Although the porosity in Al-SiC metal matrix composites (MMC) can be diminished; its existence is unavoidable. The purpose of this work is to study the effect of porosity on Young’s modulus of SiC reinforced aluminum matrix composites. Finite element analysis is performed based on the unit cell and the representative volume element approaches. The reliability of the models is validated by comparing the numerical predictions against several experimental data ranging in low- and high-volume fractions and good agreement is found. It is found that despite the stress transfer from the soft matrix to the reinforcement remains effective in the presence of pores, there is a drop in the stress gathering capability of the particles and thus, the resulting effective elastic modulus of composite decreases. The elastic property of the composite is more sensitive to pores away the reinforcement. It is confirmed, qualitatively, that the experimentally reported in the literature decrease in the elastic modulus is caused by the presence of pores.
The thermal performance of closed-cell foams as an insulation device depends on the thermal conductivity. In these systems, the heat transfer mode associated with the convective contribution is generally ignored, and studies are based on the thermo-physical properties that emerge from the conductive contribution, while others include a term for radiative transport. The criterion found in the literature for disregarding convective heat flux is the cell diameter; however, the cell size for which convection is effectively suppressed has not been clearly disclosed, and it is variously quoted in the range 3–10 mm. In practice, changes in thermal conductivity are also attributed to the convection heat transfer mode; hence, natural convection in porous materials is worthy of research. This work extends the field of study of conjugate heat transfer (convection and conduction) in cellular materials using microstructure-based finite element analysis. For air-based insulating materials, the criteria to consider natural convection () is met by cavities with sizes of 9.06 mm; however, convection is developed into several cavities despite their sizes being lower than 9.06 mm, hence, the average pore size that can effectively suppress the convective heat transfer is 6.0 mm. The amount of heat transported by convection is about 20% of the heat transported by conduction within the foam in a , which, in turn, produces an increasing average of the conductivity of about 4.5%, with respect to a constant value.
1 July 2016 in Russian Journal of Non-Ferrous Metals
Ductile iron (DI) can acquire various properties with the addition of alloying elements and through heat treatment. In this work, the effects of vanadium and molybdenum on the microstructure and corrosion resistance of DI and austempered ductile iron (ADI) were studied. Corrosion resistance was evaluated by potentiodynamic polarization techniques in 0.5 M H2SO4, 0.5 M NaCl, and 05 M NaOH as electrolyte. The ADI alloyed with vanadium presented anupper ausferritic microstructure consisting of broad ferrite needles, while the combination of vanadium and molybdenum allows obtaining a fine microstructure composed of ausferrite and thin needles of ferrite; this microstructure improves the corrosion resistance in NaCI and NaOH. The DI’s showed corrosion due to the galvanic pair between the graphite nodule and the ferrite; however, a high amount of carbide increases the corrosion resistance in H2SO4.
Magnesium removal process from molten aluminum using particles of silica sand was studied from a hydrodynamic point of view using computational fluid dynamics (CFD). The gas-liquid flow was modeled by a model of the Euler type for both gas and liquid phase transport. Newton´s law of motion was used to describe the subsurface motion of injected solid particles from the calculated flow field in one-way coupling. The kinetics of the transitory reaction was described by using the model proposed by Ohguchi and Robertson for transitory reactions. The contacting method of reaction for silica particles of 75, 210 and 425 µm was established according to its dynamic interaction with the two phases flow. When the particle size was increased, the residence time increased as well; however, the efficiency for the transitory reaction was decreased. The reaction rate simulation showed a good agreement with experimental results reported in the literature.