21 January 2020 in IEEE Access
A modulated model-free predictive control with minimum switching losses (MSL-MMFPC) is proposed to improve the steady-state performance and reduce the switching losses for a permanent magnet synchronous motor (PMSM) drive system. Firstly, two adjacent current vectors are determined based on the predefined first-level cost function, and then, make the current vector at the next control period equal to the reference current vector by modulating the selected current vectors properly. Additionally, in order to keep optimal control performance also in the over-modulation region, a new rotating coordinate frame is used to adjust the optimal voltage vector. Then, the second-level cost function is designed to select the optimal voltage vector sequence, so that the switching of a VSI leg does not happen during the phase-current maximum, which can reduce the switching losses of the inverter. The simulation and experimental results verify the effectiveness of the proposed control method.
7 August 2023 in IEEE Journal of Emerging and Selected Topics in Power Electronics
The design of the weighting factor in model predictive torque control (MPTC) is a tricky and time-consuming problem. To obtain the optimal weighting factor without the tedious tuning process, a finite control set MPTC based on equivalent weighting factor is proposed for surface-mounted permanent magnet synchronous motor (SMPMSM) drive system. The torque-flux error plane is first established, and the Pareto error points are selected from those corresponding to each voltage vector. By analyzing the Pareto error points, the mapping relationship between the weighting factors and the voltage vectors that minimizes the cost function is established. Then, the entire weighting factor interval is divided into several equivalent weighting factor intervals, and arbitrary value in each equivalent weighting factor interval corresponds to a same voltage vector. Therefore, each equivalent weighting factor interval can be substituted for arbitrary value in that interval, the infinite weighting factors are simplified to several equivalent ones. Finally, an evaluation criterion is designed to select the optimal weighting factor. As a result, the tedious tuning process is avoided, and the optimal weighting factor is achieved under different operating conditions. The experimental results show that the proposed method has superior performance of torque and flux.
3 November 2022 in IEEE Journal of Emerging and Selected Topics in Power Electronics
To achieve the global optimization of stator current and inverter switching frequency, a double-objective global optimal model-free predictive control is proposed based on discrete space vector modulation for surface mounted permanent magnet synchronous motor (SMPMSM) drive system. First, the double-objective invalid optimization area of the conventional DSVM-based finite control set model predictive control is revealed, and the reason is analyzed that the global optimal voltage vector cannot achieved. Then, according to the distribution of the double-objective invalid optimization area, the voltage hexagon is divided into three subareas. In each subarea, the candidate voltage vector with the best current control performance (BC-CVV) is obtained. Moreover, the inverter switching number of the three BC-CVVs is used as a criterion, and the number of the voltage vectors evaluated online is significantly reduced. As a result, the double-objective global optimal voltage vector is achieved without enumerating all the feasible voltage vectors. Finally, experiments under different operating conditions are implemented and the effectiveness of the proposed method is confirmed.
16 May 2024 in IEEE Journal of Emerging and Selected Topics in Power Electronics
The torque and stator flux control performance of surface permanent magnet synchronous motor (SPMSM) drives based on finite control set model predictive torque control (FCS-MPTC) can be improved by discrete space vector modulation (DSVM) technique. However, enumerating all candidate voltage vectors (CVVs) during the prediction and evaluation process significantly increases the computational burden for DSVM-MPTC algorithm. Therefore, this article proposes a zero-suboptimal model predictive torque control (ZS-MPTC) to reduce the computational burden and realize the dual-objective optimal control of torque and stator flux for SPMSM drives based on DSVM. In this method, the enumeration number of CVVs is adjusted according to the real-time change of reference voltage vector under different operating conditions. Compared with traditional DSVM-MPTC, in which 38 CVVs need to be enumerated in the cost function, only 2, 4 or 6 CVVs are evaluated to determine the global optimal voltage vector based on the different amplitudes of reference voltage vector in the proposed method. Compared with existing methods, the proposed method has the characteristic of high search efficiency of global optimal voltage vector. In addition, the dynamic and steady-state zero-suboptimal control of dual-objective DSVM-MPTC is realized. The experimental results validate the effectiveness of the proposed method.
28 March 2022 in BioResources