This article is devoted to the study of the influence of acoustic environmental impacts on the operation of fiber-optic interferometers and measuring systems that are based on them. A method for reducing this influence by using an acoustically conditioned sound-proofing case for operation in the presence of external impacts in a frequency range of 20 to 20 000 Hz is considered. A mathematical model and the results of its research are presented; the calculated dependence of the degree of reducing the acoustic sensitivity of a fiber-optic interferometer on the degree of acoustic sealing of its case is obtained. An experimental setup and a technique for experimental evaluation of the degree of acoustic sealing when studying the cases of devices were developed.
28 July 2020 in Instruments and Experimental Techniques
The results of theoretical calculations and experimental studies of the characteristics of an acoustic test signal when using an acoustic enclosure of the “open-shield” type are presented. The enrichment of the test acoustic signal spectrum due to the use of the developed enclosure was up to +30 dB in the frequency range of up to 500 Hz and from +4 to +20 dB in the frequency range of 1500–5000 Hz in comparison with the loudspeaker without an enclosure. The effect of room characteristics on the acoustic signal at the measurement point was studied and a method for compensation of this influence was proposed. As a result of applying it, the nonuniformity of the amplitude–frequency response of the acoustic signal at the measurement point decreased from 7 to 1.5 dB and the slopes of its spectral characteristic were eliminated.
Fiber optic components, such as fiber optic interferometers, fiber sensors and fiber lasers have high level of sensitivity to environmental acoustic and vibration noise due to elasto-optical effect and fiber elongation under pressure. For most applications this effect is undesirable and it should be reduced for proper operation of fiber optic system. The proposed method for reducing the fiber components environmental noise sensitivity level is based on the implementation of two-layer protective construction. The experimental test confirmed its effectiveness of undesirable impact suppression at the level from -3.2 to -19 dB relatively to the acoustic sensitivity level of bare optical fiber sample. The effectiveness appeared to be directly proportional to the acoustic pressure level. This fact allows us to implement proposed construction as an acoustic shock absorber or an acoustic filter with external impact level dependent transfert characteristic for sensitive fiber optic components.
Theoretical calculations and an experimental study of the degree of decrease in the acoustic sensitivity of an optical fiber in the frequency range of 20–20 000 Hz inside the cables of...
30 October 2019 in International Journal of Innovative Technology and Exploring Engineering
This work reviews measurement systems applied for static and dynamic detection of object coordinates as well as acquiring information of their position at various distances. The market of measurement systems based on video cameras has been analyzed. Their classification is presented, fields of application are described, advantages and disadvantages are summarized for each type of measurement systems. In addition, it has been revealed that the frequency and extent of measurement errors depend not only on the quality on system components but also on numerous other factors, such as light flare, microvibrations, thermal expansion, etc. The review of measurement systems is necessary for determination of the most efficient method of conversion of video surveillance system into measurement system.