Sungyoon Kang

Sungyoon Kang

Auto-generated profile, based on publicly available information

Sungyoon Kang

Department of Electrical Engineering, Hanyang University, Ansan, South Korea

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 January 2018 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
SKSungyoon Kang
Sungyoon Kang
MJMoon-Suk Jeon
Moon-Suk Jeon
JKJunghyun Kim
Junghyun Kim
A highly efficient fully integrated 5.15- to 5.85-GHz GaAs HBT differential power amplifier (PA) is implemented for long-term evolution (LTE) handset applications considering LTE licensed-assisted access. A simple and practical output network, based on an on-chip transformer, is proposed to achieve low loss. A neutralization technique to mitigate the parasitic base-collector capacitance is also adopted to improve PA performances. The implemented PA achieved a high gain of 26.6-28.1 dB and saturated power of 30.5-31.1 dBm with a high peak power-added efficiency of 40.4%-44.5% under a continuous-wave signal test across 5.15-5.85 GHz. When tested with 20- and 40-MHz bandwidth quadrature phase-shift keying LTE signals, the PA showed an adjacent channel leakage ratio of -33 dBc up to output powers of 24.1-24.4 and 22.2-22.8 dBm, respectively.

22 June 2012 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
UKUnha Kim
Unha Kim
SKSungyoon Kang
Sungyoon Kang
JWJungrin Woo
Jungrin Woo
YKYoungwoo Kwon
Youngwoo Kwon
JKJunghyun Kim
Junghyun Kim
A new practical reconfigurable output network for a multiband reconfigurable power amplifier (PA) is proposed for universal mobile telecommunications system (UMTS) handset applications. The proposed reconfigurable network can reconfigure the output power and the output path, as well as the frequency. It consists of a power-reconfigurable network, a frequency-reconfigurable network, and a path-selection network. In this paper, its reconfiguration principle is described to extract key design parameters for the reconfigurable PA implementation. To demonstrate the performance of the proposed structure, a 5 mm × 6 mm multiband reconfigurable PA module is developed for UMTS high- and low-frequency band application. The fabricated PA module can cover any three bands out of five popular high- and low-frequency UMTS bands. To enhance the efficiency during low output power operation, the authors' stage-bypass technique is also employed. The fabricated PA module showed adjacent channel leakage ratios better than -39 dBc up to the rated linear output power and power-added efficiencies of higher than 39% at Pout=28 dBm over all the UMTS frequency bands. Efficiency degradation was limited to less than 2% compared to the single-band PA. Measured RF performance of the reconfigurable PA validates the usefulness of the proposed reconfigurable structure for multiband UMTS applications.

12 November 2014 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
SKSungyoon Kang
Sungyoon Kang
UKUnha Kim
Unha Kim
JKJunghyun Kim
Junghyun Kim
Fully-integrated multi-mode multi-band (MMMB) reconfigurable power amplifier (PA) is implemented using single PA-cores for high- and low-frequency bands, respectively. This PA has five output paths and covers quad-band Gaussian Minimum Shift Keying/Enhanced Data Rates for Global Evolution and penta-band Universal Mobile Telecommunications System/Long Term Evolution mode operation with band combination in a small form-factor. To optimize the PA, the proposed structure reconfigures the PA-core cells as well as the interstage/output matching network. When compared with the single-mode single-band dedicated PAs, the fabricated PA showed comparable RF performance for all modes and bands, except for PAE degradations of 3.1% and 1.9% for high- and low-band, respectively, thus validating the usefulness of the proposed structure for MMMB PA applications.

