The processes of the excitation of acoustic vibrations and their influence on the optical signals in integrated electro-optic modulators on substrates of lithium niobate have been investigated. The re
Fiber optic components, such as fiber optic interferometers, fiber sensors and fiber lasers have high level of sensitivity to environmental acoustic and vibration noise due to elasto-optical effect and fiber elongation under pressure. For most applications this effect is undesirable and it should be reduced for proper operation of fiber optic system. The proposed method for reducing the fiber components environmental noise sensitivity level is based on the implementation of two-layer protective construction. The experimental test confirmed its effectiveness of undesirable impact suppression at the level from -3.2 to -19 dB relatively to the acoustic sensitivity level of bare optical fiber sample. The effectiveness appeared to be directly proportional to the acoustic pressure level. This fact allows us to implement proposed construction as an acoustic shock absorber or an acoustic filter with external impact level dependent transfert characteristic for sensitive fiber optic components.
12 September 2019 in Lecture Notes in Computer Science
Methods for acoustic desensitization of fiber optic interferometer were studied as applied to the compensation interferometer (CIF) of a fiber optic phase sensor system. Materials with high mechanical loss factor were used for the fiber optic interferometer rack case. Also case acoustic conditioning measures and vibration isolation system based on steel springs were developed. Different types of fiber coating for acoustic desensitization were investigated. The best implementation provided up to 30 times (-29.8 dB) suppression of CIF undesirable acoustic sensitivity level.
Theoretical calculations and an experimental study of the degree of decrease in the acoustic sensitivity of an optical fiber in the frequency range of 20–20 000 Hz inside the cables of...
Operation modes of the optoelectronic oscillator (OEO), based on a phase electrooptic modulator with an acetylene reference cell as a photonic filter, have been investigated. For the wideband phase-to-amplitude demodulation that was observed when the laser wavelength was tuned to one side of the acetylene absorption line, an additional tunable electronic yttrium iron garnet (YIG) filter was introduced to observe single-mode OEO generation. This configuration generated a stable monochromatic signal in the 4–12 GHz frequency range, with phase noise of −122 dBc/Hz at 10 kHz offset from the carrier frequency. In the narrowband demodulation mode (when one optical modulation sideband was tuned to the acetylene absorption line), the quasi-single-mode oscillation could be observed without additional electronic filtering. In this case, the generation frequency was controlled optically by tuning the laser wavelength.