1 May 2023 in IEEE Transactions on Aerospace and Electronic Systems
Automotive radar is mandated to provide high accuracy direction of arrival (DOA) estimation for safe driving, while remaining a low cost device for feasible mass production. Sparse multiple input multiple output (MIMO) arrays emerge as a primary candidate to meet these requirements. As DOA estimation accuracy is a main indicator of tracking performance, Cramer Rao Bound (CRB) is chosen as the goodness measurement for sparse MIMO array optimization, but its application requires prior information of the road environment. We propose a cognitive sparse MIMO array automotive radar, which “perceives” the road environment via automotive sensing supplemented by co-existed communication from roadside unit to vehicle (R2V). This information is used for co-designing a sparse MIMO array for enhanced automotive sensing and vehicle to roadside unit (V2R) communication. Note that both static RSU and dynamic RSU are usually deployed in Internet of Vehicles (IoV), which can provide continuous transmission coverage and permanent connectivity. The bi-directional communications are integrated into the automotive radar. This is achieved by joint transmit waveform design with spectral nulls for communications and with shared sparse MIMO array co-design for both sensing and high quality V2R communications. Simulation results validate the enhanced automotive sensing performance assisted by the integrated bi-directional communications in the cycle of cognitive-driven optimization.
6 May 2024 in IEEE Journal of Selected Topics in Signal Processing
With the deployment of extremely large-scale array (XL-array) operating at the high frequency bands in future wireless systems, integrated sensing and communication (ISAC) is expected to function in the electromagnetic near-field region with a potential distance of hundreds of meters. Also, a wide signal bandwidth is employed to benefit both communication capacity and sensing resolution. However, most existing works assume a far-field narrowband model, which has prohibited their practical applications in future ISAC systems. In this paper, we propose a near-field wideband ISAC framework for concurrent multi-user downlink communications and multi-target localization. In particular, the expression of Cramer Rao Bound (CRB) of direction-of-arrival (DOA) and distance estimations for sensing multiple wideband sources is derived, which is minimized subject to the guaranteed communication quality of service (QoS) for each user. Based on the proposed ISAC framework, sparse transceiver array and the precoding matrix are jointly optimized to reduce mutual coupling and system overhead. The problem is relaxed to a convex optimization and solved iteratively. Simulation results demonstrate that the proposed wideband near-field ISAC framework can well support both modalities and that the sparse transceiver improves the sensing accuracy without sacrificing the communication performance.
13 March 2023 in IEEE Transactions on Signal Processing
Reinforcement learning (RL) based approaches in massive multiple input multiple output (mMIMO) arrays allow target detection in unknown environments. However, there are two main drawbacks hindering the practical application of these approaches: (i) poor detection performance for weak targets, and (ii) mismatch between high system overhead and single functionality. In light of this, we propose a dual-functional mMIMO (DF-mMIMO) system for multi-target detection with embedded communication in this work. First, we improve the RL based multi-target detection algorithm in both “action” and “reward” steps, by adding an omni-directional detection pulse in the action step and optimizing the reward mechanism in the reward step, so greatly improving the detection probability of weak targets in strong clutter. To achieve the dual modalities, communication information is embedded into the radar transmit waveform via complex beampattern modulation. In particular, we propose a low computational complexity two-step beamformer design method. First, the transmit waveform covariance matrix is designed via convex optimization, and then the beamforming weight matrix is determined according to closed-form formulas. Extensive simulation results demonstrate that the proposed DF-mMIMO system exhibits excellent target detection capability in a scenario where both strong and weak targets co-exist with downlink communications.
19 September 2022 in IEEE Transactions on Aerospace and Electronic Systems
Beamformers employ an array of antenna elements to collect the electromagnetic wave in spatial domain and filter the corrupted signal in either the element-space or the beam-space. The spatial filtering performance of both element-space and beam-space beamformers is jointly determined by two key factors, beamformer geometry and excitation weights. In this work, we propose a cognitive sparse beamformer, which is capable of swiftly adapting entwined beamformer geometry and excitation weights according to the environmental dynamics through a “perception-action” cycle. In the “perception” step, situational information is extracted from the collected real-time data and the sparse beamformer is updated in the “action” step via a regularized switching network, which divides the large array into groups and one antenna or beam is replaced with other candidates in the same group in the metric of array gain (AG) during each iteration. To circumvent the prohibitive computations resulted from matrix inversion accompanying with each update, closed-form formulas are derived to quantify the AG variation, thus facilitating efficient on-line beamformer reconfiguration. Extensive simulations show the effectiveness of the proposed cognitive sparse beamformer design method.
20 March 2025 in IEEE Signal Processing Magazine
Integrated sensing and communications (ISAC) is a promising technology in solving the exacerbated spectrum congestion problem. Future developments of ISAC are expected to provide high-data-rate communications and high-resolution sensing, which demand a large frequency bandwidth and a large-scale (XL) antenna array. This has a two-fold consequence. The electromagnetic (EM) properties change from far-field uniform planar wave (UPW) to near-field uniform spherical wave (USW) propagation, and the waveform must now follow the wideband signal model in lieu of the commonly assumed narrow-band signal structure. The consideration of near-field wideband ISAC has recently prompted a reevaluation of the design techniques, including channel modeling and parameter estimation as well as precoding technologies. In this article, we review the principles of near-field wideband sensing and communications and describe the progress made in devising suitable precoding techniques. Various approaches to ISAC system design, including fully digital and hybrid analog‒digital precoders, are discussed along with their respective benefits and limitations. The efficacy of the design is judged by the achievable accuracy in target range and angular direction estimates, the power focusing, and the communication quality of service (QoS). We provide at the end a perspective on possible future research and trends in this area.
16 September 2025 in IEEE Transactions on Aerospace and Electronic Systems
Integrated sensing and communications (ISAC) has been envisioned as a pivotal technology in solving the exacerbated spectrum congestion problem. Meanwhile, intelligent reflective surface (IRS) presents a promising avenue for enhancing both communications and sensing in severe obstruction scenarios, such as dense urban area. In this paper, we propose a reinforcement learning (RL)-based IRS-assisted ISAC design that enables simultaneous multi-user downlink communications and multi-target sensing via optimizing the IRS reflection coefficients in unknown high-obstruction scenarios. In order to facilitate the IRS-assisted ISAC design, we first introduce a two-phase method that can achieve precise channel estimation with a small number of pilot signals. Subsequently, we employ the RL to co-design the dual-functional IRS, striving for an optimal performance balance between communications and sensing in unknown environments. Specifically, to address the non-convex problems arising from the RL training, we propose to design the Gramian matrix first, followed by matrix decomposition to obtain the optimal IRS reflection coefficients. Extensive simulations have demonstrated that the two-phase method can accurately estimate the channel, and the IRS-assisted ISAC designed via RL exhibits an excellent dual-functional performance in the unknown environment.