17 October 2023 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
SHSungwoon Hwang
Sungwoon Hwang
JJJooyoung Jeon
Jooyoung Jeon
BSBae sooji
Bae sooji
BYByeongcheol Yoon
Byeongcheol Yoon
SKSungyoon Kang
Sungyoon Kang
JKJunghyun Kim
Junghyun Kim
This article presents a 5.15–7.125-GHz differential power amplifier (PA) with enhanced linear output power by dynamic cross-coupled capacitors ( $C_{\text{cc}}$ ) for both fifth-generation new radio-unlicensed (5G NR-U) and 802.11ax wireless local area network (WLAN) applications. The proposed dynamic $C_{\text{cc}}$ compensates for nonlinear parameters of transistors and leads to improved linearity in the average output power region. The multicoupled four-way transformer (TF) is also proposed for a high symmetry combining structure to reduce the imbalance of differential PA and for a 30% fractional bandwidth of optimal output matching with a low turn ratio and low insertion losses to implement on a nine-layer printed circuit board applications. The proposed differential PA is implemented in a 2- $\mu\text{m}$ InGaP/GaAs heterojunction bipolar transistor (HBT) process. The PA achieves a gain of 24 dB, a saturated output power of 33.1 dBm, and a power added efficiency (PAE) of 40.4% with a collector voltage of 5.5 V over 5.15–7.125 GHz under a continuous wave (CW) signal. The linearity of the proposed PA is further evaluated with various modulation signal schemes to validate its suitability for NR-U and WLAN applications. The PA with NR 100-MHz cyclic prefix (CP) and discrete Fourier transform (DFT) signal having a peak-to-average power ratio (PAPR) of 11.4 and 8 dB achieves linear output power meeting $-$ 33 dBc of 24.6 and 27 dBm and PAE of 10% and 16.3% in NR evolved universal terrestrial radio access (E-UTRA) adjacent channel leakage ratio (ACLR) condition. The PA also achieves the output power of 19.8 dBm with a PAE of 4.3% (error vector magnitude (EVM) $=$ $-$ 40 dB) under 802.11ax MCS11 80 MHz having a PAPR of 10.7 dB.

1 January 2013
Verified
Conference Paper
Closed access
SKSungyoon Kang
Sungyoon Kang
UKUnha Kim
Unha Kim
YKYoungwoo Kwon
Youngwoo Kwon
JKJunghyun Kim
Junghyun Kim
A practical reconfigurable structure for multi-mode multi-band (MMMB) reconfigurable power amplifier (PA) is proposed for GSM/UMTS handset applications. To overcome not only the frequency difference (MB) but also the power difference (MM) between GSM and UMTS standards, the proposed structure reconfigures the PA core as well as the output matching network. To verify the performance of the proposed structure, a MMMB PA is developed for GSM/EDGE/UMTS low-frequency bands applications. The fabricated MMMB PA showed good RF performance for UMTS as well as GSM/EDGE applications. Efficiency degradation was limited to less than 2% compared to the single-mode single-band PA. Measured RF performance validates the usefulness of the proposed structure for MMMB applications.

1 April 2014 in ETRI Journal
Verified
Journal Article
Open access
PDF file
UKUnha Kim
Unha Kim
SKSungyoon Kang
Sungyoon Kang
JKJunghyun Kim
Junghyun Kim
YKYoungwoo Kwon
Youngwoo Kwon
A fully-integrated penta-band reconfigurable power amplifier (PA) is developed for handset Tx applications. The output structure of the proposed PA is composed of the fixed output matching network, power and frequency reconfigurable networks, and post-PA distribution switches. In this work, a new reconfiguration technique is proposed for a specific band requiring power and frequency reconfiguration simultaneously. The design parameters for the proposed reconfiguration are newly derived and applied to the PA. To reduce the module size, the switches of reconfigurable output networks and post-PA switches are integrated into a single IC using a 0.18 μm silicon-on-insulator CMOS process, and a compact size of 5 mm × 5 mm is thus achieved. The fabricated W-CDMA PA module shows adjacent channel leakage ratios better than −39 dBc up to the rated linear power and power-added efficiencies of higher than around 38% at the maximum linear output power over all the bands. Efficiency degradation is limited to 2.5% to 3% compared to the single-band reference PA.