Disruptions lead to a rapid loss of thermal and magnetic energy and can cause large heat loads, mechanical forces, and the excitation of a beam of relativistic runaway electrons. The operation of tokamaks at high energy and plasma current requires the use of a mitigation system to limit such detrimental effects. Mitigation techniques rely mainly on the injection of a large amount of impurities to radiate the majority of the thermal and magnetic energies. Heat loads and electro-magnetic (EM) forces as well as their toroidal asymmetries can be greatly reduced by such measures. In this paper, a theory is lined out to explain the reduction of the global vertical force based on large toroidal halo currents that keep the current centroid stationary in the midplane. As a consequence, the vertical current moment, which is linked to the EM-force, is reduced. The theory is backed up by experimental observations in shattered pellet injection mitigated vertical displacement event experiments in ASDEX Upgrade (AUG) and JET as well as by 2D simulations with the extended MHD code JOREK. Scans in the boundary heat flux are carried out to estimate the correct scrape-off layer temperature and the influence of the fraction of conducted energy. Finally, predictive simulations for ITER confirm the reduction of the vertical force by the injection of impurities.
28 November 2014 in Plasma Physics and Controlled Fusion
Over previous campaigns, an intense experimental program on advanced tokamak (AT) scenarios, has been carried out at the ASDEX Upgrade tokamak with full-tungsten wall. These discharges have been executed shortly after the boronization of the first wall to reduce the density and the impurity influx. The confinement level of such AT discharges was found to vary considerably, even when discharges with similar, if not identical, engineering parameters were carried out. This work investigates the causes of such confinement variations. Among all plasma quantities analyzed, confinement quality of AT scenarios correlates best with divertor neutral pressure, highlighting the key role of edge and scrape-off layer physics in determining global plasma confinement. In particular, it is found that the main cause of confinement degradation is the reduction of pedestal stability, which is in turn caused by the outward shift of the maximum density gradient position typically observed when the divertor neutral pressure increases. Owing to the low density of AT discharges under analysis, the movement of the maximum density gradient position can be caused entirely by changes in deuterium outgassing from the wall, which is strongly influenced by the boron layer deposited on the plasma-facing components and by the deuterium wall inventory. Finally, the predictive capability of confinement quality with the integrated model IMEP [Luda et al., Nucl. Fusion 60, 036023 (2020)] is tested on these discharges and shows promising results.
Massive material injection has been proposed as a way to mitigate the formation of a beam of relativistic runaway electrons that may result from a disruption in tokamak plasmas. In this paper we analyse runaway generation observed in eleven ASDEX Upgrade discharges where disruption was triggered using massive gas injection. We present numerical simulations in scenarios characteristic of on-axis plasma conditions, constrained by experimental observations, using a description of the runaway dynamics with a self-consistent electric field and temperature evolution in two-dimensional momentum space and zero-dimensional real space. We describe the evolution of the electron distribution function during the disruption, and show that the runaway seed generation is dominated by hot-tail in all of the simulated discharges. We reproduce the observed dependence of the current dissipation rate on the amount of injected argon during the runaway plateau phase. Our simulations also indicate that above a threshold amount of injected argon, the current density after the current quench depends strongly on the argon densities. This trend is not observed in the experiments, which suggests that effects not captured by zero-dimensional kinetic modelling – such as runaway seed transport – are also important.
Rapid inter-discharge simulation and optimization using the RAPTOR code have allowed the development of a reliable and reproducible early heating strategy for an advanced tokamak (AT) scenario on ASDEX Upgrade. Solving for electron heat and current diffusion in RAPTOR with ad-hoc formulas for heat transport and electron cyclotron current drive (ECCD) efficiency is found to robustly recover the coupled dynamics of and q, while maintaining model parameters fixed for all discharges. The pedestal top boundary condition in pre-shot simulations is set by a newly derived scaling law for the electron pressure at ρ = 0.8, using a data set of previous AT discharges. RAPTOR simulations have allowed to develop an understanding of the onset of 3/2 tearing modes, which were observed to have a detrimental impact on confinement when low magnetic shear conditions are present at the rational surface during the high-β phase. Delaying the NBI heating, by a specific time interval found via simulations, has led to avoiding these modes. A non-linear optimization scheme has been applied to optimize the ECCD deposition radii to reach a stationary state with at the beginning of the flat-top phase, while ensuring a non-zero magnetic shear at q = 1.5 throughout the high-β phase, and has been successfully tested in experiment. However, further experiments, aiming for , have highlighted limitations of the present feedforward control approach in the presence of shot-to-shot variations that are not included in the applied model. Application of real-time model-based control is proposed to overcome model-reality mismatches in future work.