Photoelectrochemical (PEC) systems capable of bipolar photocurrent switching offer advanced functionalities beyond those of conventional unipolar devices; however, achieving this behaviour using low-cost, stable materials remains challenging. Here, TiO 2 /CuI heterojunctions were engineered to achieve controllable bidirectional photocurrent by tuning interfacial and operational parameters. Five-layer spin-coated CuI films annealed at 200 °C showed the best response under 420 nm illumination at 20 mW cm −2 , reaching a responsivity of 0.302 μA W −1 over a 1 cm 2 active area. Integration with hydrothermally grown TiO 2 nanorod arrays increased the responsivity to 38.987 μA W −1 . Polarity switching is enabled by two key factors: controlling the CuI layer thickness and varying the wavelength of the incident light. Furthermore, optimizing the electrolyte concentration to 0.5 M Na 2 SO 4 yields significantly improved performance, which preserves the interfacial barrier and stabilizes charge separation. Additionally, dip-coated TiO 2 /CuI junctions exhibit pronounced wavelength-dependent bipolar switching with a responsivity of 11.190 μA W −1 under 420 nm illumination, whereas spin-coated junctions demonstrate bias-tuneable photocurrent polarity. These findings establish practical design rules for achieving reliable bipolar photocurrent in halide/oxide heterojunctions and highlight TiO 2 /CuI as a promising platform for tuneable PEC devices and photodetectors.