18 June 2021 in IEEE Transactions on Energy Conversion
The cascaded structure is generally adopted in the permanent magnet synchronous motor drive system, however, the speed dynamic performance is always deteriorated due to the limited bandwidth of speed loop when the linear controller is employed. Therefore, in order to realize quick dynamic response, the speed loop is eliminated in the non-cascaded control structure, and the non-cascaded model-free predictive speed control is proposed in this paper. First, the ultra-local model of SMPMSM drive system is established with a compound variable which implicitly unifies the speed and current of different time scales, and then the Lyapunov function is designed to derive control law and generate the inverter reference voltage automatically by considering the delay of digital control. Moreover, the inverter reference voltage is further modified under voltage and current constraints to guarantee system safety and reliable operation. Finally, the feasibility and validity of the proposed method has been verified by system simulation and experimental researches.
23 May 2022 in IEEE Transactions on Power Electronics
Conventionally, the benchmark proportional-integral control method is implemented to realize power factor correction and output voltage regulation of single-phase ac/dc converters. However, the performance is deteriorated due to the influence of uncertainties and disturbances, e.g., periodic input voltage and load variation. Concerning this problem, this article proposes a model-free control (MFC) strategy of single-phase ac/dc converters. The MFC principle is revisited and a frequency response analysis is presented for the algebraic estimators of uncertainties and disturbances. Consequently, the closed-loop performance of MFC systems is allowed to be analyzed in frequency domain via classical linear control theory. Based on the theoretical results, the model-free current and voltage control systems are synthesized in detail to achieve control objectives of the converter. Simulation results demonstrate the performance of MFC systems in reference tracking and disturbance rejection. The feasibility and validity of the presented MFC strategy for single-phase boost ac/dc converters is also confirmed experimentally as compared to the benchmark scheme.
17 May 2023 in IEEE Journal of Emerging and Selected Topics in Power Electronics
The surface mounted permanent magnet synchronous motor (SPMSM) is a complex and nonlinear system. Therefore, single control method is difficult to perform well in different operations. For this reason, the direct speed composite control of SPMSM drive system is proposed in this paper. First, the control laws are deduced from the designed sliding mode surface and integral sliding mode surface under non-cascaded structure respectively. On the basis of guaranteeing the system stability, the dynamic weight factor is designed innovatively with speed error to perceive system state and allocate the ratio of two control laws in real time. Accordingly, the proposed composite control can be implemented by dynamic weight factor and make full use of two abovementioned control laws. Furthermore, by establishing ultra-local model of the SPMSM drive system, the nonlinearities, uncertainties and unknown disturbances of the system are estimated together and fed back to the controller, and the system robust improvement can be achieved consequently. At last, system simulation and experimental researches validate that the proposed direct speed composite control realizes smooth transition of two control methods and improves dynamic and steady-state control performance of the system.
5 May 2022 in IEEE Transactions on Energy Conversion
This paper proposes an analytic solution of the optimal voltage vector for model predictive current control, in order to achieve the excellent dynamic and steady-state current performance of surface mounted permanent magnet synchronous motor (SMPMSM). The voltage vector in the stationary reference frame is firstly defined by its phase and amplitude. Through coordinate transformation and the predictive model of SMPMSM drive system, the cost function related with the voltage vector is established. Then it can be transformed into two different forms which are only relevant to the phase or amplitude of voltage vector by trigonometrical substitution. Next, the analytic solution of optimal voltage vector with continuous phase and amplitude is easy to derive by the two different forms of cost function with extremum. The optimal voltage vector is finally synthesized by three-vector method, and the experiments under various operating conditions are implemented to verify the effectiveness of the proposed method.