This study presents a multistep process of plasma-enhanced atomic layer deposition of ultrathin superconductive films of niobium nitride from metal organic precursor tris(diethylamido)(tert-butylimido)niobium(V). While using NH 3 /Ar and H 2 /Ar gas mixtures as reactants, a comprehensive analysis was performed pertaining to the influence of operating parameters, such as the duration of plasma exposure to the H 2 /Ar reactant, gas-flow ratio, plasma exposure duration and power of inductively coupled plasma source for the NH 3 /Ar reactant, on the obtained films’ parameters, such as resistivity, superconducting transition temperature and critical current density. Amorphous silicon oxide was used as the substrate. It was shown by experiments, that films’ resistivity affects the value of critical current density. As a result, the all-time record resistivity of 147 µ Ω·cm was achieved for films with a thickness of 8 nm. When cooling in the Gifford McMahon closed-cycle cryostat, the values of superconducting transition temperature and critical current density were equal to 12.3 К and 9 МА/cm 2 at a liquid helium temperature, respectively.
8 October 2021 in Superconductor Science and Technology
The influence of the buffer layer of hafnia dielectric (HfO 2 ) on the superconducting properties of niobium nitride films (NbN), produced by the technique of reactive magnetron depositing has been investigated for the first time. This study presents a comprehensive analysis of morphological, microstructural, and electrophysical parameters of thin NbN films. The dependence of transition critical temperature on the thickness of the HfO 2 buffer layer has been obtained. For the first time, it has been demonstrated that the superconducting properties of niobium nitride films at the HfO 2 buffer layer have high superconductive parameters, namely, Tc ∼ 13 K (with a the film thickness of approximately 30 nm) and high critical current density of approximately 10 7 A cm −2 . The relation between the thickness of the HfO 2 buffer layer with the critical current density of niobium nitride films has been determined. It appeared that the values of critical current density increase significantly up to 13 MA cm − 2 when the thickness of the hafnia buffer layer is more than 2 nm.
The problem of the fabrication of third-generation high-temperature superconductors (HTSCs) that are designed for the transmission of electric energy and the creation of nanoelectronic devices is...
19 December 2023 in Superconductor Science and Technology
This work focuses on the fabrication of niobium through silicon vias (TSV) superconductors interconnects. The effect of supercycle of sequential oxidation and chemical etching process on the through-etch wall quality was investigated. It was experimentally shown that the use of supercycle in the fabrication process leads to significant improvement of the TSV wall quality and removal of the defect type—scallops. After 12 times repetitions of supercycles a dissipative bonding of superconducting strips on the front and back side of the sample is observed. The critical current density of such coupling is 5 × 104 A cm−2. The critical ratio of substrate thickness to hole diameter at which electrical coupling is formed is 3:1.
The structure of buffer layers and deposited YBa2Cu3O x (Y123) films with a high critical current density (∼106 A/cm2) has been investigated by different methods. These superconducting films and...