandpass transmission lines in replacement of traditional high-pass transmission lines in metal hybrid waveguide couplers for large-bandwidth and high-performance THz IQ mixing devices.

29 March 2023 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
TZTianchi Zhou
Tianchi Zhou
YDYazhou Dong
Yazhou Dong
SGSen Gong
Sen Gong
SLShixiong Liang
Shixiong Liang
KDKesen Ding
Kesen Ding
YZYaxin Zhang
Yaxin Zhang
High-speed direct modulation devices are of great significance for the development of high-speed communication systems with large bandwidth, miniaturization, and low complexity. However, an increase in the carrier frequency in the sub-terahertz band and above will negatively impact high-performance direct modulation devices due to the large insertion loss and low on–off ratio. Based on the traveling-wave modulation mechanism, this article adopts the zero-phase-difference amplitude modulator design method. More specifically, a 1- $\mu$ m small anode Schottky diode is combined with a Z-type matching structure to form a dual-resonant coupling dynamic tunable unit. Interunit coupling is found to further improve the on–off ratio. In this way, high-speed dynamic modulation is performed for the transmission traveling-wave amplitude with low insertion loss and a high on–off ratio. On this basis, a 0.14-THz on–off keying (OOK) high-speed traveling-wave modulator is proposed, and our results showed that a on–off ratio of 25.4 dB could be achieved at the zero-phase-difference point by only using two dynamic structural units. Meanwhile, the control voltage could be adjusted to achieve high-speed modulation with a phase difference of only 3.66 $^\circ$ during the entire control voltage transition, a data rate of 24 Gb/s, and 33.99% sidebands occupation.

15 September 2022 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
YDYazhou Dong
Yazhou Dong
HLHuajie Liang
Huajie Liang
SLShixiong Liang
Shixiong Liang
WKWei Kou
Wei Kou
XHXiaolin Hao
Xiaolin Hao
YZYaxin Zhang
Yaxin Zhang
As the operating frequency increases, the output power of traditional frequency doublers becomes too low to drive the next stage devices. To address this problem, a double-layer meta-chip circuit consisting of a symmetrical split ring (SSR) structure with a doubler circuit is presented. It combines the transmission mode in the rectangular waveguide with the resonance mode in the meta structure. The meta structure improves the coupling efficiency between the diode and electromagnetic energy, strengthens the electric field at the diode, and ultimately enhances the efficiency of the frequency doubler at low input power. From 160–180 GHz, the experiments show that the frequency doubler with SSR achieved a peak efficiency of 22.4% with an output power of 10.6 mW. Its performance of maximum output power is 45.2% better than the traditional structure, which provides an important technical approach to achieve higher efficiency at low input power.

10 January 2024 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
KDKesen Ding
Kesen Ding
YAYu Ao
Yu Ao
HFHailong Fang
Hailong Fang
CBChunyang Bi
Chunyang Bi
LCLiyu Cheng
Liyu Cheng
YZYaxin Zhang
Yaxin Zhang
In this letter, a terahertz ultra wideband high-speed on-chip modulator based on coupling resonance was proposed. By nesting multiple diodes in the coplanar waveguide to form multiple composite modulation units, the equivalent physical state of meta-units is controlled by external voltage signal, and then control the electromagnetic resonance characteristics of the modulation units to achieve high-speed broadband modulation of terahertz waves. This modulation mechanism simplifies the resonant structure, suppresses the parasitic parameters and improves the modulation rate of the existing terahertz external modulator. The bandwidth is expanded through cascade coupling resonance, thus realizing ultra-wideband amplitude modulation of terahertz waves transmitted in coplanar waveguides. The experimental results show that the high-speed ultra-broadband modulation of terahertz waves is achieved at 110 GHz-160 GHz with a maximum modulation depth of 15dB (97%) and a maximum modulation rate of 30 Gbps, providing a promising prospect for the development and application of the integrated terahertz direct modulation technology.

11 February 2025 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
YDYazhou Dong
Yazhou Dong
JZJun Zhou
Jun Zhou
HLHuajie Liang
Huajie Liang
TZTianchi Zhou
Tianchi Zhou
SZShuhan Zhou
Shuhan Zhou
YZYaxin Zhang
Yaxin Zhang
Compared with GaAs Schottky barrier diodes (SBDs), GaN SBDs offer a remarkable increase in the power capacity. However, GaN-based doublers face limitations in their continuous-wave output power due to challenges in the thermal dissipation. To address this issue, this article proposes a novel thermal resistance calculation model tailored to guide the development of devices with minimized thermal resistance and to streamline the procedure for extracting the anode temperature. This model is also suitable for a broad range of compound semiconductor processes. Based on this, the device’s thermal resistance structure was optimized, facilitated by the adoption of the GaN/SiC monolithic integration process. Subsequently, prototypes centered at 140, 170, and 220 GHz were tested. All sources represent a breakthrough in maximum output power without power synthesis technology, marking a state-of-the-art accomplishment. The measured room-temperature output power levels are as follows: 352 mW for the 140-GHz doubler, 350 mW for the 170-GHz doubler, and 109 mW for the 220-GHz doubler (higher power amplifiers are missing).