We report on the evaluation of cell performances of the bifacial passivated emitter and rear cell (PERC) structures for both p- and n-type Cz-Si. We compared four conditions: Front-side illumination, with and without the rear metal contact, rear-side illumination, and double-side illumination. Furthermore, the effects of the rear contact area and the rear passivation surface recombination velocity (SRV) were evaluated. The numerical simulations were based on the experimental results of the p-type bifacial PERC performance, and we attempted to determine optimized cell designs for each condition. The results showed that the rear passivation SRV determined the bulk condition: An n-type bulk resistivity of 1 $\Omega$ -cm and p-type bulk resistivity with BO-cluster deactivation of 0.5 $\Omega$ -cm were suitable for a smaller and larger SRV, respectively.
16 September 2020 in IEEE Journal of Photovoltaics
The diffusion profiles of the front floating emitter (FFE) and front surface field (FSF) in a bifacial interdigitated back contact solar cell are optimized. The optimization results revealed that the FFE and FSF schemes are beneficial for enhancing the cell performance at the front and rear sides, respectively. Lighter doping is particularly better for the FSF scheme, and the FFE scheme requires a large diffusion depth for improving the performance. Increasing the area of the rear emitter boosts the performance of the cell, and an FFE scheme with 90 $\%$ rear emitter area is found to be the best design. Quantum efficiency mapping demonstrated that the FFE scheme suppresses the loss at the back surface field region, thereby enhancing the performance of the total cell. The FSF scheme improves the quantum efficiency for the entire region by enhancing the carrier transport in the vertical direction. Furthermore, loss analysis revealed that the FFE scheme suppresses the recombination loss at the maximum power point, which is an important advantage over the FSF scheme.
Carbapenem-resistant Enterobacterales and carbapenem-resistant Pseudomonas aeruginosa strains pose a global threat. Antibacterial activity of imipenem/relebactam (IMR) against clinical isolates of these bacteria from several global regions has been shown; however, as yet there are no reports on Japanese isolates.
15 June 2003 in Japanese Journal of Applied Physics
Silicon self-diffusion coefficients were measured in intrinsic and extrinsic silicon from 870 to 1070°C using isotopically pure 30Si/natural Si heterostructures. 30Si diffusion profiles are determined by secondary ion mass spectrometry. The temperature dependence of intrinsic diffusion coefficient in bulk Si is obtained. Comparing it in heavily As- or B-doped Si, it is found that the fractional contribution of Si self-diffusion varies with diffusion temperatures and that different type of point defect (self-interstitial or vacancy) is supersaturated by the Fermi level effect in As- or B-doped silicon.
29 March 2022 in IEEE Transactions on Electron Devices
In this study, we propose an advanced tunnel oxide passivated contact (TOPCon) solar cell structure for bifacial usage. The proposed structure, named advanced industrial TOPCon (Ai-TOPCon), adopts rear-side local carrier-selective contacts to avoid rear-side light-absorption loss. Ai-TOPCon features larger rear-side light currents and improves the power density by approximately 0.28 mW/cm 2 for bifacial usage in a 20% albedo scenario. Several types of Ai-TOPCon and industrial TOPCon (i-TOPCon) are evaluated, and the optimization of the structure resulted in a power density of 28.73 mW/cm 2 . Loss analysis revealed that the reduced Auger recombination volume was the main factor contributing to the improvement of cell performance, and the light-absorption problem was solved by reducing the rear-side heavy-doped region.