12 October 2022 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
To investigate the driving performance of the flexible metal wheel of the manned lunar rover in a low gravity environment, we established a 3D discrete element method (DEM)-finite element method (FEM) coupling simulation system. The wheel was modeled by FEM and the soil was modeled by DEM. Then, the direct shear tests were performed to verify the validity of the DEM contact parameters. Finally, the driving performance of the flexible metal wheels with different treads under low gravity conditions was studied, and the velocity field of soil particles under the wheels was observed. The results show that the sinkage of the flexible wheel is almost independent of gravity, while the torque and drawbar pull are significantly affected by gravity. Moreover, by comparing the driving performance of the wheel equipped with treads (WT wheel) and without tread (NT wheel), it is found that the tread have great effect on sinkage, torque, and drawbar pull to wheel weight ratio due to the differences in wheel-soil contact area. Also, through the observation of the particle velocity field under the wheel, it is found that the gravity and load also have significant effects on the movement of soil particles. This study provided a reliable method for studies on the interaction between the flexible wheel and soil in low gravity environments.
6 March 2022 in Rendiconti Lincei. Scienze Fisiche e Naturali
27 June 2024 in Bioinspiration & Biomimetics
In order to enhance energy absorption, this study draws inspiration from the diagonal bilinear robust square lattice structure found in deep-sea glass sponges, proposing a design for thin-walled structures with superior folding capabilities and high strength-to-weight ratio. Firstly, the crashworthiness of bionic glass sponge tube (BGSTO) is compared with that of equal-wall-thickness equal-mass four-X tube through both experiments and simulations, and it is obtained that the specific energy absorption of BGSTO is increased by 78.64%. And the crashworthiness of BGSTO is also most significant compared to that of multicellular tubes with the similar number of crystalline cells. Additionally, we found that the double-line spacing of the glass sponge can be freely adjusted without changing the material amount. Therefore, based on BGSTO, we designed two other double-line structures, BGSTA and BGSTB. Then with equal wall thickness and mass as a prerequisite, this study proceeds to design and compare the energy absorption properties of three bilinear thin-walled tubes in both axial and lateral cases. The deformation modes and crashworthiness of the three types of tubes with variable bilinear spacing (βO/A/B
) are comparatively analysed. The improved complex proportional assessment (COPRAS) synthesis decision is used to obtain that BGSTO exhibits superior crashworthiness over the remaining two kinds of tubes. Finally, a surrogate model is established to perform multi-objective optimization on the optimal bilinear configuration BGSTO selected by the COPRAS method.
19 October 2021 in Microscopy Research and Technique
10 December 2019 in Science Progress
Lancet needle is a typical medical treatment device. Its tip consists of two lancet planes and one bevel plane. When the lancet needle is inserted into soft organ tissue, the insertion force may influence the needle cutting direction and treatment effect and increase the pain. One of the main factors affecting this insertion force is the geometry of the needle tip. Based on the research on the shape and processing method of the conventional lancet needle, a new lancet needle tip geometry was obtained by adjusting the relative position of the grinding wheel to the needle. A mathematical model of this new lancet needle was established. The relationship between processing parameters and needle shape was analyzed, and the needle insertion force was predicted. Compared with the conventional lancet needle, the new lancet needle is sharper, and the insertion force on the cutting edge is smaller. However, this change in the grinding position of the needle lancet plane has a great influence on the shape of needle tip near the intersection of the bevel plane and the lancet plane. Some special second bevel angle and rotated angle will cause a large change in the specific force at the intersection place, which is not conducive to reducing the insertion force.