Camelia Florina Florica

Dr. Camelia Florina Florica

orcid

Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 April 2026 in Applied Physics Letters
Verified
Journal Article
Open access
ZJZixian Jiang
Zixian Jiang
ZLZhiyuan Liu
Zhiyuan Liu
TLTingang Liu
Tingang Liu
HCHaicheng Cao
Haicheng Cao
SYSaravanan Yuvaraja
Saravanan Yuvaraja
XLXiaohang Li
Xiaohang Li
In this work, enhancement-mode p-MOSFETs on p-GaN/AlGaN/GaN-on-Si substrates were fabricated using a gate recess process that combines reactive ion etching (RIE) with atomic layer etching (ALE), where ALE is employed as an interface engineering approach following conventional plasma etching to mitigate recess-induced interface damage. Compared with RIE-only devices, the RIE + ALE devices yield smoother surfaces and significantly suppress interface trap density. These interface improvements lead to enhanced subthreshold characteristics and markedly tighter device-to-device uniformity. In particular, the subthreshold swing decreased from 365 ± 179 to 149 ± 17 mV/dec, while the off-state leakage current was suppressed from 1.9 ± 3.6 × 10−7 to 8.5 ± 5.5 × 10−9 mA/mm. These results demonstrate that ALE provides an effective interface engineering approach for suppressing interface damage and enabling uniform enhancement-mode p-MOSFETs, highlighting its potential for reliable GaN complementary metal–oxide–semiconductor logic and power integrated circuits.

1 July 2026 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
MBMaysah Bakr
Maysah Bakr
RSRoaa Adnan Sait
Roaa Adnan Sait
CFCamelia Florina Florica
Camelia Florina Florica
Nuha A. AlhebshiNuha A. Alhebshi
Nuha A. Alhebshi
HAHala Aljawhari
Hala Aljawhari
Photoelectrochemical (PEC) systems capable of bipolar photocurrent switching offer advanced functionalities beyond those of conventional unipolar devices; however, achieving this behaviour using low-cost, stable materials remains challenging. Here, TiO 2 /CuI heterojunctions were engineered to achieve controllable bidirectional photocurrent by tuning interfacial and operational parameters. Five-layer spin-coated CuI films annealed at 200 °C showed the best response under 420 nm illumination at 20 mW cm −2 , reaching a responsivity of 0.302 μA W −1 over a 1 cm 2 active area. Integration with hydrothermally grown TiO 2 nanorod arrays increased the responsivity to 38.987 μA W −1 . Polarity switching is enabled by two key factors: controlling the CuI layer thickness and varying the wavelength of the incident light. Furthermore, optimizing the electrolyte concentration to 0.5 M Na 2 SO 4 yields significantly improved performance, which preserves the interfacial barrier and stabilizes charge separation. Additionally, dip-coated TiO 2 /CuI junctions exhibit pronounced wavelength-dependent bipolar switching with a responsivity of 11.190 μA W −1 under 420 nm illumination, whereas spin-coated junctions demonstrate bias-tuneable photocurrent polarity. These findings establish practical design rules for achieving reliable bipolar photocurrent in halide/oxide heterojunctions and highlight TiO 2 /CuI as a promising platform for tuneable PEC devices and photodetectors.

