14 June 2022 in IEEE Transactions on Power Electronics
The dynamics of nonresonant dual-active-bridge converter (DABC) are simultaneously affected by the transient modulation strategy and controller design. In general, inappropriate transient modulation strategies can lead to nonzero transient dc offsets in the inductor current and transformer’s magnetizing current, thus introducing excessive trajectory tracking error and time delays between the pulsewidth modulation generator and controller. Consequently, truly optimal transient responses cannot be achieved solely through a high-performance controller, unless the modulation-induced transient dc offsets can be completely eliminated. This article presents a comprehensive review of the optimized transient phase-shift modulation (OTPSM) strategies for single-phase-shift modulated DABC, and derives a novel optimal modulation method referred to as symmetric single-sided OTPSM (SS-OTPSM), which is based on a unified theoretical framework of OTPSM and an additional condition enabling a full elimination of all undesired transient dc offsets. The proposed SS-OTPSM can be easily and cost-effectively implemented in a cycle-by-cycle manner, and inherently compatible with fast controllers. Additionally, in order to more accurately match DABC’s power transfer model under SS-OTPSM, an enhanced model predictive controller (EMPC) is proposed. By a combined use of SS-OTPSM and EMPC, ultrafast and completely dc-offset-free dynamics can be achieved without measuring the inductor current. The effectiveness of the proposed schemes is verified by closed-loop simulation and experimental results.
7 January 2022 in IEEE Transactions on Smart Grid
The increasing penetration of distributed renewable generations has given rise to a novel energy management mechanism, peer-to-peer (P2P) energy trading. The concept of Energy Internet (EI) is proposed as a new energy system framework to facilitate P2P energy trading where all distributed electrical devices are interconnected via energy routers (ERs). A proper market clearing approach is required to coordinate decentralized decision making in P2P market for demand-supply balance and feasible end-to-end energy delivery. In this paper, a decentralized market clearing mechanism considering energy path conflict management is proposed for P2P energy trading in energy local area network (e-LAN). An adjusted conflict-based search (ACBS) algorithm is proposed to deal with the non-convexity of the social welfare maximization problem where the nonconvex problem is transformed into multiple independent convex problems. Considering the privacy protection of participants, a dual decomposition based approach is proposed to solve these convex problems in a decentralized manner where self rationality of each participant can be satisfied by maximizing its personal welfare. In addition, energy path conflicts caused by decentralized optimization is resolved by imposing penalty fee and observing the rule of energy sharing maximization. Numerical simulations are presented to verify the effectiveness of the proposed market clearing approach.
5 January 2023 in Sustainable Energy, Grids and Networks
23 January 2023 in IEEE Transactions on Power Electronics
Three-phase AC-DC converters are more commonly used for high-power applications compared to single-phase converters. For high-power wireless power transfer (WPT) applications, such as wireless electric vehicle chargers, usually a two-stage topology is applied, which consists of a three-phase AC-DC rectifier with power factor correction and a DC-DC converter for WPT. Recently, there are several studies on three-phase single-stage WPT solutions being proposed to reduce power conversion stages, and furtherly increase overall efficiency and reduce system cost. In this paper, an integrated three-phase AC-DC WPT converter topology with active power factor correction is proposed. The count of power semiconductor devices is significantly reduced compared to state-of-the-art three-phase single-stage topologies. Moreover, three transmitter coils are used to enhance the system power capacity. Topology description, operation analysis, control method, power loss analysis, and reference design guideline of the proposed topology are presented in detail. Finally, a laboratory prototype is built and evaluated. The functionalities, performances, and advantages are demonstrated by the corresponding experimental results.
24 December 2021 in IEEE Transactions on Power Electronics
Dual-active-bridge series-resonant converter (DABSRC) is increasingly used in many emerging power electronics applications requiring fast dynamic responses. However, under conventional transient phase-shift modulation strategy, DABSRC generally suffers from large-amplitude transient oscillations when its phase-shift angle is changed abruptly by a high-gain controller. These oscillations occur at the beat frequency, which results from the interaction between the switching-frequency and resonant-frequency components in the series-resonant tank during transient states. Besides incurring high voltage and current stresses on the power-stage devices, these transient oscillations also span many switching cycles between the original and new steady states and cause perturbations to the output voltage of DABSRC, thereby degrading its dynamic performance and output voltage quality. To mitigate these problems, a new transient modulation strategy, known as trajectory-switching modulation (TSM), is proposed for achieving an accurate and computationally efficient trajectory planning of the resonant voltages and currents of DABSRC during transient states, and its basic operation is to govern the transient switching patterns of the gating signals according to a simple set of closed-form equations. The proposed TSM strategy can guarantee convergence to the next new steady state within about one switching cycle and avoid needing costly sensors and complex computation for implementation, and it is inherently compatible with high-gain controllers for realizing oscillation-free fast dynamic responses.
14 April 2023 in IEEE Transactions on Power Electronics
Given the wide-range applications of bidirectional dual-active-bridge series-resonant converter (DABSRC), its complex nonlinear dynamic behavior is an interesting phenomenon that deserves attention of power electronics engineers. It is observed that if the control variables (i.e., phase-shift angles) are directly updated through conventional transient modulation, large-amplitude transient oscillations and dc offsets will be induced in the high-frequency-link voltages and currents during transient stage, which can ultimately degrade the converter's waveform quality significantly. The relatively few prior works in studying the transient oscillatory behavior of DABSRC have only focused on single-phase-shift modulation. In this article, a new transient modulation method referred to as generalized trajectory-switching modulation (GTSM) is first proposed for enhancing the transient performance of multiphase-shift modulated DABSRC. GTSM can simultaneously mitigate the problems of transient oscillations and dc offsets regardless of operation modes and power-flow directions, thus always ensuring safe transient operation. It also enables the resonant voltages and currents as well as magnetizing current to seamlessly reach the desired new steady-state values swiftly. Finally, the said theoretical claims are verified experimentally under both open loop and closed loop with model predictive control, and the influence of deviations from nominal resonant tank's parameters on GTSM is also considered.