14 October 2026 in Inorganics
Verified
Journal Article
Open access
PDF file
AAAmal M. Al-Amri
Amal M. Al-Amri
GAGhadah Al-Harbi
Ghadah Al-Harbi
RSRoaa Adnan Sait
Roaa Adnan Sait
NENazek El-Atab
Nazek El-Atab
CFCamelia Florina Florica
Camelia Florina Florica
ASAhad Ali Syed
Ahad Ali Syed
This study introduces a novel fabrication strategy that combines photolithography with printed electronics to develop high-performance photodetectors (PDs) operating in the visible spectrum. CsPbBr3 perovskite quantum dot (QD)-based PDs with varying layer configurations were fabricated and characterized under 405 nm laser illumination at various intensities. The QDs were deposited onto pre-patterned, Au-coated substrates using a piezoelectric inkjet printer under ambient conditions. Under zero-bias operation, the optimized bilayer (2L) device exhibited an ultra-low dark current of 1.10 × 10−11 A, an elevated light current of 1.20 × 10−10 A, and an absolute photocurrent of 1.09 × 10−10 A. This configuration demonstrated excellent performance metrics, including a strong ON/OFF current ratio of 10.91, a calculated responsivity of 1.36 × 10−9 A/W, and a shot-noise-limited specific detectivity of 6.07 × 105 Jones. Furthermore, the device showed stable, self-powered operation under visible light, confirming its energy-efficient sensing capabilities. This work highlights the immense potential of hybrid lithographic and printing techniques for producing low-cost, scalable, and flexible perovskite-based photodetectors, providing a promising framework for next-generation optoelectronic systems, including wearable and environmental sensing technologies.

22 August 2026 in Nature Communications
Verified
Journal Article
Open access
JSJiyu Shen
Jiyu Shen
JCJun Cheng
Jun Cheng
YZYulun Zeng
Yulun Zeng
ZZZeyuan Zhang
Zeyuan Zhang
MYMan Yang
Man Yang
HDHaifeng Ding
Haifeng Ding
Spin-orbit torque magnetic random-access memory is a promising next-generation non-volatile memory technology featuring low power consumption, rapid operation, and high endurance. Conventional spin-orbit torque-induced deterministic perpendicular magnetization switching, however, typically requires the assistance of an external magnetic field. While multiple field-free switching strategies have been demonstrated, most suffer from significant limitations. Here, we present a straightforward and reliable approach for field-free switching of perpendicular magnetization utilizing two orthogonal electrical currents. The method employs only conventional heavy metals as spin current sources and enables seamless integration into existing manufacturing lines as it is fully compatible with standard fabrication processes for commercialized spin-transfer torque magnetic random-access memory. Notably, the approach also achieves ultrafast magnetization switching with robust immunity against external magnetic fields along all directions.

1 September 2026 in Small
Verified
Journal Article
Open access
RSRoaa Adnan Sait
Roaa Adnan Sait
SWShofarul Wustoni
Shofarul Wustoni
NANabeel Aslam
Nabeel Aslam
CFCamelia Florina Florica
Camelia Florina Florica
ADAndrea Diaz‐Gaxiola
Andrea Diaz‐Gaxiola
HAHala Aljawhari
Hala Aljawhari
The next generation of bioelectronic interfaces demands materials that integrate biocompatibility, robust electrochemical performance and architectural functionality. Here, we introduce a low‐temperature fabrication approach for patterned titanium oxide‐coated titanium carbide nanowires (P‐TiO 2 @TiC‐NWs), utilizing room‐temperature sputter deposition, avoiding high‐temperature carbide synthesis. TiO 2 @TiC‐NWs combine the high‐aspect‐ratio architecture of TiO 2 ‐NWs with the electrochemical performance of TiC, providing a tunable platform for bioelectronic interface design. By tuning sputtering pressure and duration, distinct TiC shell morphologies and compositions were engineered. Low‐pressure deposition produced a uniform conductive shell, favoring faster charge dynamics and a more ideal capacitive response, while high‐pressure deposition generated a carbon‐rich, cauliflower‐like morphology that increased electrochemically accessible surface area. TiO 2 @TiC‐NWs reached areal capacitances of 1.01 and 2.25 mF cm − 2 for 20 min deposition at 3 and 10 mTorr, respectively, compared with 117 µF cm − 2 and 1.35 mF cm − 2 for the corresponding planar TiC films. After 3000 cycles in physiological buffer, the 10 mTorr, 20 min sputtered sample retained 86% capacitance, while the 3 mTorr retained 75%. C2C12 myotubes cultured on P‐TiO 2 @TiC‐NW substrates exhibited preferential adhesion and directional alignment along the nanowire stripe axis, demonstrating the capacity of nanoscale surface topography to instruct anisotropic cell organization. Together, these features highlight P‐TiO 2 @TiC‐NWs as promising bioelectronic interfaces.